Mechanikus erőátvitel

High quality Carbon brush Durable 10pcs For CB-303 194996-6 17X11X5MM Kit Parts
Features:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Easy to use, good performance and long life
*Precise manufacturing, quality assurance
*Buy once, use for a long time.
*Fine workmanship and long service life.
* Stable characteristics and high reliability.
*Carbon fiber brushes are one of the most important components in power tools (such as electric drills).
*Brush wear is usually the cause of poor motor operation.
*Replacement of brushes can repair intermittent motors.
*The new brush can restore the electric brake of the motor.
*Note: Do not polish or modify the product.
Specifications:
*Main color: as shown
*Quantity: 5 pairs of carbon brushes
*Material: carbon and metal
*Size: 17*11*5mm
Package list:
10*carbon brush
Tips:Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

CR Replace Carbon Brushes For D28110 D28112 D28402 DWE46151 Hot New Nice Quality
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Replacing brushes can fix a motor that's operating intermittently.
New brushes can restore a motor's electric braking.
Applicable: For D28110 D28112 D28402 DWE46151
Specification:
Product Type: Carbon Brush
Color: As the picture show
Quantity: 5 Pairs
Package Contents:
5 Pairs of Carbon Brushes
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

With Screws Belt Pulley Aluminum Parts 26pcs Timing Belt GT2 16T 5mm New
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* 8 PCS GT2 16T hole 5mm timing pulley and 5m belt For RepRap For Prusa For Mendel For 3D printer
* Please note that this is a 5mm hole wheel. These pulleys can be used for Ultimaker, for Ditto or other for 3D Pinter designs with similar kinematics. An aluminum GT2 pulley and an Allen key. Information about the printer firmware parameters see the drawing for dimensions and calculation steps per millimeter.
* For 3D printing applications, the GT2 2mm belt system is better than T5, T2.5, it provides better smoothness and positioning accuracy, resulting in better print quality
Specification:
GT2 Pulley:
* Tooth Number: 16
* Pitch: 2mm(Approx.)
* Hole Diameter: 5mm(Approx.)
* Flange: Double
* Tooth Width: 7.5mm (very suitable for 6mm timing belt)
* Fixed Screw: M3
* Material: Aluminum
GT2 Belt:
* Colour: Black(As pictures show)
* Pitch: 2mm(Approx.)
* Width: 6mm(Approx.)
* Material: Fiber-Reinforced Rubber
* Length: 5M(Approx.)
Package Contents:
1 * GT2 Belt
8 * GT2 Pulleys
16 * Screws
1 * Wrench (As pictures show)
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

200PCS Steel Ball Dia 8mm High Precision Bearing Balls Smooth Ball Accessories
Details:
*100% brand new and high quality.
* Rugged, easy to use, your good assistant for work and life.
*Precisely manufactured, long-term use.
*Easy to install and easy to use
*The quantity is large, reducing unnecessary expenses.
Specifications:
*Type: steel ball
*Material: Steel
*Size: 8mm
*Quantity: 200
*Color: as shown
Package list:
200*steel ball
Tips:
Conversion: 1inch = 2.54cm, 1cm = 0.393inches
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.

20pcs Ball Wheel Bearings 608ZZ Scooter Inline skating shoes Practical
Details:
*20pcs Ball Wheel Bearings for Skateboard Skating Shoes
*Deep groove ball bearings
*Smooth moving, high performance
*High precision and reliability
*Applications: skateboards, inline skating shoes, scooter, etc.
*Material: Carbon steel
*Outer diameter: 22mm(Approx.)
*Inner diameter: 8mm(Approx.)
*Thickness: 7mm(Approx.)
Package Contents:
20pcs Bearings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

High precision Ball Wheel Bearings Dual Shielded Scooter Steel Durable
Details:
*20pcs Ball Wheel Bearings for Skateboard Skating Shoes
*Deep groove ball bearings
*Smooth moving, high performance
*High precision and reliability
*Applications: skateboards, inline skating shoes, scooter, etc.
*Material: Carbon steel
*Outer diameter: 22mm(Approx.)
*Inner diameter: 8mm(Approx.)
*Thickness: 7mm(Approx.)
Package Contents:
20pcs Bearings
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

