Kapcsolók

2X(Mini SPST On/Off toggle switch.
The switch has 2 terminals and requires a panel cut-out diameter of 6mm.
Size: 13x7x9mm
On/Off SPST
Panel Cut-Out Diameter: 6mm
Rating: 3A 250VAC
Package Contents: 5 x On/Off Small Toggle Switch
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

5X(The flat base is made of metal material, the other portion is plastic, and it has a metal pin for a pivot.
Spring load safety flip cover for 12mm toggle switch, the cover should be opened once using toggle switch, when cover is closed, the toggle switch will return to its original position.
the toggle switch is not included.
Product Name: Toggle Switch Cover
Material: Plastic, Metal
Main Color: Red, Black
Total Size: 47 x 18 x 28mm/1.9 x 1 x 0.8 inch(L x W x H)
Fit for Thread Diameter: 12mm/0.47 inch
Net Weight: 70g
Package Content: 5 x Toggle Switch Cover
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.)

A miniature magnetic reed switch consisting of a glass body housing a pair of normally open contacts. When a magnetic is moved to within close proximity of the switch, the contacts become closed.
* Contact Rating: 10VA
* Switching Current: 1A
* Switc

A highly cost effective double pole, double throw miniature slide switch which can be PCB or chassis mounted.
* Contact Type: DPDT
* Contact Rating: 300mA
* Length: 23mm
* Width: 7.2mm
* Height: 14.2mm
* Fixing Centres: 19mm
* Fixing Hole Size: M

A simple, low cost but effective latching button with single pole, single throw contact and an internal LED which lights the actuator of the button red. As the contacts of the LED are separate, the LED can be used for status indication etc.This device mak

A good quality, reliable tilt sensitive switch in a gas filled hermetically sealed case which unlike traditional sensors does not contain mercury. Operation is simple, in its horizontal position, the two contacts are open. When the sensor is tilted to an

A low cost, standard size slide switch with solder connections. The switch has a Double Pole Double Throw contact which breaks, on switching, breaks one position before making the next.
* Contact Current Rating: 300mA
* Contact Voltage Rating: 125V AC

A Single Pole Single Throw (SPST) momentary tactile switch ideal for circuit or prototype board mounting.
Dimensions: 6 x 6 x 4 mm
Button Length: 9.5mm
Download a Full Datasheet
This Buy it Now is for a pack of 5 this item

A low cost but highly effective momentary miniature push button in Push to Break (PTB). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
* Contact Configuration: PTB
* Button Colour: Black
* Current Rating: 250

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
Contact Configuration:: PTM
Current Rating:: 250mA
Length:: 28mm
Diameter

A Single Pole Single Throw (SPST) momentary tactile switch ideal for circuit or prototype board mounting.
Dimensions: 6 x 6 x 4 mm
Button Length: 7mm
Download a Full Datasheet
This Buy it Now is for a pack of 5 this item

These Tactile Switch Coloured Button are for use with 6 x 6mm Tactile Switches
height: 5.5mm
Diameter: 4.5mm
Style: Round
This Buy it Now is for a pack of 10 this item

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
Contact Configuration:: PTM
Current Rating:: 250mA
Length:: 28mm
Diameter

Tilt switches. Non mercury. Rated 24v @ 1mA. Pin terminal connections.
Spiratronics Part Number: AQ1-592
Body Diameter: 4 mm
Contact Resistance: 10 R
Length: 11 mm
Operating Angle: 15°
Operating Temperature Range: 100 Deg C
Switching Current

Microswitches, lever type. Wide variety of applications. PCB solder pin connection. 12.7 x 5.8 x 6.65mm. Various contact ratings plus right hand, left hand and standard are included in this group.
Spiratronics Part Number: AQ1-593
Actuator Style: Le

A Single Pole Single Throw (SPST) momentary tactile switch ideal for circuit or prototype board mounting.
Dimensions: 6 x 6 x 4 mm
Button Length: 5mm
Download a Full Datasheet
This Buy it Now is for a pack of 5 this item

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
* Contact Configuration: PTM
* Button Colour: Red
* Current Rating: 250mA

A low cost single pole, double throw (on-on) miniature slide switch which is designed to be PCB mounted.
* Contact Type: SPDT
* Contact Rating: 200mA, 30V
* Length: 8.5mm
* Width: 5.5mm
* Height: 3.5mm
* Actuator Length: 4.4mm
Download a Full D

Rectangular miniature tactile switch. 6 x 3.5 x 5mm high. SPST. NO. 12v DC. 50mA.
Through hole mounting. Limited PCB use, not for PCB washing..
Spiratronics Part Number: AQ1-604
Actuator Colour: Brown
Actuator Style: Button
Actuator Travel: 0.25

A cost-effective, panel-mounting, latching switch ideal for a wide range of applications.
* Contact Rating @ 125 V AC: 3A
* Contact Rating @ 250 V AC: 1.5A
* Dimensions: 35mm x 10mm
* Panel Cut Out Diameter: 7mm
* Max Panel Thickness: 4mm
Downlo

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
Contact Configuration:: PTM
Current Rating:: 250mA
Length:: 28mm
Diameter

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
* Contact Configuration: PTM
* Button Colour: Black
* Current Rating: 250m

A panel mounting toggle switch supplied complete with mounting nuts and washers.
* Position 1: On (Latched)
* Position 2 (Centre): Off
* Position 3: On (Latched)
* Contact Arrangement: Single Pole, Double Throw
* Contact Rating: 5A
* Contact Volta

