Huzal, kábel és vezeték

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Flex Cable: - Tear Resistant Polyimide (PI) with immersion Gold Finger contacts, each Cable was tested before shipping. - Two sided tape included allowing placement on the gimbal first at strategic points for easier beginner installation. - Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers. Fit for DJI Phantom 4 pro only,can not fit for Phantom 4 or 4 Advanced. Attention: this is not original parts,and due to the shooting light difference,there will be little difference between the parts and photos on the screen.
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Pitch Motor for DJI Phantom 4
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Color:Grey, Net weight: 13.4g, Package weight: 15.1g, Product size: 3*2.2*1.1cm, Package size: 12*8cm, Packing list: 1pcs Pitch motor Note: 1.Does not include the Other Accessories,suitable for phantom 4 only,does not suitable for phantom 4 Pro and other drone,
Yaw Motor for DJI Phantom 4/Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4, Phantom 4pro Color:Grey, Net weight: 14.7g, Package weight: 16.3g, Product size: 2.5*2.1*1.3cm, Package size: 12*8cm, Packing list: 1pcs Yaw motor Note: 1.Does not include the Other Accessories,
Pitch Motor for DJI Phantom 4pro
Feature: 1. Made of high-quality materials, reliable and durable, 2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free, 3. Long service life and easy installation. Description: Material: Metal, Applicable models: for Phantom 4pro, Color:Grey, Net weight: 12.5g, Package weight: 14.2g, Product size: 3.5*2.1*1cm, Package size: 12*8cm, Packing list: 1pcs P axis motor Note: 1.Does not include the Other Accessories,only suitable for Phantom 4 Pro drone,does not suitable for other drone,

Notice:please choose correct cable for your phone,if you don't know how to choose,please feel free to contact us.
Type 1 bundle:
Notice:the Type-C extension cable is only fit for phone with Typc-C charging port,can not fit IOS or Micro-USB phone.
Product include:
1 x extender pole
1 x Type-C extension cable(femele to mela cable,as the picture shows)
1 x mount moudle
Type 2 bundle:
Extension selfie stick extension charger cable osmo pocket mount adapter phone clip.
100cm extension cable: type-c to type-c, type-c to android, type-c to for iphone.(male to male cable,as the picture shows)
Extebsion selfie stick is extendable from 290mm to 920mm.
Osmo pocket /Pocket 2mount adapter module can be used with lots of photographical devices.
Please note: Take off the original data port or make it toward the inside when use the extension cable.
Mobile phone clip range: 60-85mm.
Product include:
1 x extender pole
1 x IOS/Type-C/Micro-USB extension cable.(male to male cable,as the picture shows)
1 x gimbal mount moudle
Not include the handheld gimbal and phone.

Notice:please choose correct cable for your phone,if you don't know how to choose,please feel free to contact us.
Type 1 bundle:
Notice:the Type-C extension cable is only fit for phone with Typc-C charging port,can not fit IOS or Micro-USB phone.
Product include:
1 x extender pole
1 x Type-C extension cable(femele to mela cable,as the picture shows)
1 x mount moudle
Type 2 bundle:
Extension selfie stick extension charger cable osmo pocket mount adapter phone clip.
100cm extension cable: type-c to type-c, type-c to android, type-c to for iphone.(male to male cable,as the picture shows)
Extebsion selfie stick is extendable from 290mm to 920mm.
Osmo pocket /Pocket 2mount adapter module can be used with lots of photographical devices.
Please note: Take off the original data port or make it toward the inside when use the extension cable.
Mobile phone clip range: 60-85mm.
Product include:
1 x extender pole
1 x IOS/Type-C/Micro-USB extension cable.(male to male cable,as the picture shows)
1 x gimbal mount moudle
Not include the handheld gimbal and phone.

