Egyéb teszt, mérés és ellenőrzés

Feature:
100% brand new and high quality.
High quality tools for the professional
Hand Drill for Wood.
Hand Drill Manual Drill Model Woodworking Drilling Tool
Hand Twist Drill Jade Jewelers Drilling Tool
Jeweler's hand Drill for Micro Bits
Manual Craft Hand Drill
Hand Drill Manual Drill Carpentry Tool
Great for Wood Crafts & Hobby Projects.
Works great with wood crafts and all types of hobby projects.
Easy to adjust and readjust.
Use for jewelry & watch fabrication & repair
Classic jewelers tool for use with micro-sized drill bits or other accessories
Specifications:
chuck Capacity:0.6mm to 10mm
Material:Metal plastic
Using manual drill for model railroading
great for drilling small holes and for working on model trains or other type of cars needing small holes
Fit materials:Wood,horn,amber,Ivory,olive,walnut,model,Pcb,plastic small hole drilling

Feature:
100% brand new and high quality.
High quality tools for the professional
Hand Drill for Wood.
Hand Drill Manual Drill Model Woodworking Drilling Tool
Hand Twist Drill Jade Jewelers Drilling Tool
Jeweler's hand Drill for Micro Bits
Manual Craft Hand Drill
Hand Drill Manual Drill Carpentry Tool
Great for Wood Crafts & Hobby Projects.
Works great with wood crafts and all types of hobby projects.
Easy to adjust and readjust.
Use for jewelry & watch fabrication & repair
Classic jewelers tool for use with micro-sized drill bits or other accessories
Specifications:
chuck Capacity:0.6mm to 10mm
Material:Metal plastic
Using manual drill for model railroading
great for drilling small holes and for working on model trains or other type of cars needing small holes
Fit materials:Wood,horn,amber,Ivory,olive,walnut,model,Pcb,plastic small hole drilling

Feature:
100% brand new and high quality.
High quality tools for the professional
Hand Drill for Wood.
Hand Drill Manual Drill Model Woodworking Drilling Tool
Hand Twist Drill Jade Jewelers Drilling Tool
Jeweler's hand Drill for Micro Bits
Manual Craft Hand Drill
Hand Drill Manual Drill Carpentry Tool
Great for Wood Crafts & Hobby Projects.
Works great with wood crafts and all types of hobby projects.
Easy to adjust and readjust.
Use for jewelry & watch fabrication & repair
Classic jewelers tool for use with micro-sized drill bits or other accessories
Specifications:
chuck Capacity:0.6mm to 10mm
Material:Metal plastic
Using manual drill for model railroading
great for drilling small holes and for working on model trains or other type of cars needing small holes
Fit materials:Wood,horn,amber,Ivory,olive,walnut,model,Pcb,plastic small hole drilling

99.96% Pure Nickel Plate Strap Strip Sheets pure nickel for Battery electrode Spot Welding Machine 0.15mm x 10mm x5000mm 5m/roll
 
Features in good welding performance, high tensile tension, low resistivity
Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteries, polymer batteries, power batteries and instrumentation, high-power power tools batteries, laptop batteries, batteries and HM combination of telecommunications, vacuum, industry
 
Nickel content: >/=99.96%
Thickness:0.15mm
Length: 5m
width:10mm
Packing Including: 1 *roll  0.15mm*10mm*5000mm    pure nickel strips.
Note: we also have other sizes, if you need other size you can contact me for it.

ESD anti-static tweezers; stainless steel and anti-static paint manufacturing as anti-static tweezers, the appearance of high-grade, plus hard, fine workmanship, durable, anti-magnetic, anti-corrosion, anti-static, anti-static magnetic components in the operation To improve convenience, improve work efficiency and the safety of components, can reduce the fatigue of overtime work.
Tweezers head with superhard materials, and heat treatment, so that the hardness of the tweezers higher, better toughness
 
ESD-10 (standard): used for solder integrated circuit, as well as the installation or replacement of parts.
ESD-11 (large): This tweezers are longer than the standard length and are suitable for operation in precision electronic components.
ESD-12 (high elasticity): This tweezers are more powerful than standard tweezers and do not bend when the circuit board is clamped, and the parts do not fall.
ESD-13 (round): This round avoids damage to the component, suitable for extraction of chip chips;
ESD-14 (extra-thin): This tweezers are sharp, sharp, and suitable for use in high-density integrated circuit chip components.
ESD-15: This tweezers are bent at 45 ° and are suitable for extracting parts at narrow locations.
ESD-16 (wide type): This tweezers tip is a standard, but the handle widened, to adapt to some of the larger fingers, with a more comfortable feel.
ESD-17: This tweezers are bent 25 ° and are suitable for extracting parts at narrow locations.
List: 1 * anti-static tweezers

