Egyéb hidraulika és pneumatika

Features:
UT658 USB tester is used for quality testing of electronic chargers, power banks and other charging equipment.
It is designed to improve the charging efficiency and to protect charging equipment.
It can measure voltage 3.0V~9V, and measure current 0.0A~3.0A, with measurement precision of ±1% .
Different data displayed on one screen, real-time monitoring, safe and reliable.
Smart memory of charging capacity, quick testing for power banks.
Specifications:
Brand: UNI-T
Model: UT658
Function Specifications Description
Input voltage range 3V~9V 'OL' is displayed when greater than 9V
Voltage Resolution 0.01V
Voltage monitoring accuracy ±1%
Current monitoring range 0A~3A 'OL' is displayed when greater than 3A
Current monitoring accuracy ±(1% 2) ±(1% 3) when less than 500mA
Voltage resolution 0.01A
Capacity 0~9999mAH Portable battery capacity
Capacity data storage 10 sets
Display method LCD With backlight
Sound alarm/Warning Yes When higher than 5.3V or less than 4.7V
Key Function Yes
Pollution Level 2
Operating temperature 0℃~40℃
Storage temperature -10℃~50℃
Relative humidity <75%
Size
8.3*2.5cm/3.3*1in
Weight
32g (approx.)
Note:1, There might be situation that provided data is limited depending on testing different products.
2, If current is less than 0.05, it will display 0.00.
3, It might not test accurately for equipment which has quite low power consumption, such as energy-saving designed mouse, keyboard, hard disk.
4, If the tester is connected to computer alone, it will show voltage value only.
5, The tester itself also will cause certain current loss, so the data displayed is the sum of equipment and its own.
Package Includes:
1 x USB Tester

Feature:1. Suitable for the transmission of water, gas, oil, fuel and other media
2. 304 stainless steel material, high hardness, not easy to rust, good stability
3. Precision thread, no slip wire, good airtightness, not easy to leak
4. High temperature and pressure resistant, not easy to damage.
5. Compact structure, small size, light weight and easy assembly.
Specification:
Condition: 100% Brand New
Item Type: Pipe Connector
Material: 304 Stainless Steel
Type: 3 Way
Thread: Inch Male Thread (BSPT)
Optional Size: 1/8in, 1/4in, 3/8in, 1/2in
Uses: Suitable for the transmission of water, gas, oil, fuel and other media
Package List:1 x Connector

Features:Pneumatic quick connector is mainly used for quick connection for pipe and pneumatic tools, which can achieve connection or disconnection without tool.
This quick connector can bear high pressure and not fall off.
The thread is printed special material, excellent sealing performance. This connector is made of high quality material with durable construction.
It can rotate 360 degree, which can meet any demands to assemble pipes.
The oval RingDesign make it simple to disassemble.
Specification:Fluid: Air, Vacuum
Normal Pressure Range: 0-0.9Mpa
Maximum Pressure: 1.32Mpa
Low Pressure Range: -99.9-0Kpa
Temperature: 0 to 60°C
Hole Dia.: 8mm
Size: Approx. 3.5*3cm / 1.3*1.2inch
Thread Outside Diameter: G1/4''(12.7mm)
Weight: 127g
Package Includes:10 x Pneumatic Quick Connector

Description:This air cylinder is made of high quality aluminum alloy with durable performance. The stroke is 50mm and the inner diameter is 16mm, convenient to install, easy to use.
Features:
Adopt aluminum alloy cylinder, durable for use.
The front and rear cover is threaded with the cylinder pipe.
The piston is adopted in two-way sealing structure with compact size and oil storage function.
The front cover adopts self-lubrication bearing guide, perfect lubrication and guiding performance.
Convenient to install, easy to use.
Specification:Material: aluminum alloy
Stroke: 50mm
Working medium: air
Pressure: 0.15-1MPa
Enduring pressure: 1.5MPa / 15Psi
Act type: dual act and single rod
Diameter of thread: M6
Hole diameter: /8
Size: Approx. 16*2.48cm / 6.2*0.9inch
Weight: 120g
Package Included:1 x Air Cylinder

Feature:1. Surface treated by sandblasting process, corrosion-resistant, not easy to oxidize and rust.
2. The working medium is water, oil, heating, low fluid resistance and long service life.
3. Made of high hardness brass material, durable and long-lasting.
4. Mini ball valve, light weight, simple structure, beautiful and practical.
5. Professional manufacturing, exquisite workmanship, good sealing performance, easy to install and use.
Specification:
Condition: 100% Brand New
Item Type: Ball Valve
Material: Brass
Surface: Abrasive Blasting
Thread: G1/4in
Working Medium: Water, Oil, Heating
Working Temperature: -10℃Worker Pressure: 1.6MPA
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Valve

Features:
1. Made of metal material, sturdy and durable.
2. This quick fitting doesn't fall off under high pressure, safe and reliable.
3. Quick connection, easy to install.
4. Precision threads ensures the fastness of the connection.
5. Widely used for the connection between pneumatic devices and air hose.
Specification:
Quick fitting type: 2 way quick fitting, 3 way quick fitting (Optional)
Material: plated iron
Air inlet thread: 1/4"
Weight: Approx. 176-235g / 6.2-8.3oz
Package List:
1 * Pneumatic Quick Fitting