Notice:please choose correct cable for your phone,if you don't know how to choose,please feel free to contact us.
Type 1 bundle:
Notice:the Type-C extension cable is only fit for phone with Typc-C charging port,can not fit IOS or Micro-USB phone.
Product include:
1 x extender pole
1 x Type-C extension cable(femele to mela cable,as the picture shows)
1 x mount moudle
Type 2 bundle:
Extension selfie stick extension charger cable osmo pocket mount adapter phone clip.
100cm extension cable: type-c to type-c, type-c to android, type-c to for iphone.(male to male cable,as the picture shows)
Extebsion selfie stick is extendable from 290mm to 920mm.
Osmo pocket /Pocket 2mount adapter module can be used with lots of photographical devices.
Please note: Take off the original data port or make it toward the inside when use the extension cable.
Mobile phone clip range: 60-85mm.
Product include:
1 x extender pole
1 x IOS/Type-C/Micro-USB extension cable.(male to male cable,as the picture shows)
1 x gimbal mount moudle
Not include the handheld gimbal and phone.

Notice:please choose correct cable for your phone,if you don't know how to choose,please feel free to contact us.
Type 1 bundle:
Notice:the Type-C extension cable is only fit for phone with Typc-C charging port,can not fit IOS or Micro-USB phone.
Product include:
1 x extender pole
1 x Type-C extension cable(femele to mela cable,as the picture shows)
1 x mount moudle
Type 2 bundle:
Extension selfie stick extension charger cable osmo pocket mount adapter phone clip.
100cm extension cable: type-c to type-c, type-c to android, type-c to for iphone.(male to male cable,as the picture shows)
Extebsion selfie stick is extendable from 290mm to 920mm.
Osmo pocket /Pocket 2mount adapter module can be used with lots of photographical devices.
Please note: Take off the original data port or make it toward the inside when use the extension cable.
Mobile phone clip range: 60-85mm.
Product include:
1 x extender pole
1 x IOS/Type-C/Micro-USB extension cable.(male to male cable,as the picture shows)
1 x gimbal mount moudle
Not include the handheld gimbal and phone.

Feature:
1. Using German Bayer PC 2805 material, anti-reflective hardening, three-layer coating waterproof, oil-proof, dust-proof, anti-collision, can prevent the camera lens from being scratched and impacted;
2. High light transmittance, clearly restore the rich shooting colors of the lens;
3. Precise fit, no gaps, no influence on shooting, and effective protection of the lens;
4. Powerful double-sided adhesive, convenient without leaving glue, not loose, and not easy to fall.
Description:
Material: Bayer PC 2805
Applicable models:for Insta360 ONE X2
Color:Transparent
Net weight: 2.9g
Package weight: 16.8g
Product size: 3.3cm in diameter
Package size: 10.3*8*2.2cm
Packing list:
2pcs Lens Guard
4pcs Spare double-sided adhesive sticker
1pcs Triangle prying tool
1pcs Manual
Note:
1.Does not include the Insta360 ONE X2 camera,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1.Professional Universal Mount for DJI OSMO Mobile 3/ DJI OSMO 1 /OSMO /OSMO Mobile 1 Handheld Gimbal 4K Camera Pro
2.The mount is an upgraded version of original,have more 1/4 inches screws than original,So mount more accessories will be very easy and conveniently.
3.High quality and very convenience to use,and 1/4 inch standard screw,Screw length is adjustable
4.The extention port can mount on bottom and top,support 4 extention port at once
5.With the univeral mount,The LED light and extera microphone and other accessories can be mounted on DJI OSMO Mobile 3,Four extending bayonets available, anyone of which can connect to other parts. The bayonet perfectly match with original bayonet, leaving no gap! 
6.Aviation aluminum processing anodic oxidation process high precision marking.
Description:
Material:Aluminum Alloy
Applicable models:for DJI OSMO Mobile 3,OM 4.
color:Black
Net weight:49.5g (short arm) 77.1g (long arm)
Package weight:134g
Product size:9*2.8*2cm (short arm) 3*12*2cm (long arm)
Package size:20*10.5cm
Packing list:
1 * Mount /Arm/Mount Arm option
Note:does not include the  OSMO Mobile 3 ,phone microphone ,cudeo light .

