• -43%

Nincs szín - YX815 akkumulátor töltésvezérlő 6V-48V túltöltés elleni védelem Teljesen új

Nincs szín - YX815 akkumulátor töltésvezérlő 6V-48V túltöltés elleni védelem Teljesen új

581 Ft 43% megtakarítás
1 019 Ft
Nincs adó
YX815 Battery Charge Controller 6V-48V Over-discharge Protection Brand new
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
* The battery charge controller has adjustable parameters and power-off memory function.
* Control voltage is 5V-60V, accuracy is up to 0.1V.
* The battery charge controller is suitable for batteries, lithium batteries, etc.
* The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications:
* Model: YX815
* Control voltage: 5V-60V
* Control current: 20A
* Control accuracy: 0.1V
* Voltage error: ±0.1V
* Scope: battery, lithium battery, etc.
* Packing: anti-static bag
*Size: 7.9 x 4.3 x 2.8cm / 3.11 x 1.69 x 1.10inch(Approx.)
* Installation size: 76 x 39.5mm / 2.99 x 1.56 inches(Approx.)
Voltage Setting Method:
*In the setting state (digital tube flashing)
S1: Up-regulation voltage
S2: Down voltage
*S1 undervoltage setting button (charge start, load stop):
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start):
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset:
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note: When s1 cannot increase the voltage, first set s2, s2 can't lower the voltage, first set s1)
Package Contents:
1*Battery Charge Controller
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
YX815 Battery Charge Controller 6V-48V Over-discharge Protection Brand new
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
* The battery charge controller has adjustable parameters and power-off memory function.
* Control voltage is 5V-60V, accuracy is up to 0.1V.
* The battery charge controller is suitable for batteries, lithium batteries, etc.
* The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications:
* Model: YX815
* Control voltage: 5V-60V
* Control current: 20A
* Control accuracy: 0.1V
* Voltage error: ±0.1V
* Scope: battery, lithium battery, etc.
* Packing: anti-static bag
*Size: 7.9 x 4.3 x 2.8cm / 3.11 x 1.69 x 1.10inch(Approx.)
* Installation size: 76 x 39.5mm / 2.99 x 1.56 inches(Approx.)
Voltage Setting Method:
*In the setting state (digital tube flashing)
S1: Up-regulation voltage
S2: Down voltage
*S1 undervoltage setting button (charge start, load stop):
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start):
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset:
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note: When s1 cannot increase the voltage, first set s2, s2 can't lower the voltage, first set s1)
Package Contents:
1*Battery Charge Controller
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
143815386197 - shoppingelectricaleq (31)
143815386197

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - YX815 akkumulátor töltésvezérlő 6V-48V túltöltés elleni védelem Teljesen új

YX815 Battery Charge Controller 6V-48V Over-discharge Protection Brand new
Features:
* 100% brand new and high quality
* Made of high quality material, durable and practical to use
* When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
* The battery charge controller has adjustable parameters and power-off memory function.
* Control voltage is 5V-60V, accuracy is up to 0.1V.
* The battery charge controller is suitable for batteries, lithium batteries, etc.
* The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications:
* Model: YX815
* Control voltage: 5V-60V
* Control current: 20A
* Control accuracy: 0.1V
* Voltage error: ±0.1V
* Scope: battery, lithium battery, etc.
* Packing: anti-static bag
*Size: 7.9 x 4.3 x 2.8cm / 3.11 x 1.69 x 1.10inch(Approx.)
* Installation size: 76 x 39.5mm / 2.99 x 1.56 inches(Approx.)
Voltage Setting Method:
*In the setting state (digital tube flashing)
S1: Up-regulation voltage
S2: Down voltage
*S1 undervoltage setting button (charge start, load stop):
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start):
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset:
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note: When s1 cannot increase the voltage, first set s2, s2 can't lower the voltage, first set s1)
Package Contents:
1*Battery Charge Controller
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.

Write your review