Sub fine dust-free cloth, mobile phone lens cleaning cloth soft touch
Product advantages:
1: low wool fiber, low dust discharge and low ion release;
2: excellent water absorption and oil absorption function;
3: strong dust removal, enough dry and wet strength;
4: soft touch, will not damage the surface of the object;
5: not easy to cause chemical reactions;
6: using open fiber treatment;
7: it has high wear resistance.
Specifications: 6 inch /4 inch /9 inch
Quantity: 100pcs/400pcs/100pcs

Sub fine dust-free cloth, mobile phone lens cleaning cloth soft touch
Product advantages:
1: low wool fiber, low dust discharge and low ion release;
2: excellent water absorption and oil absorption function;
3: strong dust removal, enough dry and wet strength;
4: soft touch, will not damage the surface of the object;
5: not easy to cause chemical reactions;
6: using open fiber treatment;
7: it has high wear resistance.
Specifications: 6 inch /4 inch /9 inch
Quantity: 100pcs/400pcs/100pcs

Sub fine dust-free cloth, mobile phone lens cleaning cloth soft touch
Product advantages:
1: low wool fiber, low dust discharge and low ion release;
2: excellent water absorption and oil absorption function;
3: strong dust removal, enough dry and wet strength;
4: soft touch, will not damage the surface of the object;
5: not easy to cause chemical reactions;
6: using open fiber treatment;
7: it has high wear resistance.
Specifications: 6 inch /4 inch /9 inch
Quantity: 100pcs/400pcs/100pcs

12 sticks internal carving knife details:
1 large flat knife width 7.2mm
1 moon machete width 6.2mm
1 large skewer width 7.2mm (bevel length 10mm)
1 small flat knife width 5.3mm
1 small bevel width 5.5mm (bevel length 9.2mm)
1 needle blade width 2.9mm (bevel side length 3.4mm)
1 blade width 7.8mm (bevel side length 6.7mm)
1 triangular knife width 5.7mm
1 triangular knife width 4.0mm
1 small semi-circular knife 4.3mm wide
1 medium knife width 6.6mm
1 large semi-circular knife width 8.4mm
The length of the knife is 135mm The length of the head is 25mm The handle is 110mm The diameter of the handle is 12mm
Package A: 12pcs mahogany carving knife free random grinding stone plastic box
Package B: 12pcs mahogany carving knife free random grindstone canvas bag
Package C: 12pcs white wood cutter free random grindstone plastic box
Package D: 12pcs white wood knife free random grindstone canvas bag

12 sticks internal carving knife details:
1 large flat knife width 7.2mm
1 moon machete width 6.2mm
1 large skewer width 7.2mm (bevel length 10mm)
1 small flat knife width 5.3mm
1 small bevel width 5.5mm (bevel length 9.2mm)
1 needle blade width 2.9mm (bevel side length 3.4mm)
1 blade width 7.8mm (bevel side length 6.7mm)
1 triangular knife width 5.7mm
1 triangular knife width 4.0mm
1 small semi-circular knife 4.3mm wide
1 medium knife width 6.6mm
1 large semi-circular knife width 8.4mm
The length of the knife is 135mm The length of the head is 25mm The handle is 110mm The diameter of the handle is 12mm
Package A: 12pcs mahogany carving knife free random grinding stone plastic box
Package B: 12pcs mahogany carving knife free random grindstone canvas bag
Package C: 12pcs white wood cutter free random grindstone plastic box
Package D: 12pcs white wood knife free random grindstone canvas bag

12 sticks internal carving knife details:
1 large flat knife width 7.2mm
1 moon machete width 6.2mm
1 large skewer width 7.2mm (bevel length 10mm)
1 small flat knife width 5.3mm
1 small bevel width 5.5mm (bevel length 9.2mm)
1 needle blade width 2.9mm (bevel side length 3.4mm)
1 blade width 7.8mm (bevel side length 6.7mm)
1 triangular knife width 5.7mm
1 triangular knife width 4.0mm
1 small semi-circular knife 4.3mm wide
1 medium knife width 6.6mm
1 large semi-circular knife width 8.4mm
The length of the knife is 135mm The length of the head is 25mm The handle is 110mm The diameter of the handle is 12mm
Package A: 12pcs mahogany carving knife free random grinding stone plastic box
Package B: 12pcs mahogany carving knife free random grindstone canvas bag
Package C: 12pcs white wood cutter free random grindstone plastic box
Package D: 12pcs white wood knife free random grindstone canvas bag

12 sticks internal carving knife details:
1 large flat knife width 7.2mm
1 moon machete width 6.2mm
1 large skewer width 7.2mm (bevel length 10mm)
1 small flat knife width 5.3mm
1 small bevel width 5.5mm (bevel length 9.2mm)
1 needle blade width 2.9mm (bevel side length 3.4mm)
1 blade width 7.8mm (bevel side length 6.7mm)
1 triangular knife width 5.7mm
1 triangular knife width 4.0mm
1 small semi-circular knife 4.3mm wide
1 medium knife width 6.6mm
1 large semi-circular knife width 8.4mm
The length of the knife is 135mm The length of the head is 25mm The handle is 110mm The diameter of the handle is 12mm
Package A: 12pcs mahogany carving knife free random grinding stone plastic box
Package B: 12pcs mahogany carving knife free random grindstone canvas bag
Package C: 12pcs white wood cutter free random grindstone plastic box
Package D: 12pcs white wood knife free random grindstone canvas bag

