Tesztberendezés alkatrészei és tartozékai

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

Description:
Can be used in electronics or laboratory testing work
Easy for installation and safety for use with the insulation plastic boots covered
Application: Electric Testing Work
Material: Metal & Plastic
Length: Approx. 4.2cm/ 1.65in
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 2-3% measuring deviation due to manual measurement.

WEMOS Lite V1.0.0 Wifi Bluetooth Development Board Antenna ESP32 ESP-32 REV1 CH340G MicroPython 4MB Micro USB For Arduino
 
Power supply: 2.2V to 3.6V
Operating voltage: 3.3V
Logic level: 3.3V
Mounting holes diameter: 2 holes, 3mm diameter
Integrated 802.11 BGN WiFi transceiver
Integrated dual-mode Bluetooth
4MB Flash Memory
Maximum serial baud rate: 256000bps
Dimensions: 50mm x 25mm (1.97in x 0.98in)

Description:
 
Alligator Clip Length (without silicone cover): approx 28mm 
Housing: Insulating paste resin
Withstand voltage: 300V~5A
Connection: weldable wire
Small alligator clip: except the length of the rubber sleeve is 2.8CM, the width of the clip is 4MM
 crocodile clip thicken protective insulation sleeve
Rated current: 10A
The thickness of clip: about 0.5mm
Opening range of clip: 10mm
 
Specification:
This alligator crocodile clip is composed of ecological materials.
With thickening protective insulating sleeve; it will be safer and more convenient to use.
Mainly used in electrical circuits, automobiles and batteries projects; will be a better smart choice for electrical engineer and DIY enthusiast.
Note: Spring and rivet can not be pure copper.

Description:
 
Alligator Clip Length (without silicone cover): approx 28mm 
Housing: Insulating paste resin
Withstand voltage: 300V~5A
Connection: weldable wire
Small alligator clip: except the length of the rubber sleeve is 2.8CM, the width of the clip is 4MM
 crocodile clip thicken protective insulation sleeve
Rated current: 10A
The thickness of clip: about 0.5mm
Opening range of clip: 10mm
 
Specification:
This alligator crocodile clip is composed of ecological materials.
With thickening protective insulating sleeve; it will be safer and more convenient to use.
Mainly used in electrical circuits, automobiles and batteries projects; will be a better smart choice for electrical engineer and DIY enthusiast.
Note: Spring and rivet can not be pure copper.

Description:
 
Alligator Clip Length (without silicone cover): approx 28mm 
Housing: Insulating paste resin
Withstand voltage: 300V~5A
Connection: weldable wire
Small alligator clip: except the length of the rubber sleeve is 2.8CM, the width of the clip is 4MM
 crocodile clip thicken protective insulation sleeve
Rated current: 10A
The thickness of clip: about 0.5mm
Opening range of clip: 10mm
 
Specification:
This alligator crocodile clip is composed of ecological materials.
With thickening protective insulating sleeve; it will be safer and more convenient to use.
Mainly used in electrical circuits, automobiles and batteries projects; will be a better smart choice for electrical engineer and DIY enthusiast.
Note: Spring and rivet can not be pure copper.

Input voltage: AC110-220V Output voltage: DC5V/12V Output current: 100mA/500mA Output power: 0.5W/6W Product size: 35*25*15mm Pad pitch: input 15.24 / output 5.08 (mm) Power input connection: AC110V-220V Dual outputs, 5V and 12V, respectively, can be connected to the output voltage matching load. Note: distinguish between the positive and negative poles of the power supply (as shown in the connection diagram)

 
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

 
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

 
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

 
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

 
This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor.
The temperature and humidity of ESP8266 are uploaded to the server.
Support 3.7 v-12v DC supply (3.7 v lithium battery).
It can be used as a temperature and humidity collection node for smart home or IOT projects.
 