Features:Superfine quality aftermarket Solenoid Seal Ring Repair Upgrade Kit.
Made of premium rubber material, wear-resistant, practical and durable.
More suitable for continuous use with petrol and the vehicle engine environment.
Provide ideal solution to cure the engine problems of your vehicle.
Easy to operate, fit for Vanos N40 N42 N46 N45 engines.
Specifications:Condition: Brand New
Material: Rubber
Color: Green
Package Weight: Approx.10g/0.4oz
Fitment:
for N40 N42 N46 N45 engines
for E46 316Ci Coupe, Europe
for E46 316i Touring, Europe
for E46 316i Saloon, Europe
for E46 316ti Compact, Europe
for E46 318Ci Coupe, Europe
for E46 318Ci Convertible, Europe
for E46 318i Saloon, Europe
for E46 318i Touring, Europe
for E46 318ti Compact, Europe
for E60N: E60N 520i Saloon, Europe
for E81: E81 116i 1.6 3 doors, Europe
for E81 118i 3 doors, Europe
for E81 120i 3 doors, Europe
for E82: E82 120i Coupe, Europe
for E83: E83 X3 2.0i SUV, Europe
for E83N: E83N X3 2.0i SUV, Europe
for E84: E84 X1 18i SUV, Europe
for E85: E85 Z4 2.0i Roadster, Europe
for E87: E87 116i 5 doors, Europe
for E87 118i 5 doors, Europe
for E87 120i 5 doors, Europe
for E87N: E87N 116i 1.6 5 doors, Europe
for E87N 118i 5 doors, Europe
for E87N 120i 5 doors, Europe
for E88: E88 118i Convertible, Europe
for E88 120i Convertible, Europe
for E90: E90 316i Saloon, Europe
for E90 318i Saloon, Europe
for E90 320i Saloon, Europe
for E90 320si Saloon, Europe
for E90N: E90N 316i Saloon, Europe
for E90N 318i Saloon, Europe
for E90N 320i Saloon, Europe
for E91: E91 318i Touring, Europe
for E91 320i Touring, Europe
for E91N: E91N 318i Touring, Europe
for E91N 320i Touring, Europe
for E92: E92 320i Coupe
for E92N: E92N 320i Coupe
for E93: E93 320i Convertible
for E93N: E93N 320i
Package List:4 * Seal Ring.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
Simple push in for connecting to the tube and provide secure connection, requires no sealing.
Round release on two ends facilitates pneumatic installations in confined spaces.
High pressure resistance, no tripping, can withstand greater and pressure without tripping, easy installation, long service life.
The release adopts elliptic , and the disassembly is more convenient and save labor.
Thread precoated ptfe - proof adhesive, with good sealing performance.
This product contains 30 pieces fittings, 10pcs1/4" fittings, 10pcs 5/16" fittings, 10pcs 3/8" fittings.
Specifications:
Material: PU
Fluid: air
Normal Pressure Range: 0-0.9Mpa
Maximum Pressure: 1.32Mpa
Low Pressure Range: -99.9~0Kpa
Temperature: 0 to 60°C
Fits for Tube OD: 1/4''(6mm), 5/16''(8mm), 3/8''(10mm)
Weight: 161g
Package Included:
30 x Straight Push Connector

Feature:1. Made of high quality PVC material, sturdy and durable, suitable for inflatable boat, rubber boat, support plate, etc.
2. The measurement range is 0-2 BAR or 0-30 PSI, meets most of the air pressure measurement of inflatable boats. Accurate measurements and clear hands make it easy to read pressure data.
3. The is marked with PSI and BAR units and is reliable to use. It can used with high pressure hand pumps, air pumps or air valves.
4. Check air pressure drop changes at any time to identify potential problems in the rubber boat, easy to install and operate.
5. Suitable for sports: outdoor projects, rafting, water skiing, surfing.
Specification:
Condition: 100% Brand New
Item Type: Inflatable Boat Single Barometer
Model: 30PSI
Material: PVC
Color: Black
Quantity: 1PCS
Air Chamber: 3 and Above
Weight: Approx. 85g
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Inflatable Boat Single Barometer
1 x Accessory

Feature:1. Mechanical button designed, stable structure, easy to trigger.
2. Air mechanical valve, widely used in various pneumatic systems.
3. Mushroom button air mechanical valve, unidirectional flow.
4. The mechanical valve is made of aluminum alloy, pressure proof and explosion proof.
5. thread connection form, tight connection, no leakage.
Specification:
Item Type: Mechanical Valve
Nominal Pressure: 0 ~ 1Mpa
Nominal Diameter: G1/8in
Material: Aluminum alloy
Connection Form: Thread
Working Medium: Air
Pressure Environment: 0-1.0mpa
Working Temperature: 0-60 ℃
Type: 2-way
Shape: Mini
Flow Direction: Unidirectional
Form: Diaphragm valve
Scope Of Application: Widely used in various pneumatic systems
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Mechanical Valve

Feature:1. Via manual operation, the direction is coaxial with the axle, which is easy to operate and accurate positioning.
2. The sliding column structure has good sealing performance in small size, light weight, for easy assembly and disassembly.
3. And the inner hole is processed by special technology, while the friction is small.
4. Via craft by many experts, such a valve is entitled with high performance according to strict rule.
5. With long service life, the hand reversing valve is not easy to damage, you can use for a long time.
Specification:
Item Type: Pneumatic hand reversing valve
Model: For HV-04
Working Pressure: 0-8kgf/cm²
Connector Diameter: BBSP 1/2 inch
Interface Thread Diameter: Approx. 20mm / 0.8in
Working Medium: Air
Working Temperature: -20-70 °C
Guaranteed Press-resistant: 1.0mpa
Mode of Operation: Manual control
Lubrication: No need
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x Valve Body
1 x Handle