Feature:
1. Carbon fiber propeller, strong and durable, good rigidity, not easy to break,
2. Made of durable materials with high rigidity, providing strong pulling force for the aircraft,
3. Press design, quick release design, easy to disassemble and durable.
Description:
Material: carbon fiber
Applicable models: for Fimi X8 SE drone
Color: Black
Net weight: 17.8g (one pair), 35g (two pairs), 71.2g (Four pairs)
Package weight: 19g (one pair), 38.8g (two pairs), 76g (Four pairs)
Product size: 21.9*2.5*1.5cm
Package size:21*13.1cm (two pairs), 21*15cm (Four pairs)
Packing list:
2 pair Propeller or 4 pair Propeller
Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5.Carbon fiber propellers may have scratches on the surface of the blades during the production process. This is a normal phenomenon and does not affect its normal use. If you mind, please do not buy!

Feature:
1. Carbon fiber propeller, strong and durable, good rigidity, not easy to break,
2. Made of durable materials with high rigidity, providing strong pulling force for the aircraft,
3. Press design, quick release design, easy to disassemble and durable.
Description:
Material: carbon fiber
Applicable models: for Fimi X8 SE drone
Color: Black
Net weight: 17.8g (one pair), 35g (two pairs), 71.2g (Four pairs)
Package weight: 19g (one pair), 38.8g (two pairs), 76g (Four pairs)
Product size: 21.9*2.5*1.5cm
Package size:21*13.1cm (two pairs), 21*15cm (Four pairs)
Packing list:
2 pair Propeller or 4 pair Propeller
Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
5.Carbon fiber propellers may have scratches on the surface of the blades during the production process. This is a normal phenomenon and does not affect its normal use. If you mind, please do not buy!

Feature:
Specially designed for for FIMI X8 SE / FIMI X8 SE 2020 RC.
(lens cap)
1. Fit the fuselage design, stable, will not loose,
2. Provide multi-directional protection for the camera to prevent foreign objects from colliding and dust entering,
(Propeller guard)
1.High grade material made, durable and wear resistant.
2.High hardness, good toughness, improve the control experience.
3.While protecting the propeller, it can prevent the propeller from cutting people or objects.
4.Make flying safer and more secure.
(Landing Gear)
1.To prevent the gimble will be dirty or damage when taking off or landing
2.Widen stance to prevent tipping over during take off/landings,to eliminate potential safety hazards.
3.Undamage installation,Quick release design
4.Ultra-light weight, does not affect drone flight time.
5.The rear landing gears is mounted on the arm, more stable
6.Effective height increased by 2.6cm, to protect drones and gimbal camera.
Packing list:As shown in the figure.
Note:
1.Does not include Drone
2.When the drone is flying, please remove the gimbal camera lens cover
3.When installing the landing gear, install it according to A-front right , B-front left , C-back left , D- rear right.

Feature:
Specially designed for for FIMI X8 SE / FIMI X8 SE 2020 RC.
(lens cap)
1. Fit the fuselage design, stable, will not loose,
2. Provide multi-directional protection for the camera to prevent foreign objects from colliding and dust entering,
(Propeller guard)
1.High grade material made, durable and wear resistant.
2.High hardness, good toughness, improve the control experience.
3.While protecting the propeller, it can prevent the propeller from cutting people or objects.
4.Make flying safer and more secure.
(Landing Gear)
1.To prevent the gimble will be dirty or damage when taking off or landing
2.Widen stance to prevent tipping over during take off/landings,to eliminate potential safety hazards.
3.Undamage installation,Quick release design
4.Ultra-light weight, does not affect drone flight time.
5.The rear landing gears is mounted on the arm, more stable
6.Effective height increased by 2.6cm, to protect drones and gimbal camera.
Packing list:As shown in the figure.
Note:
1.Does not include Drone
2.When the drone is flying, please remove the gimbal camera lens cover
3.When installing the landing gear, install it according to A-front right , B-front left , C-back left , D- rear right.