Data download: http://pan.baidu.com/s/1pLBL8b5
 
Features:
 
* main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s)
 
* temperature and humidity sensor: DHT11
 
* working voltage: DC 3.7 v-12v (support for 3.7V lithium battery)
 
* measurement range: 20-90% RH 0 to 50 °
 
* accuracy of measurement: temperature: plus or minus 2 ° humidity / - 5% RH

The power supply is a kind of high-efficiency voltage automatically regulator.
Whatever is the input voltage value,the output voltage can be maintained constant.
For example,set the output to 12V, then the variation of the input voltage in the range of 5-32V,
the output voltage in the 12V invariant.
This module has a perfect protection function, and can be widely used in notebook power,
vehicle power supply, solar charge etc..
Advantages:
The input uses replaceable fuse to protect power supply and equipment;
The whole electrolysis use patch, low resistance, high frequency capacitor
,to make the ripple down to the freezing point;
Constant voltage, constant current, under voltage protection (MPPT is more suitable for solar charging)
The output has error indicating lamp,it will light when the output voltage drift too serious,
short circuit and other fault;
Inductor use iron silicon aluminum, 0.8 double winding, generate less heat.
Parameters:
Input voltage: DC5-32V;
Output voltage: DC1V-30V continuously adjustable; the default 12V shipment
Output current: 10A (MAX) ,long term within 8A
Output power: 80W, peak 130W, more than 80W please strengthen heat dissipation
Output ripple: 50mV (12V turn to 12V, 5A measured)
Short circuit protection:YES
Input reverse connection protection: No
Output prevent reverse connection protection: No
Operating temperature range: -45 ~ 85 centigrade

Product model: XH-A901
 
Input voltage: DC12-24V
 
Number of channels: two channels
 
Size: 96*39*16MM
 
Installation aperture: 3MM
 
Installation hole distance: 89.3*32.3MM
Chip:Two NE5532 
 
Package include :
1pcs XH-A901 NE5532 Tone Board 
1pcs 3P Audio cable
 
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

HC-05
It's HC-05 Bluetooth module Slaveand master two in one module.
 
This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
 
Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.
Module working voltage 3.3 V.
Potter default rate of 9600, the user can be set up.
The core module size : 28 mm x 15 mm x 2.35 mm.
Working current: matching for 30 MA, matching the communication for 8 MA.
Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and Bluetooth adapter, PDA, seamless connection equipment
 
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-search" button(ON/OFF/WAKE foot for it , external MCU out/input "High level" can control module to re-search)
Compatible with Bluetooth master module "slave module" or master-slave(whole) module.
Input voltage: 3.3 -6V
Size: 1.55cm * 3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when Bluetooth "Unconnected", output "Pulse", when Bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board, No any "Bluetooth Function"
 
 
 
HC-06
This's HC-06 Bluetooth module.
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
 
Feature: 
Works with any USB Bluetooth adapters.
Default Baud Rate: 9600,8,1,n.
Built in antenna.
Coverage up to 30ft.
Bluetooth version: V2.0 EDR
Operating voltage: 3.3V
Default Baud Rate: 9600,8,1,n.
Signal coverage: 30ft
Cable length: 21.5cm
Item size: 4.3 * 1.6 * 0.7cm
Item weight: 3g
Package size: 9 * 3 * 1cm
Package weight: 8g
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module".slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
 
Note:
Input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function"
 
 

multi-channel transceiver @ 868MHz 
support FSK, GFSK, ASK / OOK and MSK 
  configurable data rate: 1.2k to 500kps 
independent 64-byte RX and TX data FIFOs 
support radio wake 
supports automatic clear channel assessment
efficient SPI Interface
low power supply (1.8V-3.6 V)  

 
ESP8266-12F is an enhanced version ESP8266-12, improve peripheral circuits, four plate board technology, enhanced impedance matching, the signal output is better, whether it is stable or anti-jamming capability, PCB antenna through specialized laboratory testing, a perfect match after ROHS certification, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added the ESP-12 on the basis of six IO ports, SPI mouth leads, develop more convenient, application more extensive!

