Mechanikus erőátvitel

Features:
This ball bearing is mainly made of high quality bearing steel and steel material, durable with resistance to wear and collision.
This is a rubber sealed ball bearing, with good dustproof effect.
Provides running and long service life.
With the characteristic of high stability, high reliability.
Standardization size, used for machine tool, electronic equipment, pump industry, airship, reducer, plastic machine, motor, textile machinery.
Specifications:
Model: MR115-2RS
Material: bearing steel, steel, rubber
Color: blue
Inner diameter: 5mm / 0.20in
Outer diameter: 11mm /0.43in
Thickness: 4mm / 0.16in
Weight: 39g
Package included:
25 x Rubber Sealed Ball Bearings

Features:
This ball bearing is made of high quality ceramic ZrO2 andPTFE material, features high precision, high , and wear small.
Small frictional resistance, low power consumption, high mechanical efficiency.
Resistant to corrosion and able to operate in harsh conditions.
With the characteristic of high stability, high reliability.
Standardization size, used for machinery manufacturing, equipment installation and maintenance.
Specification:
Material: PTFE, Ceramic ZrO2
Model: 6903
Inner diameter: 17mm / 0.7inch
Outside diameter: 30 mm / 1.2inch
Thickness: 7mm / 0.3inch
Weight: 15g/0.5oz
Package list:
1 x ZrO2 Ball Bearing

Full ceramic bearing with diamagnetic electrically insulating, wear resistance and corrosion resistance, not self lubricating, high temperature resistance, cold and other characteristics, can be used in extremely harsh environment and special conditions.
Features:
This ball bearing is made of high quality ceramic ZrO2 and PTFE material, features high precision, high , and wear small.
Small frictional resistance, low power consumption, high mechanical efficiency.
Its zirconium oxide races offer resistance and durability to high temperatures and corrosion.
With the characteristic of high stability, high reliability.
Standardization size, used for machinery manufacturing, equipment installation and maintenance.
Specification:Material: PTFE, Ceramic ZrO2
Model: 6001
Sealed dustproof form: 2RS
Inner diameter: 12mm / 0.5inch
Outside diameter: 28mm / 1.1inch
Thickness: 8mm / 0.3inch
Color: White
Rolling column number: Single
Raceway type: Deep raceway
Weight: Approx. 20g/0.7oz
Package List:1 x ZrO2 Ball Bearing

Features:
This ball bearing is made of high quality ceramic ZrO2 andPTFE material, features high precision, high , and wear small.
Small frictional resistance, low power consumption, high mechanical efficiency.
Resistant to corrosion and able to operate in harsh conditions.
With the characteristic of high stability, high reliability.
Standardization size, used for machinery manufacturing, equipment installation and maintenance.
Specification:
Material: PTFE, Ceramic ZrO2
Model: 6202
Inner diameter: 15mm / 0.6inch
Outside diameter: 35 mm / 1.38inch
Thickness: 11mm / 0.4inch
Weight: 38g/1.3oz
Package list:
1x ZrO2 Ball Bearing

Feature:1. Superior aluminum alloy material, lightweight, sturdy, corrosion resistant and long durability.
2. Suitable for shafting transmission of various mechanical devices, such as water pumps, fans, compressors, etc.
3. It can accurately control shaft rotation, high precision control can be performed.
4. Simple structure, easy to install and disassemble, very conveneint for using.
5. Built to meet standard specification, strictly follow factory quality control.
Specification:
Condition: 100% Brand New
Item Type: Shaft Coupler
Material: Aluminum Alloy
Color: As picture shown
Model: GS-44*34.5-14*14
Outer Diameter: Approx. 44mm/1.7in
Length: Approx. 34.5mm/1.4in
Inner Diameter: Approx. 14mm/0.6in
Application: Widely used in shafting transmission of various mechanical devices, such as water pumps (especially high-power, chemical pumps), fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, High-speed, high-power mechanical transmission systems for aviation (helicopters), ship high-speed power transmission systems, steam turbines, piston-type power mechanical transmission systems, tracked vehicles, and gensets have been applied to high-speed transmission shaft systems after dynamic balancing.
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Shaft Coupler

Professional 300pcs 12 Sizes O- Assortment Set Gasket Universal Rubber O Kit New
Features:
Made of high quality rubber material, these O-rings are durable and has longer service life.
They have good abrasion resistance, elasticity, tensile strength and elongation.
There are many different sizes of O-rings in this set that can meet your different need.
Total 300 pieces so you do not have to worry about running out of O-rings for quite a while.
They can be widely used for sealing for valves, , pumps, electrical equipment, bearings, etc.
Specification:
Material: Rubber
Color:
Normal Operating Temperature Range: -20℃~100℃
Inner Diameter*Thickness/Quantity:
9.19*2.78mm/25pcs
9.92*2.62mm/25pcs
10.78*2.62mm/25pcs
11.91*2.62mm/25pcs
12.37*2.62mm/25pcs
13.1*2.62mm/25pcs
13.95*2.62mm/25pcs
15.08*2.62mm/25pcs
15.54*2.62mm/25pcs
15.88*2.62mm/25pcs
17.13*2.62mm/25pcs
17.88*2.62mm/25pcs
Weight: 190g / 6.7oz (approx.)
Package list:
1 box * O-rings