Product Description
P1600B 10-in-1 test lead kit
By Cleqee
Features and specifications:
P1600B test lead kit contents: Standard 4 mm banana plug test lead, large safety alligator clip (1 pair), small safety alligator clip (1 pair), replaceable probe body (1 pair), and large test hook (1 pair). Versatile and portable.
Showcase
 
Kit contents
 
4 mm banana plug test leads (100 cm)
 
Interchangeable probes
 
Test hooks
 
High-quality safety alligator clips
 
High-quality safety alligator clips
 
Product combinations
 
Product combinations
 
Packaging
S
 
SERVICES
 
 
Hot selling products from top sellers
Dedicated customer service

Product Description
ISDS205A PC USB oscilloscope
By Instrustar
Product Description
ISDS205A 3 IN 1 multifunctional 20M virtual digital oscilloscope spectrum analyzer data recorder PC USB oscilloscope
ISDS205A dual-channel digital oscilloscope, with conservative quality. Crafted bandwidth of 20M, 48M sampling rate, 2 channels, alternating support X, Y and XY alternating pattern of two-channel virtual oscilloscope, spectrum analyzer, data recorder. The device communicates with a PC via high speed USB 2.0.
Parameters
Product showcase
 
Item images
 
Shipping list
 
Virtual oscilloscope mainframe
 
Virtual oscilloscope mainframe oscilloscope probes
 
USB 2.0
 
BNC interface
 
Oscilloscope side view
 
PC Software operation interface display
 
PC Software operation interface display
 
Packaging
 
 
SERVICES
 
 
Hot selling products from top sellers
Dedicated customer service

Hantek HT30A Test Leads 3M Test Lead BNC to Banana Adapter Cable Factory direct sales 
 
Product Description 
 
 
Auto Test Leads (HT30A)
Test lead of a male BNC connector to (2) 4mm connectors. It's a special line for assisting automobile measurement instruments to test various types of signals. 4mm connectors are coded in two colors, black and red. Lead length 30 meter.
The Auto Test Cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
It adopts full shield which can help reduce the noise interference.
To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length. 
The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.

2017  Hantek Auto Test Cable Dual Banana Head Multipurpose Test Line BNC to Banana Adapter Cable Heavy Duty Auto Test Leads (HT30A)
Test lead of a male BNC connector to (2) 4mm connectors. It's a special line for assisting automobile measurement instruments to test various types of signals. 4mm connectors are coded in two colors, black and red. Lead length is about 3 meter.
Features:
The auto test cable (HT30A) is a kind of special line for assisting automobile measurement instruments to test various types of signals.
High quality and professional high voltage auto test lead.
It's about 3 meter in length allows the oscilloscope to be placed on the work bench away from the car being tested or repaired.
It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.
It adopts full shield which can help reduce the noise interference.
Note:
To avoide the lines twisting together, the two pieces of lines with connectors are not the same in length. 
The short line is earth wire, and the long line is positive pole which should be connected with the auto engine cable, which also can cooperate with a 20:1 attenuator.
Specifications:
Probe Quantity: 1 pc
Peak Attenuation Ratio: 10000:1
Input Resistance: 50
Length: Approx. 2.9m / 9.5ft
Item Weight: 148.5g / 5.2oz
Package Size: 24.5 * 17.5 * 3cm / 9.6 * 6.9 * 1.2in
Package Weight: 154g / 5.4oz
Package List:
1 * Auto Test Lead

5kg/1g  Libra Digital Kitchen Scales Counting Weighing electronic balance scale Tempered glass tray
1.Multi-function:Whether you are weighing gold, powder,medication or anything for cooking,this scale has the right measurements for you
2.High weigh capacity and accuracy:5kg/1g,Scale is able to weigh in various measurements,making it perfect for all your weighing needs
3.Precision auto tare option to calculate ingredients without measuring the weight of the container,saving your time
4.Compact design: easy storage and portability.   
5.Tempered glass tray, clean and hygienic, high-end atmosphere
1g accuracy
Low battery & Overload indicator
Calibration available , weights not included
Weighing modes : g / oz / lb
Counting function
Tare function
Auto shut off if not use in 60 secs. 
Powered by  2 AA Batteries (NOT INCLUDED)
platform size : 155 x155mm
1.place scale on the horizobtal flat surface, press ON/OFF switch 
2.Wait until “0.0” is displayed
3.Put the object(s) on the weighing platform
100% Brand New
1 x  Kitchen Weight Scale
1 x  Instruction Manual 
without  counterweight,  pls pay attention
 