 
ESP8266-12F is an enhanced version ESP8266-12, improve peripheral circuits, four plate board technology, enhanced impedance matching, the signal output is better, whether it is stable or anti-jamming capability, PCB antenna through specialized laboratory testing, a perfect match after ROHS certification, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added the ESP-12 on the basis of six IO ports, SPI mouth leads, develop more convenient, application more extensive!

Specification:
Brand new
Name: protection board
Size: approx. 60*23mm
Color: as picture shows
Charging voltage: 21 V
Charge MOS pressure value: 35 V
Discharge MOS pressure value: 35 V
Charging current: 56 A
Continuous discharge current: 15 A
Over current protection: 50/55/60 A
Over current protection delay: 20/25/30mS
Single section since the power consumption: 30uA
Single section between the power consumption: 3uA
Single section over charge detection voltage: 4.18- /4.22V
Over charge recovery voltage 4.05- 4.15 V
Over charge detection delay: 0.5/1.0/2.0S
Single section over discharge detection voltage: 2.75-2.85 V
Over discharge recovery voltage: 2.90-3.20 V
Over discharge detection delay: 0.5-2.0S
Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery
Short circuit protection delay 200/500/600uS
The normal working state of B- to P- resistance: 5mΩ
Continuous 15A current maximum temperature rise: 25 °
Working environment (humidity) relative humidity: ≥98% (long-term stability under the humidity)
Working environment (temperature) -30 ~ 80°(in the lower temperature range of long-term stability)
Note:
Please allow 1-5mm errors due to manual measurement
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same

Purple Board
Descriptions:
The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. 
The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system. This time-of-flight (TOF) measurement enables it to accurately determine the absolute distance to a target without the object's reflectance greatly influencing the measurement. The sensor can report distances of up to 2 m (6.6 ft) with 1 mm resolution, but its effective range and accuracy (noise) depend heavily on ambient conditions and target characteristics like reflectance and size, as well as the sensor configuration. (The sensor's accuracy is specified to range from ±3% at best to over ±10% in less optimal conditions.) 
Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output. 
The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible. 
  
PIN     Description 
VDD  Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)
 
VIN  This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I⊃2;C lines high to this level.
 
GND  The ground (0 V) connection for your power supply. Your I⊃2;C control source must also share a common ground with this board.
 
SDA    Level-shifted I⊃2;C data line: HIGH is VIN, LOW is 0 V
 
SCL      Level-shifted I⊃2;C clock line: HIGH is VIN, LOW is 0 V
 
XSHUT    This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted. 
 
 
 
Blue Board
Product Description
VL53L0 can be completed in a frame of the entire measurement operation, usually less than 30ms, the distance is less than 2 meters. This distance measurement allows the camera to focus instantly in both shooting and continuous shooting modes, maintaining the same performance even in low light or low contrast scenes, while for low-light or low-contrast scenes without a ToF Is a huge challenge. Thanks to its excellent ranging accuracy, the VL53L0 also boosts smartphone application performance, including dual-camera depth maps. The VL53L0 module of STMicroelectronics is easy to use (6 valid pins), provides an I2C interface, comes with a full set of API drivers and technical documentation to make system integration quick and easy. The module package supports reflow soldering process, RoHS compliance limits, fully compatible with a variety of glass cover and appearance
The VL53L0X extends the ToF ranging length to two meters with an accuracy of ± 3% . Measurement speed faster than the previous generation, ranging time less than 30ms; more energy efficient, normal mode of operation power consumption is only 20mW, standby power consumption is only 5μA. The sensor to complete the distance calculation within the I2C bus interface output data, thus the system's main controller needs to a minimum.
The internal laser emits 940nm wavelengths of non-visible light and does not harm the eyes. This eliminates the problem of reddistribution with other infrared proximity detection sensors and enhances the immunity to external light sources. The sensor's digital architecture and automatic compensation make it possible to achieve high ambient light levels.
VL53L0X sensing capabilities can support a variety of functions, including a variety of innovative user interface gesture sensing or proximity detection; sweeping robots and other appliances, wall detection, cliff detection, collision detection; sanitary products, such as: faucet, soap dispenser, Dry cell phones and irrigators; other targeted applications include laptop user presence detection or power switch monitors, unmanned aerial vehicles and IoT products.