Feature:1. Extruder back support plate, suitable for series ‑10S / 10 printer.
2. Compact designs, strong and durable, made of quality aluminum alloy plastic material.
3. Easy to use, easy to install, a perfect extruder back support plate accessory.
4. With 3 pulleys on the plate, for perfect working with the printer.
5. Wonderful replacement for the old or broken one, directly fitment.
Specification:
Condition: 100% Brand New
Item Type: Extruder Back Support Plate
Material: Aluminum alloy plastic
Color: Black
Purpose: printing
Fitment: Fit for Series ‑10S / 10 Printer
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Extruder Back Support Plate

Feature:1. With small tooth space and arc tooth , it is suitable for linear drive. And the synchronous drive belt is made of rubber.
2. Working as an extension of the HTD system, the 2GT system is with greater load carrying capacity.
3. As for its temperature range, it is -34°C to 85°C or -30°F to 185°F, easy to use.
4. Made by by many experts's precision craft, the synchronous belt is entitled with high performance.
5. With its pratical adoptability, this timing belt can keep its high performance for a long time.
Specification:
Item Type: Synchronous belt
GT Material: Rubber
Color: Black
Model: GT2-6-610MM
Temperature Range: -34°C to 85°C (-30°F to 185°F)
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:5 x Timing Belt

Features:
This miniature bearing is made of high quality zirconium dioxide ceramic for low noise and long service life.
Ceramic bearing is impervious to corrosion and rarely require lubrication.
Bearing has a 25mm inner diameter, a 37mm outer diameter and a 7mm thickness.
It is great for 25mm shaft/rod projects such as mechanical equipment,electrical instrument, toy, door and window.
The bearing is used in a wide variety of applications including, electric motors, home appliances, toys and much more.
Specification:
Material: Zirconium dioxide ceramic
Model: 6805
Inner Diameter: 25mm / 1in
Outer Diameter: 37mm / 1.5in
Thickness: 7mm / 0.3in
Quantity: 1pc
Weight: 22g / 0.8oz (approx.)
Package list:
1 * Bearing

Shaft Coupler Stable Aluminum Alloy Shaft Coupling for Water Pumps Compressors
Features:
1. 100% brand new and high quality.
2. Excellent load capacity, long service life, it is safe and reliable.
3. Simple structure and it is convenient to maintain and inspect.
4. Stable work with good vibration damping, cushioning and electrical insulation.
5. Widely used for shafting transmission of various mechanical devices, such as water pumps, fans, compressors and hydraulic machinery, etc.
Specification:
Condition: 100% Brand New
Model: D40 L50
Material: Aluminum Alloy
Weight: Approx. 128g / 4.5oz
Outer Diameter: Approx. 40mm / 1.6in
Length: Approx. 55mm / 2.2in
Inner Hole Diameter: Approx. 14 * 14mm / 0.6 * 0.6in
Package List:
1 * Coupling Coupler

Features: These bearings are made of high quality steel for low noise and long service life.
They are double rubber sealed to avoid contaminants entering and save lubricant.
Bearings have a 10mm inner diameter, a 30mm outer diameter, and a 9mm thickness.
These are great for 10mm shaft/rod projects such as mechanical equipment,electrical instruments, toys.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specifications:
Type: 6200-2RS
Material: Steel
: Double rubber
Inner Diameter: 10mm/0.4in
Outer Diameter: 30mm/1.2in
Thickness: 9mm/0.4in
Quantity: 10pcs
Weight: 315g(approx.)
Package Includes:
10 x Bearings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features:
This is a great electric motor gearbox used for children's cars.
The middle gear is made of metal which is more sturdy and durable.
It will make quite low noise and more wear-resistant.
There are 4 types for different voltage and speed that you can choose as need.
It will be a great replacement part for your broken or old ones.
Specifications:Type(Optional): 6V 18000RPM, 12V 12000RPM, 12V 16000RPM, 12V 20000RPM,
Total length: Approx. 16.5cm / 6.5inch
Hole Diameter: 1cm / 0.39in
Quantity: 1
Weight: approx. 270-289g
Package Included:1 x Electric Motor Gearbox