Description:
This pressure gauge is 6cm dial plate,scale for bar measurement. With 1/4" NPT thread connection, side mounted, its measurement range is 0~6 bar. Clear number markings for easy readings.
Features:
This pressure gauge is 6cm dial plate,scale for bar measurement.
With 1/4" NPT thread connection, side mounted, its measurement range is 0~6 bar.
Clear number markings for easy readings.
Metal outer case, well protect the inner accessories, mini size, convenient to carry.
This pressure gauge is a great pressure measuring tool with stable performance.
Specification:Material: metal
Measurement: Range 0~6 bar
Connection: 1/4" NPT Thread
Diameter:6cm/2.36inch
Weight: 97g
Package includes:1 x Pressure Gauge.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Compact Size 5PCS Mechanical Valve Mini Toggle Switch for Toys for Car Models
Features:
This is a hand controlled mechanical valve of good performance and durability.
Hand movement operation type, convenient to use, 2 pin 2 position type.
The metal round knob switch is convenient to adjust.
The hand control valve has simple structure, small size, easy installation and maintenance.
Compact size, lightweight, easy to assemble and disassemble.
Specifications:
Condition: 100% Brand New
Model: 1021
Material: Plastic Iron
Weight: Approx. 117g / 4.1oz
Button Head Diameter: Approx. 12mm / 0.5in
Product Gear: ON-OFF
Rated Current: 15A
Rated Voltage: 250V
Package list:
5 * Toggle Switch

DN20 Swing Check Valve Brass One-way Check Valve for Pipe Fittings Pipe Hardware
Features:
1. Made of high quality brass, durable to use.
2. Used to prevent backflow of the media in the pipeline.
3. The check valve belongs to the automatic valve class, the opening and closing piece relies on the force of the flowing medium.
3. The check valve is only used for the one-way flow of the medium in order to prevent the media from back flowing.
4. Suitable for water, oil, steam, acidic media, etc.
Specification:
Condition: 100% Brand New
Model: DN20
Material: Brass
Weight: Approx. 177g / 6.2oz
Size: Approx. 48 * 50mm / 1.9 * 2.0in
Package List:
1 * Check Valve

Descriptions:
Hydraulic test hose is used in the hydraulic system, test the pressure of each point in the hydraulic system and as a conduit for conducting fluid media. And has good performance of oil resistance, acid and alkali resistance, high pressure resistance.
Features:
Used in the hydraulic system, test the pressure of each point in the hydraulic system and as a conduit for conducting fluid media.
It has the features of advanced structure, reliable , strong attachment, light weight and easy to use.
Lining layer is nylon, the enhancement layer is extremely strong industrial fiber, outer cladding is made from polyurethane.
This hydraulic test hose has good performance of oil resistance, acid and alkali resistance, high pressure resistance.
One end is M16*2 female, connect to coupling; the other end is BSP1/4 female, connect to Gauge.
Specifications:
Color: black
Wall thickness: 1.5 mm
Length: 2m/6FT
Temperature: - 40 ℃ to 120 ℃
Lining: nylon
Enhanced layer: super industrial fiber
Outer cladding: polyurethane
Hose =2mm, O.D.=5mm
Allowable working pressure: 64Mpa
Minimum blasting pressure:160Mpa
Minimum bending radius: 30 mm/1.18inch
Weight:105g
Package Included:
1 x Hydraulic Pressure Test Hose

Features:
Made of high quality copper material, high strength, resistant to high temperature, very durable.
1/4inch inner thread, suitable for many machines.
Fit for air only, not applicable to water or oil.
This is a one way check valve, can prevent air flowback and ensures great airtight performance.
Useful accessory for your machine, 5pcs per pack, enough for long time use.
Specification:
Material: Copper
Color: Shown as picture
Quantity: 5pcs
Fluid: Air
Port Size: 1/4"
Size: Approx. 4 x 1.6cm / 1.57 x 0.6inch
Weight: Approx. 163g
Package included:
5 x Air Check Valve

Feature:1. The product has fine thread and no burr
2. High-quality valve body adopts high-quality sealed PVC material and aluminum structure to make the overall connection more tight and firm
3. Reversible rotation of the handle is light, good hand feeling, accurate positioning of the hand guard, to avoid operation damage
4. 6-ring sealing ring, strong sealing, long-term use is not easy to leak
5. High-accuracy valve rod and sealing design ensure good breathability
Specification:
Item Type: Hand Lever Pneumatic Valve
Model: 4H210-08
Working Medium: Compressed air
Action Mode: Manual control direct acting
Number of Positions: 2-Position 5-Way
Effective Cut-off Area: 16.0mm(Cv = 0.89)
Connecting Hole Diameter: Inlet = Outlet = G1/4, Outlet=G1/8
Lubrication: Not required
Working Pressure: 0-0.8MPa
Maximum Pressure Resistance: 1.0MPa
Working Temperature: 0-60 ℃
Body Material: Aluminum alloy
Sealing Material: PVC
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Hand Push Valve