Feature:
Specially designed for for FIMI X8 SE / FIMI X8 SE 2020 RC.
(lens cap)
1. Fit the fuselage design, stable, will not loose,
2. Provide multi-directional protection for the camera to prevent foreign objects from colliding and dust entering,
(Propeller guard)
1.High grade material made, durable and wear resistant.
2.High hardness, good toughness, improve the control experience.
3.While protecting the propeller, it can prevent the propeller from cutting people or objects.
4.Make flying safer and more secure.
(Landing Gear)
1.To prevent the gimble will be dirty or damage when taking off or landing
2.Widen stance to prevent tipping over during take off/landings,to eliminate potential safety hazards.
3.Undamage installation,Quick release design
4.Ultra-light weight, does not affect drone flight time.
5.The rear landing gears is mounted on the arm, more stable
6.Effective height increased by 2.6cm, to protect drones and gimbal camera.
Packing list:As shown in the figure.
Note:
1.Does not include Drone
2.When the drone is flying, please remove the gimbal camera lens cover
3.When installing the landing gear, install it according to A-front right , B-front left , C-back left , D- rear right.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. The filter adopts a magnetic structure, and the assembly can be completed quickly through the filter adapter,
2.Imported Japanese Asahi Glass,
3.After installing the filter, improve the texture and level of the creative scene and improve the shooting quality,
4.Compact and portable, equipped with exquisite lens storage box.
Description:
Material: Asahi Glass
Applicable models: for Mavic Mini
Color: Black
Net weight: 0.7g
Package weight: 67.7g (CPL), 71.2g (6 filter sets), 70.5g (5 filter sets)
Product size: 2.11*1.13*0.38cm
Packing list:
CPL: CPL*1;
ND 5IN1: ND4 ND8 ND16 ND32 UV *1;
ND PL 5IN1: ND4/PL ND8/PL ND16/PL ND32/PL UV *1;
6 IN 1: ND4 ND8 ND16 ND4/PL ND8/PL ND16/PL *1.
(According to your choice, you will get the corresponding product.)
Note:Does not include the Drone.

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair parts, used for accidental damage replacement, making repairs more worry-free,
3. Long service life and easy to install.
Description:
Material: Plastics
Applicable models: for Mavic 2 Pro/zoom
Color: Grey
Net weight: 18.2g (single), 36.2g (two-piece front), 33.1g (two-piece for back ), 69.4g (four-piece)
Package weight: 21.4g (single), 39.3g (two-piece forefoot), 36.3g (two-piece for back foot), 72.6 (four-piece)
Product size: 14.2*2.2*2.5cm (front foot), 13.2*2.2*1.7cm (rear foot)
Package size: 17*11cm
Packing list:
1pcs Maintenance arm
Note:
1.Does not include the drone, motor,landing gear and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair parts, used for accidental damage replacement, making repairs more worry-free,
3. Long service life and easy to install.
Description:
Material: Plastics
Applicable models: for Mavic 2 Pro/zoom
Color: Grey
Net weight: 18.2g (single), 36.2g (two-piece front), 33.1g (two-piece for back ), 69.4g (four-piece)
Package weight: 21.4g (single), 39.3g (two-piece forefoot), 36.3g (two-piece for back foot), 72.6 (four-piece)
Product size: 14.2*2.2*2.5cm (front foot), 13.2*2.2*1.7cm (rear foot)
Package size: 17*11cm
Packing list:
1pcs Maintenance arm
Note:
1.Does not include the drone, motor,landing gear and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair parts, used for accidental damage replacement, making repairs more worry-free,
3. Long service life and easy to install.
Description:
Material: Plastics
Applicable models: for Mavic 2 Pro/zoom
Color: Grey
Net weight: 18.2g (single), 36.2g (two-piece front), 33.1g (two-piece for back ), 69.4g (four-piece)
Package weight: 21.4g (single), 39.3g (two-piece forefoot), 36.3g (two-piece for back foot), 72.6 (four-piece)
Product size: 14.2*2.2*2.5cm (front foot), 13.2*2.2*1.7cm (rear foot)
Package size: 17*11cm
Packing list:
1pcs Maintenance arm
Note:
1.Does not include the drone, motor,landing gear and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair parts, used for accidental damage replacement, making repairs more worry-free,
3. Long service life and easy to install.
Description:
Material: Plastics
Applicable models: for Mavic 2 Pro/zoom
Color: Grey
Net weight: 18.2g (single), 36.2g (two-piece front), 33.1g (two-piece for back ), 69.4g (four-piece)
Package weight: 21.4g (single), 39.3g (two-piece forefoot), 36.3g (two-piece for back foot), 72.6 (four-piece)
Product size: 14.2*2.2*2.5cm (front foot), 13.2*2.2*1.7cm (rear foot)
Package size: 17*11cm
Packing list:
1pcs Maintenance arm
Note:
1.Does not include the drone, motor,landing gear and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair parts, used for accidental damage replacement, making repairs more worry-free,
3. Long service life and easy to install.
Description:
Material: Plastics
Applicable models: for Mavic 2 Pro/zoom
Color: Grey
Net weight: 18.2g (single), 36.2g (two-piece front), 33.1g (two-piece for back ), 69.4g (four-piece)
Package weight: 21.4g (single), 39.3g (two-piece forefoot), 36.3g (two-piece for back foot), 72.6 (four-piece)
Product size: 14.2*2.2*2.5cm (front foot), 13.2*2.2*1.7cm (rear foot)
Package size: 17*11cm
Packing list:
1pcs Maintenance arm
Note:
1.Does not include the drone, motor,landing gear and other accessories,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
5.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Shoulder Bag for Zhiyun Weebill-S Carrying Case Stabilizer Protective Storage Box Waterproof Handbag for Weebill-s Accessories
---------PU Shoulder bag
Feature:
Suitable for Zhiyun weebill s shoulder bag,
1.Preferred materials, exquisite workmanship, beautiful lines, and extraordinary quality,
2.Two-way zipper with high quality slider to ensure machine safety.
3.Waterproof surface,very smooth and comfortable,very durable.
Description:
Material: PU
Applicable models: for ZhiYun weebill s
Net weight: 920g (Storage bag)
Packing list:
1pcs Storage bag
Note:Does not include Zhiyun Weebill-s and other accessories.
-------- Fabric bag no liner
Storage bag capacity:
a. Zhiyun weebill s handheld gimbal
b.Tripod
c. Data line box
d. Quick plate assembly
e. Increase the pad
f. Battery
g. Charger
Description:
This shoulder bag is just fit for original foam liner,it don't include the foam liner,
Light weight and comfortable,the fabric is very durable.
Net weight: about 600g,
Product size: 35*27*10cm,
Product include:1 pcs shoulder bag,
Not include the original foam liner and not include Weebill S gimbal .