Features:
This is a great electric motor gearbox used for children's cars.
The middle gear is made of metal which is more sturdy and durable.
It will make quite low noise and more wear-resistant.
There are 4 types for different voltage and speed that you can choose as need.
It will be a great replacement part for your broken or old ones.
Specifications:Type(Optional): 6V 18000RPM, 12V 12000RPM, 12V 16000RPM, 12V 20000RPM,
Total length: Approx. 16.5cm / 6.5inch
Hole Diameter: 1cm / 0.39in
Quantity: 1
Weight: approx. 270-289g
Package Included:1 x Electric Motor Gearbox

Sturdy High Speed Transmission Single Diaphragm Shaft Coupler Shaft Systems
Feature:1. Single diaphragm shaft coupler's whole body is made of aluminum alloy, light and sturdy.
2. Aluminum alloy shaft coupler can be widely used in shafting transmission of various mechanical equipments.
3. This shaft coupler is can be used for water pumps, especially high‑power, chemical pumps, fans, compressors, water pressure machinery, petroleum machinery, printing machinery, textile machinery and chemical machinery.
4. Moreover, shaft coupler can also be used for mining machinery, metallurgical machinery, aviation (helicopter), ship high‑speed power transmission system , steam turbines, piston‑type power mechanical transmission systems, tracked vehicles, and generator set high‑speed, high‑power mechanical transmission systems.
5. Via dynamic balancing, such kind of shaft coupler has been widely used in high‑speed transmission shafting, long service life.
Specification:
Item Type: Shaft coupler
Material: Aluminum alloy
Model: GS-50 x 45-12 x 14
Outer Diameter: Approx. 50mm / 2in
Length: Approx. 45mm / 1.8in
Inner Diameter (1): Approx. 12mm / 0.5in
Inner Diameter (2): Approx. 14mm / 0.6in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Shaft Coupler

Features:
360° contact angle position sensor,standard serial peripheral interface.
Pulse width modulation output (PWM).Simple programmable 0 position via serial peripheral interface.
No programming required,14-bit full-scale resolution.
0.05° angular accuracy after system linearization.
Daisy chaining function,air interval resistance.
Specification:
Item Type:Magnetic Encoder
Field input range: 30MT - over 70mT
Temperature range : 40 ° C to 150 ° C
Voltage:3.3V/5V
Package List:1 x Module
1 x 3 Pin Connection Cable

Features:
This ball bearing is made of quality steel, high strength, anti-rust, durable.
Fine machining ensures surface and precision V , it can works smoothly and and silently with better load capacity and less abrasion.
Resistant to high temperature while working, won't deform and ensures long time use.
Sealed can prevent dust from getting in, which can lengthen the service life of the bearing.
Suitable for various machines and equipment, easy to install and good to use.
Specification:Material: Steel
Color: Shown as picture
Inner Diameter: Approx. 20mm / 0.79inch
Outer Diameter: Approx. 57mm / 2.24inch
Thickness: Approx. 22mm / 0.86inch
Weight: Approx. 251g
Package List:1 x Ball Bearing

Linear Unit Low Friction Slider for Transmission Device Construction Machinery
Feature:1. oxidation treatment, beautiful and corrosion resistance.
2. High density aluminum alloy structure makes the slide block strong load bearing.
3. Low friction makes it move smoothly, reducing abrasion and saving energy.
4. manufacturing, standard size, stable and reliable.
5. Suitable for high speed mute high equipment, construction machinery, transmission device.
Specification:
Item Type: Linear Motion Ball Bearing Slide Block
Model: SC20UU
Material: Aluminum Alloy
Length: 54mm / 2.13in
Width: 50mm / 1.97in
Height: 40mm / 1.57in
Inner Diameter: 20mm / 0.79in
Lubricant: Oil Lubrication
Lubrication Method: Drip Lubrication
.w-e-text table td,.w-e-text table th,.wang-edit-text table td, .wang-edit-text table th{border: .5pt solid #000;};.w-e-text table,.wang-edit-text table{border: 1px solid #000 !important;}
Package List:2 x Linear Motion Ball Bearing Slide Block

Rugged Coupler Shaft Sleeve Parallel Shaft Coupling Compressors for Water Pump
Feature:1. The whole body is made of premium aluminum alloy material, light and strong, durable and sturdy, not easy to wear.
2. Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery.
3. Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system.
4. Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common.
5. Quality assurance, easy and convenient to use, having long service life.
Specification:
Condition: 100% Brand New
Item Type: Coupling
Material: Aluminum Alloy
Model: GL‑50 x 63‑12 x 12
Outer Diameter: Approx. 50mm / 2.0in
Length: Approx. 63mm / 2.5in
Inner Diameter: Approx. 12mm / 0.5in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Coupling