Features:
1. Small size, light weight and easy to install.
2. High quality aluminium alloy ensure the durability and stability of the product.
3. It can effectively measure the pressure of the spray and easy to operate.
4. The thread size is BSP 1/4in, easy to install and remove
5. A good air regulator for spray and pneumatic tools
Specification:
Condition: 100% Brand new
Item Type: Air Regulator
Material: Aluminium Alloy
Size: Approx. 4.3 x 1.9 x 5.8cm / 1.7 x 0.7 x 2.3in
Package List:
1 x Air Regulator

Description:
Pneumatic quick connector is a quick connector that is mainly used for air piping and pneumatic tools. It can connect or disconnect the pipe without tools.
Features:
1. Made of high quality material, sturdy and durable with long service life.
2. Easy to install without much efforts.
3. Firm installation, not fall off under high pressure.
4. The thread is printed special material, excellent sealing performance.
5. Mainly used for quick connection for pipe and pneumatic tools.
Specification:
Model: pc6-02
Material: copper plastic
Quantity: 25pcs
Application range: automation equipment
Temperature resistance: 0-60(°C)
Pressure resistance: 0-1MPa
Thread size: G1/4
Thread diameter: 12-12.5mm
Weight: Approx. 170g
Package Includes:
25 x Pneumatic Quick Connector
Note:
Please allow small deviation due to manual measurement. Thanks for your understanding.

Feature:1. With double to make sure no leakage, brass filling valve with sealing cap.
2. Filling valves are used in various parts of freezing, refrigerating and air conditioning equipment.
3. The bonnet knurled designed is adopted for easy installation and disassembly.
4. Small size, easy to carry and store, convenient to use and with good performance
5. Using high‑quality materials, strong and durable, has a long service life
Specification:
Item Type: Refrigerator Check Valve
Product Model: HS--110
Sealing Method: Valve core rubber ring
Pressure Resistance: 4.5MPa
Medium Temperature: -25~120℃
Working Pressure: 3.0MPa
Copper Tube Diameter: Approx. 6.35mm / 0.3in
Body Material: Copper/brass
Packing Method: Plug-in packaging
Usage: Welding
Adapt to Refrigerant: Conventional refrigerant
Packing Quantity: 5Pcs/set
Copper Tube Length: Approx. 90mm / 3.5in
Total Length: Approx. 120mm / 4.7in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:5 x Valve

Feature:1. Easy to install through quick mounting of male threaded connections, suitable and compact
2. Disassembly and replacement of straight pneumatic fitting is extremely convenient and fast
3. Made of high class stainless steel and brass material, durable and not easy to rust or damage
4. This practical push connect fitting can compatible with all 1.75mm PLA ABS printers
5. Advanced technology with fine workmanship bring , which will not hurt your hands in work
Specification:
Item Type: Straight pneumatic fitting
PC4-M6:
Outer Diameter: Approx. 4mm / 0.2in
Thread Specification: M6
Material: Brass
Color: Blue, gold
PC4-M10:Outer Diameter: Approx. 4mm / 0.2in
Thread Specification: M10
Material: Stainless steel
Color: Black, silver
Compatibility: Compatible with all 1.75mm PLA ABS printers
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
10 x PC4-M6 Straight Pneumatic Fitting
10 x PC4-M10 Straight Pneumatic Fitting
Note:Small printers accessories, please keep away from children.

Pneumatic quick connector is mainly used for quick connection of air piping, pneumatic tools, which can achieve pipe connecting or disconnecting without a tool requiring.
Features:
1. Easy installation by air push without sealing requiring.
2. It doesn't fall off under high pressure, safe and reliable.
3. Release with oval is more convenient to disassemble.
4. Pipe body can rotate 360 degree even if installed, which is simple and flexible.
5. High precision threads its good sealing performance.
6. Easy to install, durable for long term use.
Specification:
Material: Plastic
Normal Pressure Range: 0-0.9MPa
Maximum Pressure: 1.32MPa
Low Pressure Range: -99.9-0Kpa
Operating Temperature: 0-60℃
Fit Hose Outer Diameter: 6mm
Straight Connector Length: 34mm/1.3in
Elbow Union Connector Length: 26mm/1.02in
Y Union Connector Length: 37.4mm/1.5in
Tee Union Connector Length: 41mm/1.6in
Weight: Approx. 197g / 6.9oz
Package List:
10 x Straight Connectors
10 x Elbow Union Connecto
10 x Y Union Connector
10 x Tee Union Connector
Note:
Please allow slight error due to manual measurement. Thanks for your understanding.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Made of heat-treated iron, such pneumatic connector has high strength and durability for wide application.
2. With nickel coating resistant to rust and corrosion, such British quick connector supports practical adoptability.
3. The quick release connector used for compressor side has a built-in valve that shuts off the air when switching between tools.
4. Easy to use, all you have to do is slide the collar backwards, then insert a coupling, and then slide the collar completely to fix it in place.
5. After many inspections before leaving the factory, pneumatic adapter's quality is guaranteed, you can use it with confidence.
Specification:
Item Type: British quick connector
Quick Release Thread Type: 1/4 BSP
Shape and Length to Connector: British style.
Temperature Resistance: -20-107 (C)
Strength Voltage: 150 (MPa)
Material: Iron
Color: Silver
Packing Size: Approx. 115 x 80 x 20mm / 4.53 x 3.15 x 0.79in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
1 x External Thread Female Connector
4 x External Thread Male Connector
1 x Internal Thread Male Connector

