Huzal, kábel és vezeték

10PCS LM317T L7805 L7806 L7808 L7809 L7910 L7812 L7815 L7818 L7824 new and original IC Chipset TO-220 L7805CV

100% Brand new and high quality!
Simple and stylish design.
Great for repairing, replacing or making a clock.
Easy and convenient to use.
Specifications:
Material: Plastic & Aluminum
Powered supply:1*AA battery (not included)
Color:Black
Size:56*56*15mm
 

 
 
 
 
Introduction
 
1: The new original XLSEMI chip, eliminate fake, disassemble chip.
 
2: Imported SMD electrolytic capacitors, not accompanied by homemade capacitance.
 
3: Up to 220Khz operating frequency, and LC filter circuit, output ripple is very low.
 
4: Import TDK inductors, the heat and noise to a minimum.
 
6: Input and output three MLCC Multilayer ceramic capacitors, interference enhance stability.
 
7: PCB use kb of A grade sheet material, to prevent cardboard, garbage plate.
 
8: Built-in MOSFET, the LM2577 built-triode say goodbye, can reach 94% efficiency.
 
9: Increased enable the port, you can control whether the boost circuit.
 
10: Dimensions: 49 (L) * 23.4 (W) * 11.4 (H) mm (excluding potentiometer)
 
 
Parameters
 
Module Properties: non-isolated step-up & down module (BOOST & Buck)
 
Input voltage: 5-32V
 
Output voltage: (1) continuously adjustable (1.3-35V)
 
Output Current: 1.5A (MAX)
 
Input Current: 4A (MAX)
 
Output power: natural cooling 20W, plus heat sink 25W (MAX) real power
 
Maximum output power = input voltage conversion efficiency * 4A *conversion efficiency
 
Conversion efficiency: the efficiency of the measured voltage and current commonly used (hereinafter, for reference only)
 

New Product Introduction:
 
1: The new United States imported chips, definitely not homemade chips, disassemble chip.
 
2: The maximum output current 3A, long-running 2.1A, sufficient margin.
 
3: The new design, circuit design does not require electrolytic capacitors and tantalum capacitors (electrolytic capacitor life is short, tantalum risk of explosion). Now with the use of high-end large-size solid ceramic capacitor circuit (MCC) 2 Ke.
 
4: The new program uses synchronous rectification circuit conversion efficiency is very high, in turn 5V 0.7A 6.5V when efficiency up to 97.5% , 12V turn 5V 1A, they also reached 94% , unlike some peers efficiency is only 60-70% . (Efficiency test removed the input reverse polarity protection diode and fuse drop).
 
5: Big shielded inductor current, low resistance, to maximize conversion efficiency. Reduce heat.
 
6: Ultra-small size, 20 (L) * 11 (W) * 5 (H) mm, the whole network to a minimum.
 
7: Ultra-low quiescent current, quiescent current of 0.85 mA. Connected to the car battery without adding switches can be connected to the cigarette lighter line or the ACC power cable line.
 
8: Output Integrated adjustable and fixed voltage, fixed output does not need customization, direct can be very voltage, potentiometer can adjust, versatility is very strong on the board under the spot welding
 
9: Integration enabled port, default mode of operation, low close, bring convenience to control

Features:
Tesla coil is a transformer (resonant transformer) that operates on the principle of resonance.
It can produce high-temperature and high-pressure plasma, and can ignite, wirelessly transmit electricity, illuminate fluorescent lamps. It has wonderful arcs and used for many fun and very interesting scientific experiments.
This product is newly developed. The primary coil is already in the PCB board. It does not need to be wound on the outside. It is convenient for fans to install, high efficiency and beautiful. It is a new design.
If you choose DIY Tesla Coil Kit parts, it needs to be soldered and assembled by yourself. Tools needed: soldering iron, glue gun, water pliers, etc.
Specification:
Type: 01#: Parts, 02#: Finished product
Input voltage: 9-12V, can be started with 9V battery, but if there is an arc, the working voltage needs 12V.
PCB board size: 3.1x4cm/1.22x1.57inch
Color: As shown
Quantity: 1 Set
 
Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x PCB board
1 x Coil
2 x 3MM LED Blue
1 x DC005 seat
2 x 105 monolithic capacitor
1 x 8x8 self-locking switch
2 x 10K resistor
1 x 15x10x20 small heat sink
1 x 3x6 screw
1 x BD243
1 x Bubble
4 x M2x4 screw
4 x M2x7 double pass copper column