2017 HOT! 6pcs gold Stainless Steel Industrial Anti-static Tweezers watchmaker Repair Tools Excellent Quality HL-10A ~ 15A
6 Pcs high-end gold (Regal Gold) tweezers series, precision tweezers HL-10A ~ 15A six choose one watchmaker Repair Tools Excellent Quality
Thick super-hard type,
Appearance of high-grade,
Fine workmanship,
Anti-static, anti-static in the operation of magnetic components containing magnetic work to improvement convenience, improve work efficiency and the safety of components can reduce the fatigue of overtime work.
HL-10A (standard type): for solder integrated circuit chip, and the installation or replacement of parts.
HL-11A (large): This tweezers are longer than the standard length and are suitable for operation in precision electronic components.
HL-12A (high elasticity): This tweezers are more powerful than standard tweezers, and do not bend when the clamp is clamped with a strong clip, and the parts do not fall.
HL-13A (round): This round can avoid damage to the components, suitable for chip chip
HL-14A (Fine): This tweezers are very sharp, sharp and sharp, suitable for operation in high-density integrated circuit chip components.
HL-15A (Eagle Tsui): This tweezers twist 450 °, suitable for extraction in the narrow parts.
(Dear friend, if you do not give us a message, tell us what model you need,
We will send you a random, thank you for your understanding.
 
Note: Keep out of reach of children!
 
Package Included:
 HL-15A  tweezers*1,
HL-14A tweezers*1 ,
HL-13A tweezers*1
 HL-12A tweezers*1,
HL-11A tweezers*1,
HL-10A tweezers*1
There are other requirements on the model can tell us,
All models can be arbitrarily selected 6

Product Description
High-voltage oscilloscope probe
By Cleqee
Features and specifications:
Universal 100:1 high-voltage oscilloscope probe
Specifications:
• 100:1 attenuation
• Input resistance of 100 megohms
• Input capacitance of 6 pF
• Compensation range: 10 - 35 pF
• Bandwidth: 100 MHz
• Rise time: 3.5 ns
• Maximum operating voltage: 2 KV (Vp-p)
• Length: 1.2 meters
Package includes:
• 1 x Probe
• 4 x Color ring
• 1 x User manual
Showcase
 
Showcase
 
Oscilloscope probe body
 
Grounding lead
 
CH color circle
 
Test hook
 
IC test protection cap
 
Circle color can be changed
 
Adjustable capacitor for calibrating oscilloscope probes
 
Test hook for easy measurement
 
Packaging
 
SERVICES
Hot selling products from top sellers
Dedicated customer service

99.96% Pure Nickel Plate Strap Strip Sheets pure nickel for Battery electrode Spot Welding Machine  0.15mm *7mm
 
Features in good welding performance, high tensile tension, low resistivity
Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteries, polymer batteries, power batteries and instrumentation, high-power power tools batteries, laptop batteries, batteries and HM combination of telecommunications, vacuum, industry
 
Nickel content: >/=99.96%
Thickness:0.15mm
width:7mm
Packing Including: 1 *roll  0.15mm*7mm*5000mm    pure nickel strips.
Note:
We are a metal processing factory, producing pure nickel, nickel-plated steel, copper, aluminum-magnesium composite belt, tungsten and other metal materials, please consult!
We currently have the following specifications of pure nickel and nickel-plated steel strip:
0.1mmX2mm, 0.1mmX3mm, 0.1mmX4mm, 0.1mmX5mm, 0.1mmX6mm, 0.1mmX7mm, 0.1mmX8mm, 0.1mmX10mm, 0.1mmX20mm, 0.1mmX55mm
0.12mmX3mm, 0.12mmX6mm, 0.12mmX8mm,
0.15mmX4mm, 0.15mmX5mm, 0.15mmX6mm, 0.15mmX7mm, 0.15mmX8mm, 0.15mmX10mm, 0.15mmX12mm, 0.15mmX25mm, 0.15mmX30mm, 0.15mmX75mm, 0.15mmX138mm,
0.2mmX2mm, 0.2mmX4mm, 0.2mmX5mm, 0.2mmX6mm, 0.2mmX7mm, 0.2mmX8mm, 0.2mmX10mm, 0.2mmX12mm, 0.2mmX50mm,
0.3mmX8mm, 0.3mmX10mm
0.5mmX10mm,

 
0.12mm x 6mm x 100mm 99.96% Pure Nickel Plate Strap Strip Sheets pure nickel for Battery electrode Spot Welding Machine
Features in good welding performance, high tensile tension, low resistivity
Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteries, polymer batteries, power batteries and instrumentation, high-power power tools batteries, laptop batteries, batteries and HM combination of telecommunications, vacuum, industry
 