Descriptions:
This solenoid air valve is 3 way 2 position, direct acting normally type, made of high quality brass material, sturdy body have a long lifespan, perfect for electrically driven pneumatic power control.
Features:
This solenoid air valve is made of high quality brass material, and durable in use.
This is direct acting type normally solenoid air valve, which is sensitive to change direction.
Sturdy body have a long lifespan, perfect for electrically driven pneumatic power control.
The inner valve core and spring are made of stainless steel and will not rust, no need additional lubricate.
With solenoid operated for control appropriate flow and direction, provide great performance.
This solenoid air valve is a great replacement for the broken or old one.
Specifications:
Material: brass
Working medium: air
Acting mode: direct acting
Type: normally type
Voltage(Optional): DC12V/24V
Receiver diameter: 1/8"BSP
Use pressure: 0-0.08MPa
Maximum pressure resistance: 1.0Mpa
Operating temperature range: 10 ~ 60 ℃
Use voltage range: ±10%
Protection level: IP65
Electrical connection: outlet type or terminal type
Maximum action frequency: 10 times/s
Minimum excitation time: 0.005 / S
Size: 6.6 x 3 x 2.2cm/2.60 x 1.18 x 0.87inch
Weight:136g,135g
Package Included:
1 x Solenoid Air Valve

Features:1. Widely used to connect for Bowden extruders.
2. PTFE tube diameter: 4mm.
3. PTFE parts are of good quality.
4. The PC-M6 connector is made of copper and the PC-M10 is made of stainless steel. Wear-resisting and durable.
5. Brand new and high quality.
Specification:Color: as pictures shown
PC-M6 material: copper
PC-M10 material: stainless steel
PTFE tube diameter: 4mm / 0.16in
Thread diameter: 6mm / 0.24in
Weight: approx. 96g
Package list:10 * PC4-M10 Connector
10 * PC4-M6 Connector

Feature:1. Made of high quality brass material, sturdy, having long service time.
2. Nickel plating provides a smoother, brighter and more delicate surface.
3. Horizontal pushing designs make it easy to control the flowing of water.
4. There are total 3 gear for you to control, meeting your different need.
5. Features tight sealing and precise G1/4 screw thread.
Specification:
Condition: 100% Brand New
Item Type: Drain Valve
Model: FM-PTSL
Size: Approx. 53x23mm/2.1x0.9in
Material: Brass
Thread: Female G1/4
Function: 3 gears (full open/half open/closed)
Surface Treatment: Nickel plating
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Drain Valve

Features:
1. Made of high quality material, durable and long service life.
2. Small size, fine craftsmanship, convenient to carry
3. The fluid that can be used is clean compressed air
4. This pneumatic connector can withstand greater and mote powerful pressure without tripping, easy to install
5. Can be applied to PU hoses and nylon tubes
Specification:
Condition: 100% Brand New
Material: Plastic
Maximum Working Pressure: 1.32MPA (13.5kgf/cm2)
Pressure Range: Normal Use Pressure (0-0.9MPA (0-9.2kgf/cm2))
Low Pressure Use Pressure (-99.99-0kpa (-750-0mmHg))
Environment and Fluid Temperature: 0-60℃
Package List:
10 * PU8 Pneumatic Connector
10 * PV8 Pneumatic Connector
10 * PE8 Pneumatic Connector
10 * PY8 Pneumatic Connector

HOME

Feature:1. Using G1-1/2 DN40 interface, simple installation and long service life.
2. Good tightness, suitable for most fish tanks, water tanks, pond or .
3. Adopts high-quality ABS material, durable, wear-resistant and pressure-resistant.
4. It meets strict quality control standards and is suitable for farms and households.
5. This water tower connector is well-made, corrosion-resistant, and stable in performance.
Specification:
Condition: 100% Brand New
Item Type: Water Tanks Bulkhead
Material: ABS
Thread: G1-1/2 DN40
Weight: Approx. 270g / 9.5oz
Product Size: Approx. 10x10x4cm / 3.9x3.9x1.6in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Water Tower Adapter
Note:
1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Feature:1. The hose is made of high quality PU material with excellent flexibility.
2. With 1/4in female and male joint, it's very convenient to use.
3. It can bear large pressure and is very suitable for the transmission of compressed air.
4. The hose is very soft and can be rolled up for easy carrying or storage.
5. Excellent elasticity, no fear of pipe being easily broken.
Specification:
Condition: 100% Brand New
Item Type: PU Air Hose
Material: PU
Color: Orange
Hose Length: Approx. 12m / 39.4ft
Hose External Diameter: Approx. 8mm / 0.31in
Hose Internal Diameter: Approx. 5mm / 0.2in
Connector: 1/4in quick female Connector, 1/4in quick male Connector
Working Pressure: 8KG / CmÂł
Ultimate Working Pressure: 13KG / CmÂł
Uses: Supply compressed air as a dynamic source to supply pneumatic tools.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x PU Air Hose