Features:
Tesla coil is a transformer (resonant transformer) that operates on the principle of resonance.
It can produce high-temperature and high-pressure plasma, and can ignite, wirelessly transmit electricity, illuminate fluorescent lamps. It has wonderful arcs and used for many fun and very interesting scientific experiments.
This product is newly developed. The primary coil is already in the PCB board. It does not need to be wound on the outside. It is convenient for fans to install, high efficiency and beautiful. It is a new design.
If you choose DIY Tesla Coil Kit parts, it needs to be soldered and assembled by yourself. Tools needed: soldering iron, glue gun, water pliers, etc.
Specification:
Type: 01#: Parts, 02#: Finished product
Input voltage: 9-12V, can be started with 9V battery, but if there is an arc, the working voltage needs 12V.
PCB board size: 3.1x4cm/1.22x1.57inch
Color: As shown
Quantity: 1 Set
 
Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x PCB board
1 x Coil
2 x 3MM LED Blue
1 x DC005 seat
2 x 105 monolithic capacitor
1 x 8x8 self-locking switch
2 x 10K resistor
1 x 15x10x20 small heat sink
1 x 3x6 screw
1 x BD243
1 x Bubble
4 x M2x4 screw
4 x M2x7 double pass copper column

 
 
 
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ° ~ 70 °
Character Colors: White
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
 
 
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
 

 
 
 
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ° ~ 70 °
Character Colors: White
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
 
 
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
 

 
 
 
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ° ~ 70 °
Character Colors: White
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
 
 
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
 

 
 
 
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with for Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ° ~ 70 °
Character Colors: White
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
 
 
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
 

 
 
Wireless Stereo FM Radio Receiver Module PCB FM DIY Electronic Kits 76MHz-108MHz DC 1.8V-3.6V
Kit Purpose:
1, Suite variety of electronic components: a plurality of electronic components, resistors, capacitors, inductors, diodes, integrated circuits, headphone jack, buttons, etc., many kinds of basic components.
2, learning electronics.
3, practical ability.
4, is particularly suitable for use epoxy PCB welding students use rather than for general use paper-based board!
Frequency range: FM 76-108MHz
 
Advantages:
Electronic enthusiasts or electronic production of electronic student classes, in particular to optimize the arrangement of the elements according to the beginner, this package easy to manufacture and install a high success rate! As it has been used in many schools, so we know its performance. This kit is not just welding assembly, as well as adjust their own hands and the coiled coil, more fun, this is better than the other simply assembly kit. The main advantage of using the headset also takes into account the student's classroom noise!
 
Features and use:
FM radio program has a rich, good sound quality, etc.All over launch its own FM radio station. The kit FM scan radio pocket computers using special blocks, 16-pin dual flat package, the working voltage of 1.8-3.6V, the circuit includes a FM radio receiver from antenna to the frequency discriminator output audio signals of all the features, it also has search tuning circuit, the signal detection circuit, a mute circuit and compression frequency offset of the frequency-locked loop FLL circuit. IF frequency of the circuit is designed to 70KHZ, peripheral circuits without intermediate frequency transformer, wherein the frequency is selected by an internal RC circuit IF filter to complete. Aircraft such as digital radio tuner that uses electrical tuning buttons (SEEK , SEEK-), in addition to the volume control buttons (VOL , VOL-) and the power button (PW). After the circuit is powered on, press the power button, the circuit starts to work, press SEEK to search for high-frequency or low-end press SEEK- radio frequency search, automatic search for radio signals, tuning automatically stops, then click on the Search button if The circuit continues to search for radio stations. Frequency range is 76-108MHZ. Both receive Universal FM FM station can be received school campus radio station. 

Input: 6V-40V
 
Output: 5V/3A (MAX)
 
Efficiency: 92% (MAX)
 
Switching frequency: 150KHZ
 
Working temperature: -40℃- 85℃
 
Baby size: L_59mm*W_21mm*H_17mm
 
Load capacity: maximum output 3A (can bring two mobile phones at the same time)
 
Scope of application: USB5V powered devices such as mobile power supplies, mobile phones, tablets, etc.