3pcs/KIT Carbon Brushes For Milwaukee Tools M18 Drill 2602-20 2650-20 27W 18V
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Perfect to replace your old or worn one
Fit for 2650-20 compact drill assembly
Specifications:
Material: Metal & Carbon
Voltage: 18V
Power: 27W
Current: 1.5A
Black Wire: Negative
Red Wire: Positive
Diameter: 49.8mm(Approx.)
Cable Length: 112mm(Approx.)
Quantity: 3
Fitment:(Just For Conference.)
For HD18PD, HD18DD, HD18DD, C18ID C18PD C18IW,Impact Driver 2650-20 2601-20(B28C)1/2" Compact Driver Drill
For 2601-20(B28B)1/2" For Compact Driver Drill
For 2652-20(B78B)18 Volt 1/2" For Square Impact Driver
For 2651-20(B77B)18 Volt 3/8" For Square Impact Driver
For 2650-20(B55B)18 Volt 1/4" For Hex Impact Driver
For 2602-20(SER C15A)M18 1/2" For Compact For Hammer Drill
For HD 18 PD For Combi For Hammer Drill
For C18PD For Combi For Hammer Drill
For HD18PP2A For COMBI SET
For C18ID For IMPACT DRIVER
Package Contents:
3 x Carbon Brushes
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Carbon Brushes Accessories Replaces 3pcs/KIT 2602-20 2650-20 C18ID Useful
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Perfect to replace your old or worn one
Fit for 2650-20 compact drill assembly
Specifications:
Material: Metal & Carbon
Voltage: 18V
Power: 27W
Current: 1.5A
Black Wire: Negative
Red Wire: Positive
Diameter: 49.8mm(Approx.)
Cable Length: 112mm(Approx.)
Quantity: 3
Fitment:(Just For Conference.)
For HD18PD, HD18DD, HD18DD, C18ID C18PD C18IW,Impact Driver 2650-20 2601-20(B28C)1/2" Compact Driver Drill
For 2601-20(B28B)1/2" For Compact Driver Drill
For 2652-20(B78B)18 Volt 1/2" For Square Impact Driver
For 2651-20(B77B)18 Volt 3/8" For Square Impact Driver
For 2650-20(B55B)18 Volt 1/4" For Hex Impact Driver
For 2602-20(SER C15A)M18 1/2" For Compact For Hammer Drill
For HD 18 PD For Combi For Hammer Drill
For C18PD For Combi For Hammer Drill
For HD18PP2A For COMBI SET
For C18ID For IMPACT DRIVER
Package Contents:
3 x Carbon Brushes
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Model Passive Round Pulley Round Gear Wheel Tool 20Pcs Printer Plastic
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
Large model passive round pulley for 3D printer.
23.89mm outer diameter, 10.23mm thickness, 5mm bore.
1 set of 20pcs.
Specifications:
Material: POM
Outside Diameter: 23.89mm(Approx.)
Inner Diameter: 16mm(Approx.)
Bore: 5mm(Approx.)
Thickness: 10.23mm(Approx.)
With Bearings: Yes
Bearing: 625zz Bearing
Quantity: 20pcs
Size(Single): 23.89 * 16 * 10.23mm(Approx.)
Package Contents:
20 * Passive Round Pulley
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10pcs Ball Bearing Steel Housing Pillow Block Self-aligning Parts For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x Bearing Steel Housing Pillow Block Self-Aligning Replacement For 3D Printer
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10 X KP001 Bore Hole Diameter Ball Bearing Housing Pillow Block Self-aligning US
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x KP08 8-15mm Bore Zinc Alloy 2-Bolt Self-aligning Flange Mounted Ball Bearing
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

10x/kit KP001 Hole Diameter Ball Bearing Steel For 3D Printer Maintenance Set
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* Metal bearing kit for maintenance and replacement for 3D printer accessories.
* The shaft diameter of the ball bearing housing is 8mm / 10mm / 12mm / 15mm.
* With seven models available to choose from
* High quality components ensure efficient operation of 3D printers.
Specification:
*Optional Model: KFL08-8mm / KFL000-10mm / KFL001-12mm / KFL002-15mm / KP08-8mm / KP000-10mm / KP001-12mm
*Shell Material: Zinc Alloy
*Bearing Material: Bearing Steel
*Shaft Diameter: 8mm / 10mm / 12mm / 15mm(Approx.)
*Color: As pictures show
*Quantity: 10
Package Contents:
10*Bearings
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Cap Plastic Metal Carbon Brushes Repair Tool 90mm For Makita DGA452RMJ DGA452SFE
Details:
*100% brand new and high quality
*Made of high quality material, durable and practical to use
*Fit for Makita DGA452RMJ DGA452SFE DGA452FE3 DGA452RFE
DGA452 DGA452RMJ DGA452 DGA402RFE DGA402RME
DGA402RFE DGA402RME DGA402Z DGA402FSJ
DGA402Z DGA450 DGA450RFE DGA450RME DGA450RM
BGA450 BGA450RFE BGA452RFE BGA402RFE BGA452
BGA452RFE3 BGA452SFE BGA452RFE3 BGA452
BGA402RFE BGA402RFE GA402DGA402D GA452D Series
*Part Number:619218-8 / 619218B8
*Material: Plastic /Metal
*Length: 90mm (Approx.)
*Color: As Pictures Show
Package Contents:
2*Carbon Brushes
1*Armature
1*Carbon Brush Holder
2*Cap
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Carbon Brush Accessory 6506379 Switch Steel Accessory New High Quality Useful
Item Details:
100% brand new and high quality
Made of high quality material, durable and practical to use
High performance spare parts, easy to use.
Switch for 6506379 DDF456Z BHP446Z BDF456Z BDF456RFE BDF446Z Accessories for power tools.
Material: Steel
Size: 4.5 cm(Approx.)
Package Contents:
1 * Switch
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Miniature pulleys which will push-fit on to 2mm shafts, commonly found on miniature motors.Manufactured in high-impact polystyrene
Bore: 2mm
Diameter: 8mm
Download a Full Datasheet
This Buy it Now is for a pack of 2 this item

Mild Steel Ball Bearings are great for demonstrations and experiments with magnets and magnetism. Can be used for making the traditional get the ball into the hole types of puzzle or maze games.
Spiratronics Part Number: AQ1-513
This Buy It

Mild Steel Ball Bearings are great for demonstrations and experiments with magnets and magnetism. Can be used for making the traditional get the ball into the hole types of puzzle or maze games.
Spiratronics Part Number: AQ1-515
This Buy It

Mild Steel Ball Bearings are great for demonstrations and experiments with magnets and magnetism. Can be used for making the traditional get the ball into the hole types of puzzle or maze games.
Spiratronics Part Number: AQ1-514
This Buy It