Features:
100% Brand new and high quality
This is a new, efficient, clean, economical, small vacuum component
Widely used in industrial automation in machinery, electronics, packaging, printing, plastics and robots
Vacuum generator is a great replacement for the broken one.
The vacuum generator is made of high quality material, with long serving life
Specifications:
Model: AZH10BS-06-06
Material: Plastic
Nozzle diameter: 1mm
Highest vacuum: -88kpa
Connector: 6 mm
Weight: 25g
Package included:
1 x Vacuum Generator
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
The medium of the switch is air with a pressure range of 0.1~1.0MPa.
The switch can work normally between -5~60℃.
The normally switch has a maximum wattage of 100VA and its insulation voltage is 1500V,more safe.
The maximum pulse quantity is 200 circle/min with a maximum service of 1,000,000 circles.
High protection level of IP54,more durable and reliable.
Specification:Item Type:Pressure Switch
Applicable Medium: Air
Operating Pressure Range: 0.1~1.0Mpa
Environment And Medium Temperature: -5~60°C
Working Form: Adjustable Pressure
Caliber: G1/4"
Working Voltage: AC220V, 48V/AC, DC
Maximum Operating Current: 500mA
Maximum Power: 100VA, 24VA
Insulation Voltage: 1500V, 500V
Maximum Number Of Pulses: 200 Circles / Min
Service Life: 1,000,000 Circles
Protection Level: IP54
Package List:1 x Pressure Switch

Features:
The pneumatic quick connector is mainly used for quick jointing air piping, pneumatic tools, it can realize the connection or disconnection of the pipe without other tools
For adjusting flew air supply to change driving for air cylinder or other operating elements
It adopts quick connection design, easy to install
Can withstand greater and pressure without tripping, easy installation, long service life.
Using elliptical release design, it is more convenient to disassemble.
Precoated adhesive, good sealing property.
Specifications:
Type: quick connector
Material: plastic
Scope of application: automation equipment
Heat resistance: 0-60 ℃
Withstand voltage: 0-1 (MPa)
Connector diameter: 6mm
Weight: 182g
Package included:
10 x Pneumatic flow valve

This two-piece ball valve is mainly used in the pipeline to control and regulate media, which is suitable for water, oil, non-corrosive liquid and non-flammable gas.
Features:
1. With simple structure, small volume and light weight, convenient for maintenance.
2. Easy operation, quick opening and closing and good sealing performance.
3. The sealing between the ball and valve is isolated from the media so that the passing medium will not cause its erosion.
4. The flow direction of the medium is not restricted by the installation direction.
5. Small fluid resistance ensures fast flow speed.
6. Widely used to control and regulate media such as water, oil, non-corrosive liquid and non-flammable gas.
Specification:
Material: 304 Stainless Steel
Operating Pressure: 1000psi (WOG)
Operating Temperature: -20 ~ 200℃
Hole Diameter: 30mm/1.2in
Package Weight: Approx. 360g/12.7oz
Package list:
1 * Ball Valve

Features:
Made of galvanized iron, sturdy and durable.
Resistant to high temperature and high pressure, safe and reliable to use.
Quick connection, easy to install.
standard 1/4" BSP Y Piece thread ensures the fastness of the connection.
Widely used for the connection between pneumatic devices and air hose.
Specification:Material: Galvanized Iron
Type: BSP Y Piece 3 Way
Air Connector Thread: 1/4"
Weight: Approx. 280g
Package List:1 * 1/4" BSP Y Piece 3 Way Connector

Features:
1.Refrigeration charging adapter r22 / r410a for 1/4" male to 1/4" famale safety adapter air conditioning charger
2.From the high-end quality design, the -loading rotation is easy to use.
3.Regardless of how the safety valve is placed, it is easy to switch operations.
4.High-end cnc machine tools, multiple parts are connected to no leakage.
5.The factory is sealed before handling, safe and reliable.
6.Choose an experienced design and create it in strict accordance with the application of the product design.
7.The movable thimble can precisely control the high and low pressure valve needles of the air conditioner.
Specification:
Packing size: 14.5*9.4*3cm
Material: Copper Aluminum
Weight: 0.202kg
Suitable for 1/4" male toSAE 1/4" Famale safety adapter air conditioning charging valve
Package list:
Air conditioning valve*2
Ferrule*2
Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. The measurable pressure range is large, the measuring range is 0 ~ ‑14psi.
2. The shell is made of high‑quality stainless steel, which is strong and durable.
3. The pressure gauge has been accurately designed with high measurement accuracy.
4. The product has a wide range of applications, such as home measurement, water gage measure, etc., applicable to many areas
5. The pressure changes to drive the pressure value corresponding to the pointer of the elastic component , and the transparent meter cover is easy to read
Specification:
Item Type: Pressure Gauge
Material: 304 stainless steel
Purpose: Test vacuum pressure
Range: 0 ~ -14psi 0 ~ -1000MPA
Outer Diameter: Approx. 63mm / 2.5in
Connector: G1/4in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Pressure Gauge

Feature:1. The whole valve is made of aluminum alloy material of good rust and corrosion resistant.
2. Easy to use and convenient to mount.
3. Very durable and has long service life,more reliable in use.
4. Wide range of working temperature,suitable for more working environmental.
5. Working pressure is 0~1.0Mpa and guaranteed pressure endurance is 1.5Mpa.
Specification:
Item Type:Hand Lever Valve
Working Medium:Air
Action Mode:Manual Direct Action
Positions Quantity:4 Way 2 Positions
Working Pressure:0~1.0Mpa(0~145psi)
Working Temperature:-20~70℃
Guaranteed Pressure Endurance:1.5Mpa(215psi)
Connector Diameter:PT1/4in
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:
1 x Valve
1 x Lever