A large, attractive, metal-boddied push switch with a Single Pole, Single Throw momentary contact. This device comes with a large Red push-button.
* Contact Rating: 6A 125V AC/3A 250V AC
* Length: 24mm
* Diameter: 19mm
* Panel Cut Out: 16mm
Downl

SMD Tactile switch. 6 x 6mm SPST. N.O. 50mA 12v rated. Black round button actuator. Four terminal mounting.
Spiratronics Part Number: AQ1-607
Actuator Colour: Black
Actuator Style: Round Button
Actuator Travel: 0.25 mm
Contact Configuration: SPST

An ultra low profile push switch sitting at just 3.1mm high. Contained in a fully sealed unit and suitable for a wide range of applications.
Actuator Colour: Black
Actuator Style: Round
Actuator Travel: 0.25mm
Contact Configuration: SPST
Contact Cu

A Single Pole Single Throw (SPST) momentary tactile switch ideal for circuit or prototype board mounting.
* Button Length: 4.3mm
* Dimensions: 6 x 6 x 4 mm
Download a Full Datasheet
This Buy It Now is for a pack of 10 of this item

A black knob specially designed to attach on to the latching switch.
* Contact Type:
* Contact Rating:
* Length:
* Width: 6mm
* Height: 9mm
This 'Buy it Now' is for a pack of 5 of this item

A DIP switch ideal for setting modes and configurations on PCBs. This switch has an industry standard pitch DIP footprint so can be mounted on standard pitch PCBs.
This Buy it Now is for a pack of 2 of this item
We also offer this device in other

A multi-pole latching switch designed for direct PCB mounting.
* Contact Type: 2 Pole
* Contact Rating: 100mA, 30V
* Length: 25mm
* Width: 7.2mm
* Height: 9.1mm
NB. Not supplied with knob.
Download a Full Datasheet
This 'Buy it Now' is f

A panel mounting toggle switch supplied complete with mounting nuts and washers.
* Position 1: On (Latched)
* Position 2 (Centre): N/A
* Position 3: On (Latched)
* Contact Arrangement: Double Pole, Double Throw
* Contact Rating: 5A
* Contact Volta

Dry contact reed switch with Rhodium contacts. Low cost. Long life. Normally open.
standard and miniature versions represented in this collection.
Spiratronics Part Number: AQ1-601
Contact Configuration: NO
Sensor Type: Reed Switch
Switching Capa

A good quality, large rectangular Push-to-Make switch with Momentary contact configuration. The button requires a circular panel cut out with a 12mm diameter.
* Body Dimensions: 34 x 15 x 15 mm
* Contact Rating: 1A, 250V AC
* Contact Configuration: M

An ultra miniature single pole, doble throw (on-on) slide switch which is designed for either PCB or chassis mounting.
* Contact Type: SPDT
* Contact Rating: 500mA, 50Vdc
* Length: 19mm
* Width: 5.6mm
* Height: 5mm
* Panel Cut Out: 11.4mm x 5.6mm

A good quality, large rectangular Push-to-Make switch with Latching contact configuration. The button requires a circular panel cut out with a 12mm diameter.
* Body Dimensions: 34 x 15 x 15 mm
* Contact Rating: 1A, 250V AC
* Contact Configuration: La

A miniature slide switch with Single Pole, Double Throw (On-On) contact arrangements that is designed for direct PCB mounting. For additional mechanical stability the switch features a pair of body mounted metal contacts for PCB fixing although they can b

Change over switch, settable latching or momentary. 250v 0.2A rated. Solder tags and PCB pins on opposite sides.
Spiratronics Part Number: AQ1-583
Contact Configuration: 6PCO
Contact Current Rating: 0.2 A
Contact Resistance: 20 M Ohms
Contact Vol

A good quality, large rectangular Push-to-Make switch with Momentary contact configuration. The button requires a circular panel cut out with a 12mm diameter.
* Body Dimensions: 34 x 15 x 15 mm
* Contact Rating: 1A, 250V AC
* Contact Configuration: M

A low cost but highly effective momentary miniature push button in Push to Make (PTM). The button is ideal for chassis mounting and is supplied with a securing nut and washer.
Contact Configuration:: PTM
Current Rating:: 250mA
Length:: 28mm
Diameter

A very sensitive, compact non-mercury tilt switch that uses a gold plated contact ball and gold plated terminals for improved life and stability.The tilt switch is designed to trigger a suitable IC and is suitable for non-hazardous applicationsRequires su

A low profile, smart looking momentary single pole push button with a large 9mm plastic actuator and a metal bezel. This switch comes with a black push button which is push-to-break.
* Contact Type: SPST - Push to Break
* Contact Rating: 3A 125V AC or

A good quality, large rectangular Push-to-Make switch with Latching contact configuration. The button requires a circular panel cut out with a 12mm diameter.
* Body Dimensions: 34 x 15 x 15 mm
* Contact Rating: 1A, 250V AC
* Contact Configuration: La

A low profile, smart looking momentary single pole push button with a large 9mm plastic actuator and a metal bezel. This switch comes with a black push button is push-to-break.
* Contact Type: SPST - Push to Make
* Contact Rating: 3A 125V AC or 1.5A 2

A cost-effective chunky and robust toggle switch with clear on/off markings on a separate plate that can be mounted on the outside of the project box or panel being mounted on.
* Contact Arrangement: Double Pole Double Throw
* Contact Rating: 1.5A, 25