Features:
1. 100% brand new and high quality
2. Made of bearing steel material, durable to use.
3. Simple structure with stable performance, easy to use
4. Low frictional resistance and high speed
5. Can be used in gearboxes, instrumentation, motors, household appliances, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery, construction machinery, roller skates, yo-yo, etc.
Specification:
Condition: 100% Brand New
Model: 6301-ZZ
Cage Materials: Steel Plate
Bearing Material: Bearing Steel
Use Characteristics: High Speed
Using: General
Number of Rolling Body Columns: Single Column
Raceway Type: Deep Raceway
Rolling Body Type: Ball
Angle: 15 Degrees
Sealing Cap: Double-Side
Rolling Body: Steel Ball
Inner Diameter: Approx. 12mm / 0.5in
Outer Diameter: Approx. 37mm / 1.5in
Thickness: Approx. 12mm / 0.5in
Package List:
10Pcs Deep Ball Bearings

Features:1. Made of rubber material, very flexible, durable and practical.
2. 10mm width timing synchronous belt for printer.
3. Low elongation, low noise, high wear resistance and good crack resistance.
4. Excellent process with great quality, great accessory for printer.
5. Multi-purpose, also suitable for conveyor, mining equipment, automobile, food machinery, dishwasher and so on.
Specification:Condition:100% Brand New
Material: Rubber
Color: As Pictures Shown
Width: 10mm
Length: 10m / 32.8ft, 5m / 16.4ft, / 9.8ft, 2m / 6.6ft, 1m / 3.3ft(Optional)
Weight: About 15-146g
Package list:
1 * 2GT 10mm Width Timing Belt
Precautions:1. Forbidden to twists and turns, to avoid damage to the skeleton material, affects the of the belt. Do not scratch the belt, to avoid early belt damage.
2. Avoid contact with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid).
3. Avoid long-term contact with oil and water.
4. When replacing the timing belt, the belt tension must be reduced to a minimum before it can be removed.
Note:1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Track Synchronous Wheel Great Workmanship Track Wheel Industry Robot For Robot
Feature:1. Provide support for tracks to keep track aligned and rolling during transmission
2. Made of metal material, durable and sturdy
3. Including 2pcs synchronous wheels to meet your needs
4. Great workmanship, perfect replacement for the old one
5. High quality and great processing, good accessories for industrial robot
Specification:
Item Type: Synchronous Wheel
Diameter: Approx. 62.4mm / 2.5in
Thickness: Approx. 29mm / 1.1in
Inner Diameter: 8mm / 0.3in
Quantity: 2Pcs
Material: Metal
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:2 x Synchronous Wheel

Description:ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry. Single 0.5 /0.8 /1mm thick sheet, ultem 1000 grade, installs quickly on of existing flat build platforms.
Features:
ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
Remove film from both sides before using: The protective film guards against scratches during shipping and handling.
Reuse for multiple prints, just wipe down with isopropyl between prints for best results; Sheet can be asily cut down to desired size by scoring with a utility knife.
Single 0.5/ 0.8 /1mm thick sheet, ultem 1000 grade, installs quickly on of existing flat build platforms.
Works especially well for printers.
How to use:There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. The second method, get 468MP Transfer Tape and use it to stick the PEI to the print bed.
Once the PEI sheet is attached, re-level your print bed and you are to go!
It helps to wipe the surface down with isopropyl , methyl , or soap in between prints. This will the PEI is , and help adhesion. Light sanding with 2000 grit paper will also give the PEI sheet more life.
Specification:Condiiton: 100% Brand New
Size: 300mm x 300mm x (0.5/0.8 /1mm) / 11.81inch x 11.81 inch x (0.02 x 0.03 x 0.04 in) (appr.)
(Thickness depends on your order)
Package Included:1 x PEI Sheet
1 x Adhesive Tape (300 x 300mm)
Notice:Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.