Purple Board
Descriptions:
The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. 
The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system. This time-of-flight (TOF) measurement enables it to accurately determine the absolute distance to a target without the object's reflectance greatly influencing the measurement. The sensor can report distances of up to 2 m (6.6 ft) with 1 mm resolution, but its effective range and accuracy (noise) depend heavily on ambient conditions and target characteristics like reflectance and size, as well as the sensor configuration. (The sensor's accuracy is specified to range from ±3% at best to over ±10% in less optimal conditions.) 
Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output. 
The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible. 
  
PIN     Description 
VDD  Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)
 
VIN  This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I⊃2;C lines high to this level.
 
GND  The ground (0 V) connection for your power supply. Your I⊃2;C control source must also share a common ground with this board.
 
SDA    Level-shifted I⊃2;C data line: HIGH is VIN, LOW is 0 V
 
SCL      Level-shifted I⊃2;C clock line: HIGH is VIN, LOW is 0 V
 
XSHUT    This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted. 
 
 
 
Blue Board
Product Description
VL53L0 can be completed in a frame of the entire measurement operation, usually less than 30ms, the distance is less than 2 meters. This distance measurement allows the camera to focus instantly in both shooting and continuous shooting modes, maintaining the same performance even in low light or low contrast scenes, while for low-light or low-contrast scenes without a ToF Is a huge challenge. Thanks to its excellent ranging accuracy, the VL53L0 also boosts smartphone application performance, including dual-camera depth maps. The VL53L0 module of STMicroelectronics is easy to use (6 valid pins), provides an I2C interface, comes with a full set of API drivers and technical documentation to make system integration quick and easy. The module package supports reflow soldering process, RoHS compliance limits, fully compatible with a variety of glass cover and appearance
The VL53L0X extends the ToF ranging length to two meters with an accuracy of ± 3% . Measurement speed faster than the previous generation, ranging time less than 30ms; more energy efficient, normal mode of operation power consumption is only 20mW, standby power consumption is only 5μA. The sensor to complete the distance calculation within the I2C bus interface output data, thus the system's main controller needs to a minimum.
The internal laser emits 940nm wavelengths of non-visible light and does not harm the eyes. This eliminates the problem of reddistribution with other infrared proximity detection sensors and enhances the immunity to external light sources. The sensor's digital architecture and automatic compensation make it possible to achieve high ambient light levels.
VL53L0X sensing capabilities can support a variety of functions, including a variety of innovative user interface gesture sensing or proximity detection; sweeping robots and other appliances, wall detection, cliff detection, collision detection; sanitary products, such as: faucet, soap dispenser, Dry cell phones and irrigators; other targeted applications include laptop user presence detection or power switch monitors, unmanned aerial vehicles and IoT products.

Features:
 
 
 
With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current.
 
The efficiency can be up to 96% , measured at 20A, converting 24V to 12V.
 
It is designed with 75V/80A large current dual MOS tube.
 
Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
 
Wiring is convenient with these large current 30A screw terminals.
 
The buck module has 2 heat sink that could enhance heat dissipation.
 
When there is a big difference between input and output voltage, please decrease power and current.
 
 
 
 
Specifications:
 
 
 
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
 
Output Voltage: 1.2V to 36V DC
 
Output Current: 20A(max.), 15A(suggested)
 
Efficiency: 95% (24V to 12V, 20A)
 
Output Ripple: ≤50mV
 
Wiring Method: Terminal
 
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
 
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"
 
 
 
VO : Output positive
VO-: Output negative
IN: Input positive 
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current

MAX7219 dot matrix module microcontroller module 4 in one display
 
MAX7219 Display Panel Dot Matrix Module Microcontroller 4 In One Display with 5P Line 4 in 1 Red Green for Arduino diy kit
 