Feature:1. Quality material makes it firm and durable, which has long service life.
2. Weld to of tank to accept the VDO fuel level sender .
3. CNC machined, each component is machined to exact tolerances.
4. Built to strict quality control standards, dependable to use.
5. Easy to install, no complicated tools required, convenient to use.
Specification:
Condition: 100% Brand New
Item Type: Fuel Tank Sender Adapter
Color: As picture shown
Inner Diameter: Approx. 1.3 /4in
Outer Diameter: Approx. 2 15/16in
Screw Pitch: 10-32
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:1 x Fuel Tank Sender Adapter

Features:
Made of high quality plastic material, these coolant hoses are durable.
Plastic flexible body, light weight and easy to install with any direction and angle.
There are total 10 pieces of hoses in this set that you may use for many projects.
Widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system.
They are great replacement for you old or broken flexible coolant hoses.
Specifications:
Material: Plastic
Thread Size: 1/8BSPT
Length: 30cm/11.8in
Diameter: 1.57cm/0.6in
Quantity: 10pcs
Weight: 346g(approx.)
Package Includes:
10 x Flexible Coolant Hoses

Description:This hose is used for test the point pressure in the hydraulic pressure system and conduct the liquid substance. Advanced construction, reliable sealing, fixed installation. Features oil resistance, acid and alkali resistance, high pressure resistance.
Features:
The length of test hose is 5m / 16.4ft, enough for using.
Suitable for measuring tube of various equipments.
A perfect hose to conduct the liquid substance.
Oil resistance, acid and alkali resistance, high pressure resistance.
Advanced construction, reliable sealing, fixed installation.
Specification:Temperature range: -40℃-120℃
Allow Work Pressure: 64MPa
Minimum burst pressure: 160MPa
Application: for measuring tube of various equipment
Hose Connector: M 1 6 *2 female
Nominal diameter: 2mm
Thickness: 1.5mm
Hose : 2mm
Hose O.D.: =5mm
Minimum bend radius: 30mm
Hose length: Approx. 5 meter / 16.4ft
Color:
Weight: 172g
Quantity: 1pc
Package List:1 x Hydraulic pressure Test Hose

Pneumatic quick connector is mainly used for quick connection of air piping, pneumatic tools, which can achieve pipe connecting or disconnecting without a tool requiring.
Features:
1. Simple installation by air push without sealing requiring.
2. It doesn't fall off under high pressure, safe and reliable.
3. Release with oval design is more convenient to disassemble.
4. Pipe body can rotate 360 degree even if installed, which is simple and flexible.
5. High threads its good sealing performance.
6. Easy to install, durable for long term use.
Specification:
Material: Plastic
Color: Blue
Quantity: 35pcs
Normal Pressure Range: 0-0.9MPa
Maximum Pressure: 1.32MPa
Low Pressure Range: -99.9-0Kpa
Operating Temperature: 0-60℃
Hole Diameter: 4mm/0.16in, 6mm/0.24in, 8mm/0.31in, 10mm/0.39in,
12mm/0.47in,14mm/0.55in, 16mm/0.63in (5pcs of each size)
Weight: Approx. 323g/11.4oz
Package List:
35 x Straight Connector
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion.
Made of high quality aluminum alloy, the pneumatic cylinder has long service life.
This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes.
It has 20mm cylinder bore and 100mm stroke, the maximum pressure is 1Mpa.
Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
Specifications:Material: Aluminum alloy
Fluid: Air
Type: Double-acting
Cylinder Bore: 20mm
Stroke: 100mm
Pipe Connection: 1/8PT
Pressure: 0.12MPA-1.0MPA
Buffering: Anti-collision pad
Size: 18.6*6.3*2.5cm/7.3*2.5*0.9in
Weight: 617g(approx.)
Package Includes:1 x Air Cylinder

Stainless Steel Water Flow Switch 0.5 (A) FS-03 Water Flow Switch 70W Oil Liquid
Feature:1. High accuracy design, the liquid flow rate is greater than 1.2L/Min
2. Can be used in water or oil without filters
3. Minimal obstruction to liquid flow in the water pipe which can improve efficiency
4. Great processing, non-fragile and long service life
5. All stainless steel structure, good sealing performance, easy to install
Specification:
Item Type: Water Flow Switch
Model: FS-04 6-Point (G3/4) double male thread proximity switch
Working Voltage: 0-48(VDC)
Rated Current: 0.5(A)
Rated Power: 70W
Working Temperature: -40 ~ 120(℃)
Applicable Medium: Water / oil
Installation: Horizontal / vertical
Material: 304 stainless steel
Flow Size: > 1.2L / Min
Thread Size: Double male thread G3/4in
Water Inlet and Outlet Diameter: φ11mm
Size: Approx. 63 x 35 x 30mm / 2.5 x 1.4 x 1.2in
The working principle of the water flow switch is that an upward lifting force lifts a magnetic valve core close to and drives a reed switch to generate a signal when the water flows. The advantage of the water flow switch is that the water pressure is low. When the magnetic inside the piston is pushed to the position of the reed switch, the reed switch generates a signal. Reed switch water flow switch has stable working performance and is widely used in various equipment. And some piston water flow switches can adjust the reed switch operating point to change the flow signal, so it is the first choice for various types of equipment.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Water Flow Switch