This analog capacitive soil moisture sensor measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor
It is made of a corrosion resistant material giving it a long service life
Insert it into soil and impress your friends with the real-time soil moisture data
This module includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V
This sensor is compatible with DFRobot 3-pin "Gravity" interface, which can be directly connected to the Gravity I/O expansion shield
 
Features:
Supports 3-Pin Gravity Sensor interface
Analog output
 
Applications:
Garden plants
Moisture detection
Intelligent agriculture
 
Specifications:
Operating Voltage: DC 3.3-5.5V
Output Voltage: DC 0-3.0V
Interface: PH2.0-3P
Size: 99x16mm/3.9x0.63"
Quantity: 1 Set
 
Note:
Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
 
No Retail Package
Package Includes:
1 x Capacitive Soil Moisture Sensor
1 x Analog Sensor Cable

The main features
Wide power supply voltage of 1.71 V to 3.6 V
Independent IO power supply (1.8 V) and the power supply voltage compatible
Ultra-low power consumption of plus or minus 2 g / / 6 g / 4 g 8 g / 16 grams of dynamic optional full scale
IIC/SPI digital output interface
16 bit data output
A programmable embedded state machine
Embedded temperature sensor
Built-in self test
An embedded fifo
10000 g high impact ability.

Features:
Material: PCB
Font size guide, trace-width diagram, and a set of AWG-sized drills
Centimeter side: 0.1cm marks
 
Package included: 
 
1 x PCB Reference Ruler v2 - 6" PCB Packaging Units for Arduino Electronic Engineers

 
Note : more than 3A current discharge products  rate is more than 3C  Ratio calculation formula : 1C rate of the battery , 2000 capacity is  equal to 2AH 1 2A maximum working current . 3C ratio battery , 2000 capacity is equal to 2AH * 3 = 6A maximum  working current . In use battery heats is ratio is not applicable to , this kind of situatic  can't use for a long time , the battery will soon be damaged
Note 1 : in accordance with the diagram wiring 0 V , 3 . 7V ( b- ) ( B1 )  ( B2 ) , 11 . 1 V , 7.4 V ( B ) don't deliberately short circuit
Note 2 : after connected line need to recharge , just can have output
Note 3 : 3 series battery , please make sure that each set of battery  voltage , if not , please separate with each set of batteries in series . Discharge test , the battery voltage drops quickly is a bad battery .
Note : don't put the good cells and in bad ! Three groups of battery  capacity / internal resistance as close as possible ! ( 2 1 good battery ,  the use effect of poor battery = the use effect of three bad battery )

Notice: The new tracking number for China Post Ordinary Small Packet Plus can be traced only befor it arrive the airport of your country,please choose China Post Air Mail if you want a full tracking info.
 
Tracking info of  China Post Ordinary Small Packet Plus can be check here : www.17track.net/en

Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger PCB Power Module Accessories For Phone DIY LED LCD Module Board

Specifications:
Working voltage: 5V/12V/24V
Size: 53*31mm
Color: blue
Material: electric components
Features:
--  Use: Adopts photoresistor induction light intensity, built-in relay, direct control of the load
-- Potentiometer sensitivity adjustment: With a potentiometer sensitivity adjustment, by adjusting the potentiometer, set the start relay valve value, when the light on the threshold, relay module pull-in, dark at the threshold, the relay release, so pick up normally open with the public is the control of the switch during the day, pick up normally closed with the public is to control the switch in the evening.
-- Easy to install: Equipped with four M3 fixed bolt hole, convenient installation
-- Application: Can do all kinds of luminance detection switch, can control all kinds of lamps, automatically open in the evening, automatically go out during the day and the car supplies control and automation equipment  and more.
Notes:
1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

Specifications:
Working voltage: 5V/12V/24V
Size: 53*31mm
Color: blue
Material: electric components
Features:
--  Use: Adopts photoresistor induction light intensity, built-in relay, direct control of the load
-- Potentiometer sensitivity adjustment: With a potentiometer sensitivity adjustment, by adjusting the potentiometer, set the start relay valve value, when the light on the threshold, relay module pull-in, dark at the threshold, the relay release, so pick up normally open with the public is the control of the switch during the day, pick up normally closed with the public is to control the switch in the evening.
-- Easy to install: Equipped with four M3 fixed bolt hole, convenient installation
-- Application: Can do all kinds of luminance detection switch, can control all kinds of lamps, automatically open in the evening, automatically go out during the day and the car supplies control and automation equipment  and more.
Notes:
1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

Specifications:
Working voltage: 5V/12V/24V
Size: 53*31mm
Color: blue
Material: electric components
Features:
--  Use: Adopts photoresistor induction light intensity, built-in relay, direct control of the load
-- Potentiometer sensitivity adjustment: With a potentiometer sensitivity adjustment, by adjusting the potentiometer, set the start relay valve value, when the light on the threshold, relay module pull-in, dark at the threshold, the relay release, so pick up normally open with the public is the control of the switch during the day, pick up normally closed with the public is to control the switch in the evening.
-- Easy to install: Equipped with four M3 fixed bolt hole, convenient installation
-- Application: Can do all kinds of luminance detection switch, can control all kinds of lamps, automatically open in the evening, automatically go out during the day and the car supplies control and automation equipment  and more.
Notes:
1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