 
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X12.8X1.3cm/
Fixing screws with 64 holes with a diameter 3mm
Module with input and output interfaces, support for cascading multiple modules
Quality:1Set
The left side of the module to the input port, the right to an output port
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on...
51 microcontrollers, for example:
VCC 5V
GND GND
DIN P2.2
CS P2.1
CLK P2.0
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

MAX7219 dot matrix module microcontroller module 4 in one display
 
MAX7219 Display Panel Dot Matrix Module Microcontroller 4 In One Display with 5P Line 4 in 1 Red Green for Arduino diy kit
 
 
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X12.8X1.3cm/
Fixing screws with 64 holes with a diameter 3mm
Module with input and output interfaces, support for cascading multiple modules
Quality:1Set
The left side of the module to the input port, the right to an output port
When the control of a single module, simply input port connected to CPU
When a plurality of cascaded modules, input and output termination CPU, an input terminal of the second output end of the first module a module, the first two modules of the input terminal of the three termination modules, and so on...
51 microcontrollers, for example:
VCC 5V
GND GND
DIN P2.2
CS P2.1
CLK P2.0
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
 
 
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
 
ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
 
ESP01
SDIO 2.0, SPI, UART
32-pin QFN package
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated /baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Solutions
 
Supports APSD for optimal VoIP applications
Patented spurious noise cancellation algorithm for integration in SOC applications
Supports Bluetooth co-existence interface
Self-calibrated RF to ensure optimal performance under all operating conditions
Zero factory tuning
No external RF components
Specifications
 
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
 
 
 
1. High quality & low price
2. LWIP agreement
3. Support 3 modes: AP, STA, AP STA
4. Perfect and simple AT commands
 
 
 
Now for Arduino can get on WiFI without braking the bank.
Use this module for your next Interet of Things project, home automation, Or remote sensor project.
This module adats the ESP8226 IC for use over a serial connection using simple AT commands.
No SPI interface or Know-How is required.
 
Warnings:
This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will
destroy this module. You must use a logic level converter, or a 3.3V for Arduino
The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate,
higher 3.3V supply(about 300mA or better)
 
 
 
ESP-07
Model:ESP8266
ISM 2.4GHz
PA 25dBm
802.11b/g/n
Warnings:
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.  
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
3.You must use a logic level converter, or a 3.3V FOR Arduino
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module.
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
ESP-12F
ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive!
Standards Certification: FCC / CE / TELEC
Wireless standards: 802.11 b / g / n
Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M)
Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM
Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V)
Working Current: Average: 80mA
Operating temperature: -40 ° ~ 125 °
Storage temperature: Nomal temperature
 
 
 
 
ESP-12E
Model:ESP8266-12 
ISM 2.4GHz 
PA 25dBm 
802.11b/g/n
Warnings:
 
1.This module requires a 3.3 volt supply for VCC, and 3.3V logic.
 
2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module.
 
3.You must use a logic level converter, or a 3.3V FOR Arduino
 
4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this
module.
 
5.You must provide a separate,higher 3.3V supply(about 300mA or better)
 
 
 
 
 
 
 
 

Shipping list 10Pcs Rocker Switch position: 2 ON-OFF Size:10x15mm Color:Black,white,red(you can choice) Voltage:250V Current:3A

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

Momentary Off(on) switch (switch is only "on" when the button is held down)
Choice of 7 colours
Panel hole diameter: 11.25mm
Overall dimensions: 21 x 18mm (H x D)
Commonly used as vehicle horns, ignition switch and for doorbells
Rated Voltage: 1A 250VAC
Pack: 5Pcs

 

Notice: The new tracking number for China Post Ordinary Small Packet Plus can be traced only befor it arrive the airport of your country,please choose China Post Air Mail if you want a full tracking info.
 
Tracking info of  China Post Ordinary Small Packet Plus can be check here: www.17track.net/en

Notice: The new tracking number for China Post Ordinary Small Packet Plus can be traced only befor it arrive the airport of your country,please choose China Post Air Mail if you want a full tracking info.
 
Tracking info of  China Post Ordinary Small Packet Plus can be check here: www.17track.net/en