Shoulder Bag for Zhiyun Weebill-S Carrying Case Stabilizer Protective Storage Box Waterproof Handbag for Weebill-s Accessories
---------PU Shoulder bag
Feature:
Suitable for Zhiyun weebill s shoulder bag,
1.Preferred materials, exquisite workmanship, beautiful lines, and extraordinary quality,
2.Two-way zipper with high quality slider to ensure machine safety.
3.Waterproof surface,very smooth and comfortable,very durable.
Description:
Material: PU
Applicable models: for ZhiYun weebill s
Net weight: 920g (Storage bag)
Packing list:
1pcs Storage bag
Note:Does not include Zhiyun Weebill-s and other accessories.
-------- Fabric bag no liner
Storage bag capacity:
a. Zhiyun weebill s handheld gimbal
b.Tripod
c. Data line box
d. Quick plate assembly
e. Increase the pad
f. Battery
g. Charger
Description:
This shoulder bag is just fit for original foam liner,it don't include the foam liner,
Light weight and comfortable,the fabric is very durable.
Net weight: about 600g,
Product size: 35*27*10cm,
Product include:1 pcs shoulder bag,
Not include the original foam liner and not include Weebill S gimbal .

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Only Applicable models: for Mavic Pro Platinum Intelligent,
Packing list:
Repair top cover * 1
or Repair middle frame * 1
or Repair bottom case * 1
or Repair arm * 1
Note:Does not include the Drones and other accessories.