Product parameters:
Product size: 45 * 28mm
Operating voltage: DC5V
Communication: WIFI (ESP8266 module)
Serial communication parameters: 9600,8,1,0,0
Transmission distance: the maximum transmission distance of 400m (open environment, mobile phone equipped with WIFI module)
Load: 10A/250VAC 10A/30VDC, the relay pull 100,000 times
 
Way of working:
Mobile phone equipped with WiFi module;
Mobile phone and WiFI module equipped with the same router, through the mobile phone APP to control the relay; this mode, the transmission distance depends on the signal router.
 
 
Tips:
ESP8266 module has a timeout mechanism, when the phone for some time (the default 180S) did not give instructions to the module, the module will kick off the phone, the computer can send AT CIPSTO = to modify this time (Time range 0-7200), such as: AT CIPSTO = 3600.
When the module on the WIFI module is unplugged, USB to TTL module RX, TX, GND pins were connected to the module RX, TX, GND pin, IN , IN- 5V power supply, then the module can be used as a USB Relays to use, scalability.

 1 channel relay module
 
Maximum load: AC 250V/10A, DC 30V/10A
Trigger current: 5mA
Working voltage: 5V
Module size: 50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
DC : positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be high or low level control relay
NO: normally open relay interface
COM: Common Interface Relays
NC: normally closed relay interface

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

Introduction
 
Features
 
Beam Angle: 120˚
 
Precondition : JEDEC Level 2a
 
Dimension : 5.6 x 3.0 x 0.8 mm
 
ESD withstand Voltage : up to ± 5KV [HBM]
 
MODEL   NAME : SPBWH1532S1ZVCBIB
 
 Manufacturer  :   SAMSANG
 
 Package  Model:Loaded Quantity  10000PCS  Per  Reel
 
  Forward Current      (IF ): 180mA
 
  Pulse Forward  Curren t1     (IFp): 300mA
 
  Reverse  Current    (IR):uA
 
  Reverse Voltage   (VR):0.7-1.2V  (5mA)
 
  Power Dissipation  (PD): W
 
  Operatin  Tgemperature   (Topr):      - 40   85C °
 
Storage Temperature   (Tstg):  -40  -   120 C °
 
   Soldering Temperature     (Tsld):  Reflow Soldering:260 C °
for 10secs
 
Hand Soldering:350C °
 
for 3secs
 
  Junctio  Tnemperature   (Tj ):  C °
 
  Forward  Voltage   (VF):   2.7-3.2V  (65mA)
 
  Luminous Flux    (LM):     28.5-30.5LM  (65mA)  
 
  Wavelength    (nm) :  nm      (65 mA)
 Emissions-farbe Color of  Emission :  
 
  Color Correlated Temperature    (CCT):  K
 
  CRI  :   80°
 
  Viewing angle :  120°

Introduction
 
Features
 
Beam Angle: 120˚
 
Precondition : JEDEC Level 2a
 
Dimension : 5.6 x 3.0 x 0.8 mm
 
ESD withstand Voltage : up to ± 5KV [HBM]
 
MODEL   NAME : SPBWH1532S1ZVCBIB
 
 Manufacturer  :   SAMSANG
 
 Package  Model:Loaded Quantity  10000PCS  Per  Reel
 
  Forward Current      (IF ): 180mA
 
  Pulse Forward  Curren t1     (IFp): 300mA
 
  Reverse  Current    (IR):uA
 
  Reverse Voltage   (VR):0.7-1.2V  (5mA)
 
  Power Dissipation  (PD): W
 
  Operatin  Tgemperature   (Topr):      - 40   85C °
 
Storage Temperature   (Tstg):  -40  -   120 C °
 
   Soldering Temperature     (Tsld):  Reflow Soldering:260 C °
for 10secs
 
Hand Soldering:350C °
 
for 3secs
 
  Junctio  Tnemperature   (Tj ):  C °
 
  Forward  Voltage   (VF):   2.7-3.2V  (65mA)
 
  Luminous Flux    (LM):     28.5-30.5LM  (65mA)  
 
  Wavelength    (nm) :  nm      (65 mA)
 Emissions-farbe Color of  Emission :  
 
  Color Correlated Temperature    (CCT):  K
 
  CRI  :   80°
 
  Viewing angle :  120°

Resolution:96*64
Color: 65536 Colors
Driver IC:SSD1331
Voltage:3.3V-5V
Definition of SPI Connector:
1.GND-Gound
2.VCC-Positive Voltage
3.SCL-Clock Line
4.SDA-Data Line
5.RES-Reset
6.DC-Data/Demand
7.CS-Chip Select 
  

100% brand new and high quality
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
 
Features:
Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded TCP/UDP stack - allows you to upload data to a web server.
RTC supported.
Selectable serial port.
Speaker and Headphone jacks
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40°C to 85 °C
Size:8.5x5.7x2cm(approx)
 

Self-Made Feature:
1, interface, say no more driver again.
2, Support windows 7 system.
 