Nickel content: >/=99.96%
Thickness x Width x Length:
0.12mm x 6mm x 100mm
Packing Including: 100pcs 0.12mm x 6mm x 100mm  pure nickel strips.
Note:
We are a metal processing factory, producing pure nickel, nickel-plated steel, copper, aluminum-magnesium composite belt, tungsten and other metal materials, please consult!
We currently have the following specifications of pure nickel and nickel-plated steel strip:
0.1mmX2mm, 0.1mmX3mm, 0.1mmX4mm, 0.1mmX5mm, 0.1mmX6mm, 0.1mmX7mm, 0.1mmX8mm, 0.1mmX10mm, 0.1mmX20mm, 0.1mmX55mm
0.12mmX3mm, 0.12mmX6mm, 0.12mmX8mm,
0.15mmX4mm, 0.15mmX5mm, 0.15mmX6mm, 0.15mmX7mm, 0.15mmX8mm, 0.15mmX10mm, 0.15mmX12mm, 0.15mmX25mm, 0.15mmX30mm, 0.15mmX75mm, 0.15mmX138mm,
0.2mmX2mm, 0.2mmX4mm, 0.2mmX5mm, 0.2mmX6mm, 0.2mmX7mm, 0.2mmX8mm, 0.2mmX10mm, 0.2mmX12mm, 0.2mmX50mm,
0.3mmX8mm, 0.3mmX10mm
0.5mmX10mm,

5Pcs 951 10ml Soldering Rosin Flux Pen Low-Solids Non-clean For Solar cell panel DIY kester solder power Free Shipping
Wholesale quality kester 951 welding pen lead-free environmental protection free help welding pen
Cheap, quality assurance, stock supply.
Specifications: Length: 13.5cm Diameter: 1.5cm
951 Soldering pen Description:
This product is filled with environmentally friendly cleaning flux by default. If you have any other requirements, please contact me. The welding pen is widely used in the PCB / FPC board welding process. It is easy to carry and easy to operate. The welding pen is a one-time use. Wrong, do not open the added flux.
To prevent flux volatilization, to ensure that the flux characteristics of the same
If you add alcohol, help welding pen can be used for cleaning brush transparent pen, easy to understand the use of flux or detergent.
Help pen use:
1. Before welding, apply flux on the base metal (improve the wetting)
2. By applying the flux to the object at the time of correction, the wax can be removed and the wettability can be improved.
3. Alcohol and other solvents can be used to clean the substrate (prohibit the use of organic solvents)
Flux (flux): in the welding process can help and promote the welding process, but also has a protective effect, to prevent oxidation of chemical substances. Flux can be divided into solid, liquid and gas. There are several aspects such as "auxiliary heat conduction", "removal of oxide", "reduction of surface tension of welded material", "removal of oil surface of welded material, increase of welding area", "prevention of reoxidation" There are two more critical aspects of the role: "remove the oxide" and "reduce the surface tension of the material being welded."

99.96% Pure Nickel Plate Strap Strip Sheets pure nickel for Battery electrode Spot Welding Machine 0.1mm x 8mm
 
Features in good welding performance, high tensile tension, low resistivity
Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteries, polymer batteries, power batteries and instrumentation, high-power power tools batteries, laptop batteries, batteries and HM combination of telecommunications, vacuum, industry
 
Nickel content: >/=99.96%
Thickness:0.1mm
width:8mm
Packing Including: 1 *roll  0.1mm*8mm  pure nickel strips.
Note:
We are a metal processing factory, producing pure nickel, nickel-plated steel, copper, aluminum-magnesium composite belt, tungsten and other metal materials, please consult!
We currently have the following specifications of pure nickel and nickel-plated steel strip:
0.1mmX2mm, 0.1mmX3mm, 0.1mmX4mm, 0.1mmX5mm, 0.1mmX6mm, 0.1mmX7mm, 0.1mmX8mm, 0.1mmX10mm, 0.1mmX20mm, 0.1mmX55mm
0.12mmX3mm, 0.12mmX6mm, 0.12mmX8mm,
0.15mmX4mm, 0.15mmX5mm, 0.15mmX6mm, 0.15mmX7mm, 0.15mmX8mm, 0.15mmX10mm, 0.15mmX12mm, 0.15mmX25mm, 0.15mmX30mm, 0.15mmX75mm, 0.15mmX138mm,
0.2mmX2mm, 0.2mmX4mm, 0.2mmX5mm, 0.2mmX6mm, 0.2mmX7mm, 0.2mmX8mm, 0.2mmX10mm, 0.2mmX12mm, 0.2mmX50mm,
0.3mmX8mm, 0.3mmX10mm
0.5mmX10mm,

Multifunctional Multimeter Probe Kit
Model:P1600A (4 IN 1)
1. 4mm Banana Plug - Banana Plug Test Leads*2(Red black each 1, Wire Length:1m)
2. Pluggable Multimeter Probe :
   Test Table Stick*2 (red black each 1 )
   Replaceable Needles (gilded sharp needle *4 ,standard needle *4)
   Protective Cap*2 (red black each 1)
3.Big Alligator Clip *2 (red black each 1)
4.Small Alligator Clip *2 (red black each 1)
 