Features:
1. Made of high quality aluminium alloy, durable to use.
2. There is 3 position 4 way hand lever valve, three central function for your choice.
3. It is easy to reverse rotation, comfortable handle and accurate positioning.
4. The effective circulation area of this product is large.
5. Widely used in packaging, food, textile, plastic machinery, equipment and other industries.
Specification:
Condition: 100% Brand New
Model: K34R6-8 3 Position 4 Way
Material: Aluminium Alloy
Thread: /4"
Medium: Air
Weight: Approx. 262g / 9.2oz
Size: Approx. 5.5 * 5.5 * 5.8cm / 2.2 * 2.2 * 2.3in
Diameter: Approx. 1.2cm / 0.5in
Package List:
1 * Hand Lever Valve

Features:
2-position 5-way pneumatic mechanical valve.
Aluminum alloy valve body, wearable and pressure resistant, lasting to use.
lever switch makes it convenient to control the valve by hand.
Compact and lightweight structure, easy to install and use.
manufacturing, good airtightness, stable and reliable performance.
Specification:
Model: 4H310-10
Working Medium: air
Action Mode: Manual control
Operating Pressure: 0~0.8Mpa
Maximum Pressure Resistance: 1.0Mpa
Number of Position & Way: 2 Position 5 Way
Port Size: Air Inlet = Air Outlet = PT3/8, Exhaust = PT1/4
Effective Area: 30mm2 (CV = 1.67)
Operating Temperature: 0~60°C
Package List:
1 x Pneumatic Mechanical Valve

Features:
100% Brand new and high quality.
This universal pressure switch is suitable for 95-125 Psi 26Aair compressor.
This is a pressure switch, control valve with a single port connection manifold.
The switch is a universal pressure switch replacement, convenient to replace the broken one.
This is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26A contacts to provide a longer lasting switch in demanding applications.
Made of high quality material, with long mechanical life.
Specifications:
Type: pressure switch
Maximum voltage: 240V
Current: 26A
Pressure: 95-125 psi
Size: 6 * 5.6 * 9cm / 2.36 * 2.20 * 3.54inch
Weight: 392g
Package included:
1 x Pressure Switch
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Lawn mower trimmer line, durable in use, wear‑resistant, tear‑resistant and has a long service life.
2. With strong practicability and can be widely used in agriculture, garden, gardening and other industries.
3. Total length is about 60m, which can be cut into different lengths according to different usage needs.
4. This mowing rope is suitable for any type of gasoline mower, which can improve the efficiency of mowing.
5. The installation and replacement are simple, and can directly replace the old or damaged trimmer line.
Specification:
Condition: 100% Brand New
Item Type: Trimmer Line
Material: Nylon
Color: White
Weight: Approx. 505g / 17.8oz
Product Size:
Diameter: Approx. 3mm / 0.12in
Length: Approx. 60m / 196.9ft
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Trimmer Line
Note:
1.Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
Made of high quality material, anti-corrosion, durable in use.
Apply for freon, air, liquid and other non-corrosive media.
Equipped with mounting bracket and screws, easy to install.
The SPDT switch ensures reliable contact switching.
Mainly used for high and low voltage limit control of refrigeration equipment or automatic system air conditioning equipment.
Specification:Material: Stainless steel, iron plated nickel, plastic
Weight: 400g/14.1oz
Pressure regulating range (bar): 1 (Min) ~ 10 (Max)
Differential pressure adjustment range (bar): 1(Min) ~ 3 (Max)
Factory setting (bar): 5 (OFF/ON) ~ 6 (ON/OFF)
Maximum air tightness test (bar): 16.5
Power supply voltage: 24V~380V
Micro switch life: 100,000 times
Electrical parameters:When the voltage is 125VAC, the non-inductive current is 20A, the full load current is 15A, and the instantaneous current is 72A.
When the voltage is 250VAC, the non-inductive current is 10A, the full load current is 8A, and the instantaneous current is 72A.
Package List:1* Pressure Control Switch
1* Mounting bracket
4* Screw
1* Instructions

Features:
It has a soft shock absorbing effect because the self-pressure-regulation function.
It can reduce shock and noise in automated mechanical operations, enhance working efficiency.
Shell is made of high quality material, good damping, high hardness and strong heat resistance.
Greatly reduce the shock and improve the stability.
The spring can reset the piston rod fast cause the perfect movement of the check valve.
Specifications:Material: Alloy Stainless steel
Color: Black
Stroke: 30mm
Max absorbed energy: 50Nm
Energy absorb: 48000Nm/h
Effective weight: 40-800WE(KG)
Allowable : 1.0-3.5m/s
Working temperature: -10~80℃
Thread: M20
Length: Approx. 157mm / 6.18inch
Weight: Approx. 255g
Package Included:1 x Oil Pressure
Note:Please aim the impactor at the center of the shaft.
Do not remove the front to use, because remove the will lengthen the piston rod and make it hit to the bottom, this may break the bottom.
It is strictly prohibited to spray paint on the tube teeth and shaft hub, otherwise it will affect the heat dissipation effect and oil.
Do not make the piston rod rust and other foreign matter.
If there are two or more vibration absorbers are installed on the same side, Please confirm the synchronization.
For safety, do not break it up to use.