Features:1. Made of rubber material, very flexible, durable and practical.
2. 10mm width timing synchronous belt for 3D printer.
3. Low elongation, low noise, high wear resistance and good crack resistance.
4. Excellent process with great quality, great accessory for 3D printer.
5. Multi-purpose, also suitable for conveyor, mining equipment, automobile, food machinery, dishwasher and so on.
Specification:Condition:100% Brand New
Material: Rubber
Color: As Pictures Shown
Width: 10mm
Length: 10m / 32.8ft, 5m / 16.4ft, 3m / 9.8ft, 2m / 6.6ft, 1m / 3.3ft(Optional)
Weight: About 15-146g
Package list:
1 * 2GT 10mm Width Timing Belt
Precautions:1. Forbidden to twists and turns, to avoid damage to the skeleton material, affects the intensity of the belt. Do not scratch the belt, to avoid early belt damage.
2. Avoid contact with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid).
3. Avoid long-term contact with oil and water.
4. When replacing the timing belt, the belt tension must be reduced to a minimum before it can be removed.
Note:1. Please allow 0~1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features:
Made of high quality rubber material, these O-rings are durable and has longer service life.
They are wearable, corrosion resistant and high temperature resistant.
There are 32 different sizes of O-rings in this set that can meet your different need.
Total 419 pieces so you do not have to worry about running out of O-rings for quite a while.
They can be widely used for sealing for valves, , pumps, electrical equipment, bearings, etc.
Specifications:
Material: Rubber
Type*Qty*Inner Diameter*Section Thickness:
R-01*20pcs*3mm*1.5mm
R-02*20pcs*4.4mm*2mm
R-03*18pcs*5mm*2mm
R-04*23pcs*7mm*1.5mm
R-05*23pcs*10mm*1.5mm
R-06*23pcs*13mm*1.5mm
R-07*14pcs*10mm*2.5mm
R-08*13pcs*11mm*2.5mm
R-09*14pcs*13mm*2.5mm
R-10*13pcs*14mm*2.5mm
R-11*14pcs*16mm*2.5mm
R-12*14pcs*18mm*2.5mm
R-13*13pcs*19mm*2.5mm
R-14*14pcs*21mm*2.5mm
R-15*13pcs*22mm*2.5mm
R-16*10pcs*18mm*3.5mm
R-17*10pcs*20mm*3.5mm
R-18*10pcs*22mm*3.5mm
R-19*10pcs*23.5mm*3.5mm
R-20*10pcs*25mm*3.5mm
R-21*10pcs*26.5mm*3.5mm
R-22*10pcs*28mm*3.5mm
R-23*10pcs*30mm*3.5mm
R-24*10pcs*31mm*3.5mm
R-25*10pcs*33mm*3.5mm
R-26*10pcs*34.5mm*3.5mm
R-27*10pcs*36mm*3.5mm
R-28*10pcs*38mm*3.5mm
R-29*10pcs*41mm*3.5mm
R-30*10pcs*44mm*3.5mm
R-31*10pcs*47mm*3.5mm
R-32*10pcs*50mm*3.5mm
Package Includes:
1 box * O-rings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Features: These bearings are made of high quality steel for low noise and long service life.
They are rubber sealed to avoid contaminants entering and save lubricant.
Bearings have a 20mm inner diameter, a 42mm outer diameter, and a 12mm thickness.
These are great for small hobby 20mm shaft/rod projects.
There comes total 10 pieces miniature bearings which you may use for many different projects.
Specification:
Model: 6004-2RS1
Material: Bearing steel
Type: Deep-groove high-speed
Rolling : Single row
Inner Diameter: 20mm / 0.8in
Outer Diameter: 42mm / 1.7in
Thickness: 12mm / 0.5in
Quantity: 10pcs
Weight: 339g / 12oz(approx.)
Package list:
10 * Bearings
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Feature:1. Surface oxidation treatment, beautiful and corrosion resistance.
2. High density aluminum alloy structure makes the slide block strong load bearing.
3. High density aluminum alloy structure makes the slide block strong load bearing. Low friction and movement makes it save energy.
4. Easy to install, high precision, fast .
5. Suitable for high mute high precision equipment, construction machinery, transmission device.
Specification:
Item Type: Linear Motion Ball Bearing Slide Block
Model: SC25UU
Material: Aluminum Alloy
Length: 76mm / 2.99in
Width: 67mm / 2.64in
Height: 52mm / 2.05in
Inner Diameter: 25mm / 0.98in
Lubricant: Oil Lubrication
Lubrication Method: Drip Lubrication
Package List:1 x Linear Motion Ball Bearing Slide Block

Shaft Coupling GL‑56x64‑14x14 Double Diaphragm Stepper Motor Accessories Useful
Feature:1. The whole body is made of aluminum alloy, light and strong, durable and has long service life.
2. Widely used in shafting transmission of various mechanical devices, such as water pumps, fans, compressors, hydraulic machinery, and high‑speed transmission shaftings after dynamic balancing.
3. Small and light in weight, easy to carry and install, can be installed without other complicated steps, bringing you more convenience.
4. treatment also improve the service life of coupling, and makes it more effective.
5. Great workmanship, perfect replacement for the old or damaged one.
Specification:
Condition: 100% Brand New
Item Type: Shaft Coupling
Material: Aluminium Alloy
Color: As the Picture Shown
Model: GL-56x64-14x14
Outer Diameter: Approx. 56mm/2.2in
Length: Approx. 64mm/2.5in
Inner Diameter: Approx. 14mm/0.6in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Shaft Coupling

Features:
1. -plated surface, beautiful and corrosion resistance.
2. Made of aluminum alloy, bearing capacity.
3. High hardness, low noise and rustproof.
4. Prevent dust from entering to extend the service life.
5. Precision roller, no need to lubricate.
6. Fit for silent, high-speed and precise equipment.
Specifications:
Model: SBR16UU
Material: Aluminum alloy
Quantity: 4pcs
Shaft Diameter: 16mm/0.63in
Size(L*W*H): 4.5*4.5*2cm/1.77*1.77*0.79in
Weight: Approx. 573g
Package Includes:
4 x Open Linear Bearing Slide
Note:
Please allow 1-3mm error due to the manual measurement. Thanks for your understanding.