 
SERVICES
 
 
Hot selling products from top sellers
Dedicated customer service

Product Description
Oscilloscope probes
By Cleqee
Features and specifications:
Model: P2060
Bandwidth: DC-60MHz
Rise time: 5.8ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size:110 ± 2cm
Weight: About 130g/set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2100
Bandwidth: DC-100MHz
Rise time: 3.5ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2200
Bandwidth: DC-200MHz
Rise time: 1.75ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:13pF-17pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 10-35 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 1 x Probe
• 8 x Marker rings
• 1 x Ground Lead
• 2 x Locating sleeves
• 1 x Adjustment Tool
• 1 x Ground Spring (Only P2200)
• 1 x User manual
Showcase
 
P2060 and P2100
 
P2200
 
Oscilloscope probe body
 
Test hook
Grounding lead
 
Adjustable capacitor for calibrating oscilloscope probes.
 
 
 
Ground spring (only P2200)
SERVICES
Hot selling products from top sellers
Dedicated customer service

Product Description
Oscilloscope probes
By Cleqee
Features and specifications:
Model: P2060
Bandwidth: DC-60MHz
Rise time: 5.8ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size:110 ± 2cm
Weight: About 130g/set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2100
Bandwidth: DC-100MHz
Rise time: 3.5ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2200
Bandwidth: DC-200MHz
Rise time: 1.75ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:13pF-17pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 10-35 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 1 x Probe
• 8 x Marker rings
• 1 x Ground Lead
• 2 x Locating sleeves
• 1 x Adjustment Tool
• 1 x Ground Spring (Only P2200)
• 1 x User manual
Showcase
 
P2060 and P2100
 
P2200
 
Oscilloscope probe body
 
Test hook
Grounding lead
 
Adjustable capacitor for calibrating oscilloscope probes.
 
 
 
Ground spring (only P2200)
SERVICES
Hot selling products from top sellers
Dedicated customer service

Product Description
Oscilloscope probes
By Cleqee
Features and specifications:
Model: P2060
Bandwidth: DC-60MHz
Rise time: 5.8ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size:110 ± 2cm
Weight: About 130g/set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2100
Bandwidth: DC-100MHz
Rise time: 3.5ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:14pF-18pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 14 - 45 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 2 x Probes
• 8 x Marker rings
• 2 x Ground leads
• 2 x Locating sleeves
• 1 x Adjustment tool
• 1 x User manual
--------------------------------------------------------------------------------------------
Model: P2200
Bandwidth: DC-200MHz
Rise time: 1.75ns
Attenuation ratio: 1X/10X
Input resistance: 1MΩ/10MΩ±2%
Input capacitance: 1X:70pF-120pF, 10X:13pF-17pF
Maximum input: 1X-200 working voltage (Vp-p), 10X-600 working voltage (Vp-p)
Compensation range: 10-35 pF
Operation environment: 0-50 ,0-80% RH
Storage environment: -20-60 ,0-90% RH
Size: 110 ± 2cm
Weight: About 130g/Set
Package includes:
• 1 x Probe
• 8 x Marker rings
• 1 x Ground Lead
• 2 x Locating sleeves
• 1 x Adjustment Tool
• 1 x Ground Spring (Only P2200)
• 1 x User manual
Showcase
 
P2060 and P2100
 
P2200
 
Oscilloscope probe body
 
Test hook
Grounding lead
 
Adjustable capacitor for calibrating oscilloscope probes.
 
 
 
Ground spring (only P2200)
SERVICES
Hot selling products from top sellers
Dedicated customer service

NO0.97 905E adjustable temperature soldering iron 60W internal heating ceramic heating core spot
Product Name: heating core
Power supply voltage: 220V- 50HZ
Rated power: 60W
Insulation resistance:> 100M ohm
Electrical strength: 3750V 1 minute without breakdown
Leakage current: 1mA or less
Capacitance: 20PF or less
Applicable model: NO.907
Particularly stable welding temperature, powerful power heating element
ultra-fast heating of the heating function, speed recovery temperature compensation
configuration lead-free long life welding Tsui, safe and reliable grounding device
environmental protection and energy conservation work, power consumption than ordinary iron low 50% ultra-longevity Japan imported heating core
List: 2 * 907H

Free Shipping ProsKit 1PK-036S Long Nose Plier (136mm) Non-slip Sharp nose pliers 1PK-037S Diagonal Cutting Plier (110mm)

Free Shipping ProsKit 1PK-036S Long Nose Plier (136mm) Non-slip Sharp nose pliers 1PK-037S Diagonal Cutting Plier (110mm)

Free Shipping ProsKit 1PK-036S Long Nose Plier (136mm) Non-slip Sharp nose pliers 1PK-037S Diagonal Cutting Plier (110mm)

 
HAKKO 936 Soldering Iron 907 handle with A1321 ceramic Heater for 936/937/928/926 Soldering Station 5pin 10pcs Solder Iron tip
Specifications:
NEW HIGH QUALITY
DESCRIPTION
LENGTH:190mm(7.5in.)
WEIGHT:44g(0.09lb.)
For Model: Hakko 907/ESD, Hakko 936 station.
Package included:
1 x SOLDERING SOLDER IRON handle with A1321 core
10pcs Solder Iron tip
Please make notice your soldering station use with hole or Pin