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free,
3. Long service life and easy installation.
Description:
Material: Copper
Applicable models: for Mavic 2 Zoom/Pro
Color: Black
Net weight: 1g
Package weight: 4.5g
Product size: 14*1.7cm
Package size: 20*10cm
Packing list:
1pcs Signal line
Note:
1.Does not include the Other Accessories,
2. Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, reliable and durable,
2. Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free,
3. Long service life and easy installation.
Description:
Material: Copper
Applicable models: for Mavic 2 Zoom/Pro
Color: Black
Net weight: 1g
Package weight: 4.5g
Product size: 14*1.7cm
Package size: 20*10cm
Packing list:
1pcs Signal line
Note:
1.Does not include the Other Accessories,
2. Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Landing Gear.
Feature:
1. Increase the height between the fuselage and the ground to protect the FIMI X8 SE fuselage from impact,
2. Effectively increase the height of 32mm to effectively prevent ground debris from contaminating the body or damaging the gimbal and camera during takeoff and landing,
3. Lightweight and durable,
4. Easy to disassemble and install
Description:
Material: ABS,
Applicable models: for FIMI X8 SE 2020,
Color: White,
Net weight: 30.8g,
Package weight: 101g,
Product size: 14.5*12*5.1cm,
Package size: 14*13*5.5cm,
Packing list:
1pcs Landing Gear.
Note:
1. Does not include the drone and other accessories,
2. Transition: 1cm=10mm=0.39inch,
3. Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4. Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
Type A
Feature:
1. Increase the height between the fuselage and the ground to protect the FIMI X8 SE fuselage from impact,
2. Effectively increase the height of 32mm to effectively prevent ground debris from contaminating the body or damaging the gimbal and camera during takeoff and landing,
3. Lightweight and portable, easy to install and remove,
4. The protection ring has high hardness and good toughness, which improves the control experience,
5. While protecting the propeller, it can prevent the propeller from cutting people or objects.
Description:
Material: ABS PC
Applicable models: for FIMI X8 SE 2020

Landing Gear.
Feature:
1. Increase the height between the fuselage and the ground to protect the FIMI X8 SE fuselage from impact,
2. Effectively increase the height of 32mm to effectively prevent ground debris from contaminating the body or damaging the gimbal and camera during takeoff and landing,
3. Lightweight and durable,
4. Easy to disassemble and install
Description:
Material: ABS,
Applicable models: for FIMI X8 SE 2020,
Color: White,
Net weight: 30.8g,
Package weight: 101g,
Product size: 14.5*12*5.1cm,
Package size: 14*13*5.5cm,
Packing list:
1pcs Landing Gear.
Note:
1. Does not include the drone and other accessories,
2. Transition: 1cm=10mm=0.39inch,
3. Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4. Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
Type A
Feature:
1. Increase the height between the fuselage and the ground to protect the FIMI X8 SE fuselage from impact,
2. Effectively increase the height of 32mm to effectively prevent ground debris from contaminating the body or damaging the gimbal and camera during takeoff and landing,
3. Lightweight and portable, easy to install and remove,
4. The protection ring has high hardness and good toughness, which improves the control experience,
5. While protecting the propeller, it can prevent the propeller from cutting people or objects.
Description:
Material: ABS PC
Applicable models: for FIMI X8 SE 2020

Features:  
To increase the height between the fuselage and the ground by 2.8cm, so as to protect the gimbal and the battery for the DJI Spark from being hit in landing.
It can protect the personal safety of the user better when the aerial vehicle takes off for the palm of the user
Lightweight ,does not have any negative impact on the flying for Spark drone
Quick installation and disassemble design
3 color for choice: Black, Gray, Red
 
Packing includes:
1*Landing Bracket Extension legs for DJI Spark 

Features:  
To increase the height between the fuselage and the ground by 2.8cm, so as to protect the gimbal and the battery for the DJI Spark from being hit in landing.
It can protect the personal safety of the user better when the aerial vehicle takes off for the palm of the user
Lightweight ,does not have any negative impact on the flying for Spark drone
Quick installation and disassemble design
3 color for choice: Black, Gray, Red
 
Packing includes:
1*Landing Bracket Extension legs for DJI Spark 

Features:  
To increase the height between the fuselage and the ground by 2.8cm, so as to protect the gimbal and the battery for the DJI Spark from being hit in landing.
It can protect the personal safety of the user better when the aerial vehicle takes off for the palm of the user
Lightweight ,does not have any negative impact on the flying for Spark drone
Quick installation and disassemble design
3 color for choice: Black, Gray, Red
 
Packing includes:
1*Landing Bracket Extension legs for DJI Spark 

Advantages of carbon fiber propellers:
1.Carbon fibre props produce less vibration due to its stiffness, and it sounds quieter compare to plastic propellers.
2.They are lighter and significantly stronger than plastic when crashed, but not indestructible though.
3.Light weight props means less inertia, thus faster motor speed change, and the control feels more responsive.
 