PICkit 3 Features
USB (Full speed 12 Mbits/s interface to host PC)
Real-time execution
MPLAB IDE compatible (free copy included)
Built-in over-voltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally enclosed
Supports low voltage to 2.0 volts (2.0v to 6.0v range)
Diagnostic LEDs (power, busy, error)
Read/write program and data memory of microcontroller
Erase of program memory space with verification
Freeze-peripherals at breakpoint
Program up to 512K byte flash with the Programmer-to-Go
The MPLAB PICkit 3 allows debugging and programming of PIC®and dsPIC®Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).
 
 

The power supply is a kind of high-efficiency voltage automatically regulator.
Whatever is the input voltage value,the output voltage can be maintained constant.
For example,set the output to 12V, then the variation of the input voltage in the range of 5-32V,
the output voltage in the 12V invariant.
This module has a perfect protection function, and can be widely used in notebook power,
vehicle power supply, solar charge etc..
Advantages:
The input uses replaceable fuse to protect power supply and equipment;
The whole electrolysis use patch, low resistance, high frequency capacitor
,to make the ripple down to the freezing point;
Constant voltage, constant current, under voltage protection (MPPT is more suitable for solar charging)
The output has error indicating lamp,it will light when the output voltage drift too serious,
short circuit and other fault;
Inductor use iron silicon aluminum, 0.8 double winding, generate less heat.
Parameters:
Input voltage: DC5-32V;
Output voltage: DC1V-30V continuously adjustable; the default 12V shipment
Output current: 10A (MAX) ,long term within 8A
Output power: 80W, peak 130W, more than 80W please strengthen heat dissipation
Output ripple: 50mV (12V turn to 12V, 5A measured)
Short circuit protection:YES
Input reverse connection protection: No
Output prevent reverse connection protection: No
Operating temperature range: -45 ~ 85 centigrade

Specification:
Brand new and high quality.
Color: Gray.
Long service life and high reliability.
Highly reliable, compact size designed to offer users maximum simplicity.
Fast switching.
Reduced electromagnetic interference.
Output voltage: AC 24-380V.
Output current: 40A.
Input voltage: DC 3-32V.
Control Method: DC to AC.
Mounting Method: Bolts fixed.
Size:6.5cm x 4.5cm x 2.2cm - 2.56inch x 1.77inch x 0.87inch.
1PCS 24V-380V 40A 250V SSR-40 DA Solid State Relay Module 3-32V DC To AC
 
 

Free shipping B0505S-1W 5V to 5V converter DC DC power module converter 1000VDC Isolation
 
Features:
 
It is of high power density, high efficiency, high-reliability, small size and lightweight.
It can isolate unsteady single-way voltage output.
Low ripple coefficient and low static current can promote your work efficiently.
Applicable to distributed power supply system and the circuit that is powered by a small power source.Such as industrial control industry, instrumentation industry, intelligent transmitter, sensor, network communication equipment and other fields.
 
Specification:
 
Current Conversion: DC to DC
Output voltage:DC 5V
Output Current:20~200mA
Reflected Ripple Current:20mA
The Maximum Capacitive Load:220μF
Input voltage 4.5-5.5V
Rated Output Power: 1W
Color: Black
 
 

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

 
 Product Description
LED bulb Power: 10W Luminance: 900-1000LM
Current: 800-900mA Voltage: DC 9-12V(if use DC 12,Recommended Series a about 1.50 ohm resistor to use)
Integrated approach: Series 3 and 3
Color: Daylight white /warm white /red /blue /green /yellow
Size (L x W): Approx. 1.15 x 0.8 inch / 2.9 x 2 cm
Light-emitting part of the size: 11mm * 11mm
LifeSpan Time : > 50,000 hours
Application: Landscape scene / spot lighting Architectural lighting Display scene Artwork lighting general lighting Amusement park scene Aquarium lighting 10x LED bulb

10pcs Mega 2560 R3 Mega2560 REV3 ATmega2560-16AU,10pcs ATMEGA16U2-MU Board 10pcs USB Cable compatible 10set for Arduino