Features:
Made of high quality material, these wheels are durable and sturdy.
Wheels have good physical, mechanical and chemical properties, especially have great wear-resistance.
The bearings in these wheel are 625, with a 5mm inner diameter.
There are total 20 pieces of wheels in one set, which you may use for many projects.
They are normally used for 3D printers, CNC machines and many other machines.
Specifications:
Main Material:
Shape: V
Bearing Type: 625
Inner Diameter: 5mm
Quantity: 20pcs
Weight: 253g(approx.)
Package Includes:
20 x Wheels
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Open Bearing Slide Slide Block SBR25LUU for Precise Equipment Drip Lubrication
Features:Made of aluminum alloy, high hardness, stronger bearing capacity.
Surface oxidation treatment, beautiful and corrosion resistance.
Prevent dust from entering to extend the service life.
Precision roller, low noise, superior performance.
Fit for silent, high-speed and precise equipment.
Specification:Material: Aluminum alloy
Model: SBR25LUU
Size(L x W x H): Approx.130 x 60 x 47mm/5.12 x 2.36 x 1.85inch
Inner Diameter: Approx. 25mm/1.0inch
Purpose: transmission device
Lubricant: oil lubrication
Lubrication Method: drip lubrication
Package Weight: 920g/32.5oz
Package list:1 x Linear Bearing Slide .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Wear Resistant Ball Bearing Printers Bearing Compact Size Printing For Printer
Feature:1. Wear and heat resistant 623ZZ bearings, used in some printer extruders, used to attach filaments to drive gears.
2. Compact and light, very easy to install on the printer, convenient to use.
3. It is widely used in printer and is an important accessory of printer.
4. Easy and convenient for installation and disassemble, reliable and durable to use.
5. Wonderful replacement for the old or broken one, directly fitment.
Specification:
Condition: 100% Brand New
Item Type: Printers Ball Bearing
Material: Bearing steel
Model: for Prusa I3 MMU2 Bearing kit
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:
5 x Bearing
10 x Accessory
5 x Black Screw

Features:
Upgraded hot bed plate, which improves the heat conduction and heat-resistance performance.
Lighter, thinner, smaller than other commonplace products.
Double-sided, no wiring on the other side, single pad. Make sure that heating is uniform on the heating area.
Easy to install and use. Wiring, whether positive or negative, random wiring.
Suitable for 3D printer / MK2B.
Specification:Material: Metal
Color: White, double-sided black oil
Process: Double-sided
Model: MK2A
Heating Area: 300*300mm/11.8*11.8in
Resistance: 1.0-1.2ohm(12V), 3.0-4.5ohm(24V)
Size: approx. 328*328*3mm / 12.9*12.9*0.1in
Package weight: approx. 1132g
Package List:1 x Hot Bed Plate
Note:1. Relatively the latest version of Mk2a is the main upgraded version of the 12V 24V dual power supply. The pads can be soldered directly over the 100K 1206 NTC thermistor patch.
2. 12V connection: One cable connects 1, 2 and 3, and the other line is connected at the same time.

Features:
Made of bearing steel and cast iron shell, high hardness and durable.
Pillow block bearing is a kind of bearing unit which combines rolling bearing and bearing block, which has good versatility and interchangeability.
Two-bolt housing with ball bearing insert for -to-mount installation.
Stable and reliable performance.
Widely used in various of machinery.
Specification:Condition: 100% brand new
Material: Bearing Steel (Bearing), Cast Iron Foundry (Shaft Shell)
Weight: 1853g/65.4oz
Block bearing : UCP206
Outer diameter: 62mm/2.4inch
Inside diameter: 30mm/1.2inch
Package List:2* Pillow Bearing

Shaft Coupling Oupler Shaft Sleeve Durable Double Diaphragm Torsion GL‑82 X
Feature:1. The whole body is made of premium aluminum alloy material, light and strong, durable and sturdy, not easy to wear.
2. Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery.
3. Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system.
4. Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common.
5. Quality assurance, easy and convenient to use, having long service life.
Specification:
Condition: 100% Brand New
Item Type: Coupling
Material: Aluminum Alloy
Model: GL‑82 x 98‑20 x 20
Outer Diameter: Approx. 82mm / 3.2in
Length: Approx. 98mm / 3.9in
Inner Diameter: Approx. 20mm / 0.8in
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:1 x Coupling