Disadvantages: 
1.Due to different production processes, the surface of carbon fiber propeller may have scratches during the production process, which is not as smooth as plastic propeller,
2.Carbon Fibre props has slightly shorter flight time than plastic prop of the same size/pitch prop.
High gloss 3K twill finish
More strength, light weight, High efficient carbon fiber propeller,
High hardness and elastic deformation is very small,
which can increase the flexibility of the aircraft,
stable connection, easy to install, good for each blade.
 
Specifications:
Color:Black
Size: 10*4.5
Material: Carbon fiber
Note: Due to the difference between different monitors, the picture may not reflect  the actual color of the item. Thank you!
  
Package List:
1 x CW Propeller
1 x CCW Propeller
2 x Washers(no retail package)

Feature:
1. Made of high-quality materials, drop-proof, dust-proof and wear-resistant,
2. Shock absorption and fall prevention, protect the propeller and prevent the propeller from being crushed,
3. Portable travel, the storage box can be stored in the backpack,
4. Small and light, easy to carry.
Description:
Material: PC ABS
Applicable models: for FPV drone
Color: Black
Net weight: 62.7g (storage box), 87.2g (storage box paddle 2 pairs)
Package weight: 82.7g (storage box), 101.4g (storage box paddle 2 pairs)
Product size: 12.3*3*4.8cm (storage box), 11.8*11.8*1.05cm, 6.7cm (radius) blade
Packing size: 13*12*5cm (single product), 28.2*20cm (set)
Packing list:
Bundle 1:
1 pcs Storage box
Bundle 2:
1 pcs Storage box
4 pcs propeller
Note:
1.Does not include the Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Made of high-quality materials, drop-proof, dust-proof and wear-resistant,
2. Shock absorption and fall prevention, protect the propeller and prevent the propeller from being crushed,
3. Portable travel, the storage box can be stored in the backpack,
4. Small and light, easy to carry.
Description:
Material: PC ABS
Applicable models: for FPV drone
Color: Black
Net weight: 62.7g (storage box), 87.2g (storage box paddle 2 pairs)
Package weight: 82.7g (storage box), 101.4g (storage box paddle 2 pairs)
Product size: 12.3*3*4.8cm (storage box), 11.8*11.8*1.05cm, 6.7cm (radius) blade
Packing size: 13*12*5cm (single product), 28.2*20cm (set)
Packing list:
Bundle 1:
1 pcs Storage box
Bundle 2:
1 pcs Storage box
4 pcs propeller
Note:
1.Does not include the Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!

Feature:
1. Increase the landing gear to effectively increase the height of the drone by 3 cm to prevent debris from contaminating the drone or damaging the lens,
2. Small and light, weighing only 15.3 grams, will not bring too much burden to the flight,
3. Multifunctional bottom reinforced type, more stable, two-in-one landing gear and handheld landing gear,
4. Ingenious design, easy to install and disassemble.
Description:
Material: ABS
Applicable models: for Mini 2/Mini SE
Color: Gray
Net weight: 15.3g
Package weight: 36.6g
Product size: 14.5*5*2cm
Package size: 16*8.5*2cm
Packing list:
1set landing gear
Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
Extended Landing Gear for Mini 2
Description:
Material: ABS
Applicable models: for Mini 2
Color: Gray
Net weight: 15.3g
Package weight: 36.6g
Product size: 14.5*5*2cm
Package size: 16*8.5*2cm
Packing list:
1set landing gear

Folding Landing Gear for DJI MINI 2
Description:
Material: ABS,
Applicable models: for MINI 2,
Color: Gray,
Net weight: 10.4g,
Package weight: 12.5g,
Product size: 5.2*2.1*1.4cm (front feet), 4.1*1.2*0.9*cm (back feet),
Package size: 9.7*6.6*1.6cmcm,
Packing list:
1 set Landing Gear
Note:
1.Does not include the Drone and other accessories,
2.Transition: 1cm=10mm=0.39inch,