99.96% Pure Nickel Plate Strap Strip Sheets pure nickel for Battery electrode Spot Welding Machine 0.15mm x 3mm
 
Features in good welding performance, high tensile tension, low resistivity
Mainly used for nickel-metal hydride batteries, lithium batteries, pole ear, power tools, combined batteries, polymer batteries, power batteries and instrumentation, high-power power tools batteries, laptop batteries, batteries and HM combination of telecommunications, vacuum, industry
 
Nickel content: >/=99.96%
Thickness:0.15mm
width:3mm
Packing Including: 1 *roll  0.15mm*3mm   pure nickel strips.
Note:
We are a metal processing factory, producing pure nickel, nickel-plated steel, copper, aluminum-magnesium composite belt, tungsten and other metal materials, please consult!
We currently have the following specifications of pure nickel and nickel-plated steel strip:
0.1mmX2mm, 0.1mmX3mm, 0.1mmX4mm, 0.1mmX5mm, 0.1mmX6mm, 0.1mmX7mm, 0.1mmX8mm, 0.1mmX10mm, 0.1mmX20mm, 0.1mmX55mm
0.12mmX3mm, 0.12mmX6mm, 0.12mmX8mm,
0.15mmX4mm, 0.15mmX5mm, 0.15mmX6mm, 0.15mmX7mm, 0.15mmX8mm, 0.15mmX10mm, 0.15mmX12mm, 0.15mmX25mm, 0.15mmX30mm, 0.15mmX75mm, 0.15mmX138mm,
0.2mmX2mm, 0.2mmX4mm, 0.2mmX5mm, 0.2mmX6mm, 0.2mmX7mm, 0.2mmX8mm, 0.2mmX10mm, 0.2mmX12mm, 0.2mmX50mm,
0.3mmX8mm, 0.3mmX10mm
0.5mmX10mm,

Multi-function current testing probe set
By Cleqee
Features and specifications:
Contents:
- Red-Black banana plug testing leads
- Interchangeable probes
- INterchangeable testing pins
- Red & black alligator clips
- IC testing hook
 
 
Product images (left image: P1300B series; right image: P1300C series)
 
4mm Red & Black banana plug testing leads
 
Interchangeable testing probes, pins, and other instruments
 
High-quality and safe alligator clips
 
IC testing hook
 
Product combinations
 
Product combinations (P1300C only)
 
Packaging images
SERVICES
Hot selling products from top sellers
Dedicated customer service

Multi-function current testing probe set
By Cleqee
Features and specifications:
Contents:
- Red-Black banana plug testing leads
- Interchangeable probes
- INterchangeable testing pins
- Red & black alligator clips
- IC testing hook
 
 
Product images (left image: P1300B series; right image: P1300C series)
 
4mm Red & Black banana plug testing leads
 
Interchangeable testing probes, pins, and other instruments
 
High-quality and safe alligator clips
 
IC testing hook
 
Product combinations
 
Product combinations (P1300C only)
 
Packaging images
SERVICES
Hot selling products from top sellers
Dedicated customer service

 
Product Description
Banana plug to banana plug test leads
By Cleqee
Features and specifications:
Specifications:
• Material: Copper
• Plug size: 4 mm
• Suitable for: Testing
• Length: 1 meter
Key features:
• Can be used in electrical or laboratory electric testing work
• Useful for connecting components to wires
• Insulated plastic boots covers for safety and easy installation
• Ideal electronics component for testing electronics with multimeters and other instruments
• Five colors for easy differentiation of measurements
Showcase
 
Product images
 
4 mm Banana plug (stackable)
 
Insulated plastic boots covers for safety and easy installation
 
Useful for connecting components to wires
 
Five colors for easy differentiation of measurements.
 
Packaging
 
 
 
 
 

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

12Pcs Wood Carving Tools Set Chisel Gouges Woodcut Knife Scorper Hand Cutter for Arts Crafts DIY Tools Free millstone
note:
1.Because the material of the handle is wood, the pattern and color of different trees will be different. Please refer to the actual object received.
2. Part of the set free grindstone (the price difference is because the whetstone increases the freight), gifts grindstone does not provide a refund service, while the sharpening stone may appear damaged during transportation (whingstone is easy Damage parts) If you mind, please do not buy thank you!
[Type and Usage of Carving Tools]
Round knife: The edge of the knife is arc-shaped. It is mostly used for round and round dents. It is also useful for carving traditional flowers. For example, the rounded surfaces of flowers, leaves, and flowers need to be shaped by a round knife. Round cutters are relatively labor-saving and can adapt to large fluctuations and small changes. Moreover, the lines of the round knife are not certain, and are flexible and easy to explore. According to different uses, the round knife model should be different, the size range is basically between 5 cm -0.5 cm. The two corners of the carved figures are to be rounded off and rounded. Otherwise, when carving clothes or other dents, they will not only fail to move, but will also damage both sides of the dent. If you do embossing, you should keep the two corners of the knife edge, and use the function of its corner to sculpt the corners of the ground, so you need to have two kinds. There is also a round knife is the other hand, the slope in the groove, the knife back was straight mouth is a round knife, it eats wood is relatively deep, suitable for round carving, especially in the billet and dig stage. The incline is on the back of the blade, and the groove is straight as a round knife. It is more lively to eat wood, and can be used smoothly or to remove the ground. It is more useful in relief. The shape of the round knife can also be made into a bent shape of the iron rod according to need, so as to extend into a deeper part to dig a hole.
 