Feature:1. Including 0-25mm, 25-50mm, 50-75mm micrometers, and equipped with calibration standard measuring rod and wrench
2. Thickened bearing steel measuring , wear-resistant and long service life
3. Exquisite workmanship, clear calibration, and accurate data reading
4. Built-in force limiter on the spindle of the measuring tool to accurate repeat readings
5. 0 setting, rotating threaded socket set to 0
6. Complete specifications, with a storage box, easy to carry
Specification:
Item Type: Micrometer
Material: Bearing steel
Specification: 0-25mm, 25-50mm, 50-75mm
Calibration Rod Specifications: 25mm, 50mm
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Package List:3 x Micrometer
2 x Measuring Rod
1 x Wrench

Stepper Motor Stepper Motor Driver 350KHZ Electricity for Construction Machinery
Features:
1. A new generation of 32-bit control technology, high cost performance, good stability, excellent noise and vibration performance
2. With 16-speed equal-angle constant subdivision, up to 256 subdivisions
3. The current control is smooth and precise, and the motor heat is small.
4. The highest impulse response frequency can 350KHZ
5. When the step pulse stops for more than 200ms. Motor current is halved
6. Optocoupler isolated differential signal input, strong anti-interference ability
7. Excellent smoothness in low frequency subdivision
8. The effective value of the drive current is adjustable below 6A.
9. It has fault protection functions such as overvoltage, undervoltage and overcurrent protection.
10. Mainly used in engraving machines, equipment, labeling machines, electronic equipment, advertising equipment, packaging equipment
Specification:
Condition: 100% Brand New
Item Type: Stepper Motor Driver
Voltage Input Range: AC18-80V
Maximum Impulse Response Frequency :350KHZ
Package List:
1 x Stepper Motor Driver

description
100% new high quality
Model: 608ZZ bearing steel Z1
Color: as shown
Raceway type: deep groove raceway
Size: 8*22*7mm
Use characteristics: high speed
Rolling body type: ball
Uses: skateboard, motor, etc.
6

description
100% new high quality
Model: 608ZZ bearing steel Z1
Color: as shown
Raceway type: deep groove raceway
Size: 8*22*7mm
Use characteristics: high speed
Rolling body type: ball
Uses: skateboard, motor, etc.
6

description
100% new high quality
Model: 608ZZ bearing steel Z1
Color: as shown
Raceway type: deep groove raceway
Size: 8*22*7mm
Use characteristics: high speed
Rolling body type: ball
Uses: skateboard, motor, etc.
6

Description:
Descriptions:Condition: 100% Brand New
Color: As shown
Material:alloy steel ,surface zinc plating
Size: M5/M8/M10
Ball: 52100 Bearing Steel
Heat Treated
Hard Chrome Plated
Precision Ground
Body: Carbon Steel
Corrosion Resistant
Protective Coated
Race: Bronze Lined
Features:Metal to Metal Support for Heavy Shock Loads
No Maintenance Required
Durable,protective coated for corrosion resistance.
Inserts are in two half bronze rings
Inner ball ring ,bearing steel ,polish ,hard- chromed plated
Right hand thread
Fitment:Fit for Budget Motorsport, Marine and Industrial Applications
Package Included:1x Right Hand Female Bronze liner Rod End
Preview:

Description:
Descriptions:Condition: 100% Brand New
Color: As shown
Material:alloy steel ,surface zinc plating
Size: M5/M8/M10
Ball: 52100 Bearing Steel
Heat Treated
Hard Chrome Plated
Precision Ground
Body: Carbon Steel
Corrosion Resistant
Protective Coated
Race: Bronze Lined
Features:Metal to Metal Support for Heavy Shock Loads
No Maintenance Required
Durable,protective coated for corrosion resistance.
Inserts are in two half bronze rings
Inner ball ring ,bearing steel ,polish ,hard- chromed plated
Right hand thread
Fitment:Fit for Budget Motorsport, Marine and Industrial Applications
Package Included:1x Right Hand Female Bronze liner Rod End
Preview:

Description:
Descriptions:Condition: 100% Brand New
Color: As shown
Material:alloy steel ,surface zinc plating
Size: M5/M8/M10
Ball: 52100 Bearing Steel
Heat Treated
Hard Chrome Plated
Precision Ground
Body: Carbon Steel
Corrosion Resistant
Protective Coated
Race: Bronze Lined
Features:Metal to Metal Support for Heavy Shock Loads
No Maintenance Required
Durable,protective coated for corrosion resistance.
Inserts are in two half bronze rings
Inner ball ring ,bearing steel ,polish ,hard- chromed plated
Right hand thread
Fitment:Fit for Budget Motorsport, Marine and Industrial Applications
Package Included:1x Right Hand Female Bronze liner Rod End
Preview:

Description:681 XZZ ABEC-5 Ball Bearing, this is a popular size of any application that uses this size 1.5MM*4MM*2MM. Bearing is made of Chrome Steel, also bearings are Oil lubricated to be smooth.
Item: 681 XZZ ABEC-5 Ball Bearing EMQ Z3V3
Type: Deep groove ball bearing
Material: Chrome Steel
Lubrication: Grease
Closures: 2 SHIELD, can be removed and re-installed again
Dimensions: 1.5mm x 4mm x 2mm/Metric
ID (inner diameter)/Bore: 1.5mm
OD (outer diameter): 4mm
Width/Height/thickness: 2mm
Size:1.5 x 4 x 2 mm
Quantity: 10 PCS Bearings
SPU:CHB8216
Preview:

Description:Product Name : Thrust Ball Bearing
Model : 51104
Inner Diameter : 20mm / 0.79"
Outer Diameter : 35mm / 1.38"
Total Thickness : 10mm / 0.39"
Color : Silver Tone
Materal : Carbon Steel
Weight : 78g
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is /-1-3 cm.
Package Content :
2 x Thrust Ball Bearing
SPU:CHB6598
Preview:

Pump size: 90mm * 40mm * 35mm
Outlet diameter: inner diameter 6 mm, outer diameter 9 mm
Working voltage: DC6-12V (recommended 9V1A 12V1A)
Working current: 0.5-0.7A
Flow: 1.5-2L / Min (left and right)
Maximum suction: 2 meters
Head: up to 3 meters
Life: up to 2500H
Water temperature: up to 80
When the voltage is 6V: the power is 6W / H
Note: The silicone sleeve is fixed on the back of the water pump. Do not cover the heat dissipation hole of the motor. Move it back a little to avoid affecting the heat dissipation and service life!

No Teeth new GT2 Timing Pulley Bearing Black For 6mm Belt Reprap 3D Printer hot
Detail:
*GT2 Timing Pulley fits for Reprap 3D Printer 6mm Belt.
*With high performance and durability.
*East to install.
*Item Condition:100% Brand New
*Material:Aluminum
*Color:Black (As Pictures Show)
*Teeth: No teeth
*Fits belt width: 6mm(Approx.)
*Bore diameter: 3mm(ID3)/ 5mm(ID5) (Optional)
Package Contents:
Option1#:
1*GT2 Timing Pulley
Option2#:
3*GT2 Timing Pulley
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Timing belt 1pc Engine Component Replacement Useful Durable Industrial
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Rubber
*Model: 110XL031
*Belt Section: XL
*Number of Teeth: 55
*Width: approx. 0.31 inch (7.87mm)
*Pitch: approx. 0.2 inch (5.1mm)
*Perimeter: approx. 11inch (279.4mm)
*Fit for black decker 429964-3
*Optional Size: 8mm,10mm
*Performance: Tensile strength ≥80N/mm Reference force 60N/mm elongation ≤4% ) Hardness 75±5
Package Contents:
1*Timing belt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Timing belt 1pc Engine Component Replacement Useful Durable Industrial
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Rubber
*Model: 110XL031
*Belt Section: XL
*Number of Teeth: 55
*Width: approx. 0.31 inch (7.87mm)
*Pitch: approx. 0.2 inch (5.1mm)
*Perimeter: approx. 11inch (279.4mm)
*Fit for black decker 429964-3
*Optional Size: 8mm,10mm
*Performance: Tensile strength ≥80N/mm Reference force 60N/mm elongation ≤4% ) Hardness 75±5
Package Contents:
1*Timing belt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

110XL031 Black Timing Belt 55 Teeth Rubber Kit For Sander Black Decker 429964 3
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Rubber
*Model: 110XL031
*Belt Section: XL
*Number of Teeth: 55
*Width: approx. 0.31 inch (7.87mm)
*Pitch: approx. 0.2 inch (5.1mm)
*Perimeter: approx. 11inch (279.4mm)
*Fit for black decker 429964-3
*Optional Size: 8mm,10mm
*Performance: Tensile strength ≥80N/mm Reference force 60N/mm elongation ≤4% ) Hardness 75±5
Package Contents:
1*Timing belt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

110XL031 Black Timing Belt 55 Teeth Rubber Kit For Sander Black Decker 429964 3
Details:
*100% brand new and high quality
*Color: Black (As Pictures Show)
*Material: Rubber
*Model: 110XL031
*Belt Section: XL
*Number of Teeth: 55
*Width: approx. 0.31 inch (7.87mm)
*Pitch: approx. 0.2 inch (5.1mm)
*Perimeter: approx. 11inch (279.4mm)
*Fit for black decker 429964-3
*Optional Size: 8mm,10mm
*Performance: Tensile strength ≥80N/mm Reference force 60N/mm elongation ≤4% ) Hardness 75±5
Package Contents:
1*Timing belt
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.