For Mini 2 Propellers
Description:
Material: PC
Applicable models: for Mini 2
Color: Orange Edge
Net weight: 5.6g (2 pairs)
Gross weight: 13.2g (2 pairs)
Product size: 11.938 × 6.604cm (diameter × pitch)
Packing size: 6.6*1.3*4.1cm (2 pairs of boxes)
packing list:
2 pairs: (boxed)
Propeller (pair) × 2
Screw × 12
Screwdriver × 1
Note:
1.Does not include Drone,

Lens Hood For Mini 2 Accessories
Description:
Material: ABS
Applicable models: for Mavic Mini/Mini 2
Color: Black
Net weight: 5.2g
Package weight: 11.3g
Product size: 5.6 * 3.6 * 3.4cm
Package size: 5.7*5.7*4cm
Packing list:
1pcs Lens Hood
Note:
1.Does not include Drone,
For Mini 2 Quick Release Anti-collision Protective Ring Propeller Guards Accessory
Description:
Material: ABS, PC,
Applicable models: for Mini 2,
Color: Gray,
Net weight: 53g,
Package weight: 145.3g,
Product size: 8cm in radius, 4.5cm in height (single),
Package size: 27.5*17*5cm,
Packing list:
4pcs Propeller Guard
Note:
1.Does not include Drone,

Feature:
1. Increase the landing gear to effectively increase the height of the drone by 3 cm to prevent debris from contaminating the drone or damaging the lens,
2. Small and light, weighing only 15.3 grams, will not bring too much burden to the flight,
3. Multifunctional bottom reinforced type, more stable, two-in-one landing gear and handheld landing gear,
4. Ingenious design, easy to install and disassemble.
Description:
Material: ABS
Applicable models: for Mini 2/Mini SE
Color: Gray
Net weight: 15.3g
Package weight: 36.6g
Product size: 14.5*5*2cm
Package size: 16*8.5*2cm
Packing list:
1set landing gear
Note:
1.Does not include Drone,
2.Transition: 1cm=10mm=0.39inch,
3.Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
4.Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you!
Extended Landing Gear for Mini 2
Description:
Material: ABS
Applicable models: for Mini 2
Color: Gray
Net weight: 15.3g
Package weight: 36.6g
Product size: 14.5*5*2cm
Package size: 16*8.5*2cm
Packing list:
1set landing gear

Folding Landing Gear for DJI MINI 2
Description:
Material: ABS,
Applicable models: for MINI 2,
Color: Gray,
Net weight: 10.4g,
Package weight: 12.5g,
Product size: 5.2*2.1*1.4cm (front feet), 4.1*1.2*0.9*cm (back feet),
Package size: 9.7*6.6*1.6cmcm,
Packing list:
1 set Landing Gear
Note:
1.Does not include the Drone and other accessories,
2.Transition: 1cm=10mm=0.39inch,

For Mini 2 Propellers
Description:
Material: PC
Applicable models: for Mini 2
Color: Orange Edge
Net weight: 5.6g (2 pairs)
Gross weight: 13.2g (2 pairs)
Product size: 11.938 × 6.604cm (diameter × pitch)
Packing size: 6.6*1.3*4.1cm (2 pairs of boxes)
packing list:
2 pairs: (boxed)
Propeller (pair) × 2
Screw × 12
Screwdriver × 1
Note:
1.Does not include Drone,

Lens Hood For Mini 2 Accessories
Description:
Material: ABS
Applicable models: for Mavic Mini/Mini 2
Color: Black
Net weight: 5.2g
Package weight: 11.3g
Product size: 5.6 * 3.6 * 3.4cm
Package size: 5.7*5.7*4cm
Packing list:
1pcs Lens Hood
Note:
1.Does not include Drone,
For Mini 2 Quick Release Anti-collision Protective Ring Propeller Guards Accessory
Description:
Material: ABS, PC,
Applicable models: for Mini 2,
Color: Gray,
Net weight: 53g,
Package weight: 145.3g,
Product size: 8cm in radius, 4.5cm in height (single),
Package size: 27.5*17*5cm,
Packing list:
4pcs Propeller Guard
Note:
1.Does not include Drone,