Flat knife: The cutting edge is straight and it is mainly used to cut the uneven surface of the shoveling timber to make it smooth and seamless. Large models can also be used to chisel large-scale, a sense of a sense of the block, the use of methods, such as the brushstrokes of the painting, appear vigorous and powerful, vivid and natural. The acute angle of the flat knife can be engraved and the knife or imprinting pattern can be removed when the two blades intersect. The woodcarving figures of Sweden and the Soviet Union used flat knives and had a strong taste of wood.
 
Oblique knife: The incision is about 45 degrees. It is mainly used for joint corners and hollow slits in the work to make the corners shine. If you engrave the corners of your eyes, the oblique knife is better. The knife also divides the forehand and backhand obliquely to suit all directions. In Shanghai's boxwood carvings, hair cuts are usually made using oblique knives. The knives are twisted and twisted. The engraved hair is more vivid and natural than the triangular knives.
 
Jade knife: commonly known as "monk head", "butterfly chisel", the edge of the arc-shaped, is between a round knife and flat knife between the light repair knife, sub-arc and oblique arc two kinds. They can be replaced when the flat knife and the round knife cannot be cast. The features are relatively gentle, not as straight as a flat knife, not as deep as a round knife, and suitable for use on concave undulations.
 
In the steel knife: Both sides of the blade have a straight slope. Also known as "knife." The traditional sculpture thinks that: in the middle of the middle of the steel blade, the blank can be kept straight forward by the blank, so that the surrounding part is not shaken. Chinese steel knives are also used to imprint figure designs on characters and props.
 
Triangle knife: The edge of the knife is triangular, because the front is on the left and right sides, and the sharp set point is on the middle corner. To manufacture triangular knives, use a suitable tool steel (usually 4-6 mm round steel), mill a 55-60 degree triangular groove, grind the two waists, and grind the ends of the triangles into cutting edges. The angle is large, the lines carved are thick, and vice versa. Triangle knife is mainly used to engrave hair decorative lines. It is also a kind of tool commonly used in printmaking and watermark woodcut art. When the operation is performed, the triangular blade tip advances on the wooden plate, and the wood chips are spit out from the triangular groove, and the triangular blade tip is pushed over the part. It will draw lines.

Hantek HT201 Oscilloscope Signal Attenuation 20:1 10MHz Bandwidth Passive Attenuator Osciloscopio Accessories
This item has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope product
Features:
Can allow oscilloscope to measure fuel injector and primary ignition waveforms.
Passive attenuator with 20:1 attenuation.
If input a 20V signal, it can output a 1V signal.
By using this item, oscilloscope can measure voltage higher than its range(*20V)
Specifications:
Attenuation: 20:1
Bandwidth: 10MHz
Input Resistance: 1.053M
Item Size: 60 * 18 * 16mm / 2.36 * 0.7 * 0.6in
Item Weight: 24g /0.85oz
Package List:
1 * Attenuator
Please note: this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.

Descriptions:
 
It has a capacity of about 1000g (1kg) 5000g (5kg), accuracy: 0.1g/1g.It weighs in oz, LB and g.And it very light, & nbsp; you can carry it to food market for accurately controlling your daily diet.Health and real-life.
Features:
1. High precision strain gauge sensor
2. Auto zero-auto off
3. Low battery/overload indication
4. Multi-unit ( Lb/oz/g ) display, press "Unit" button  to switch among oz, lb and g.
5. Tare function
6. 5Kg Weight Scale with high precision strain gauge sensor
7. All durable plastic construction is easy to clean and portable to store
8. Easy to read LCD display, L1.6 x W0.7" LCD screen
9. Light weight, mini size, easy to carry
Description:
Color: White
LCD display
Capacity: About 1000g (1kg) / 5000g (5kg).
Accuracy: 0.1oz / 1g
Unit Switch:  oz, lb and g.
Power Supply: 2 x 1.5V AAA battery( Not included)
Calibration is not required before first use. Only calibrate if the scale is not weighting properly.
Net weight: 260g
Dimension: 163mm x 128mm x 32mm (L x W x H)
Unit Package Weight: 280g
 
Package Contents:
1 * Electronic Kitchen Food Scale
1 * User manual
1 * tray(optional)