A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
Step-down module Current D3806 Supply Step-Down Voltmeter Module Useful
Features:
100% brand new and high quality
DPS 3806DC-DC digital control step-up/step-down module is a digital control and digital display step-down module, which has the characteristics of small size, high power and high efficiency.
The feature of this product is whether the input voltage is greater than or equal to or less than or equal to the output voltage, which can ensure the stability of the output voltage.
It is controlled by a high-speed microcontroller, which can accurately adjust the output voltage and current. It has 10 sets of storage locations, which can store and recall parameters at any time.
It is equipped with four of the eight cycle LED digital tubes, which can display voltage, current, power, capacity and other parameters in real time.
At the same time, the machine will automatically output after power on, automatically display parameters and other functions, which can be turned on or off as needed.
Digital display, convenient and easy to use.
Constant voltage and constant current state.
OUT, CV and CC indicator lights.
Accurately adjust the output voltage and current value.
Automatic/manual switch voltage, current, power, capacity and other parameters display.
After power on, you can set whether to automatically output.
You can set whether to display voltage, current, power and capacity in turn after output.
10 sets of storage locations, free storage and recall
One key to save voltage and current values
Product parameters:
Type: CNC DC constant current power supply
Model: D3806
Size: 100x80x29mm
Weight: 146g
Technical parameter:
Input voltage: 10V~40V
Input current: 0~8A
Output voltage: 0~38V
Output current: 0~6A
Voltage adjustment/display resolution: 0.01 V
Current adjustment/display resolution: 0.001A
Minimum display resolution: 0.001 W
Minimum display resolution capacity: 0.001AH
Conversion efficiency: up to 80%
Output ripple: ≤50 mV
Working temperature: -40degree Celsius~ 85degree Celsius
Working frequency: 150 KHz
Short circuit protection: constant current
Input reverse connection protection: No, if necessary, please install a diode
Connection method: terminal
Display:
00.00: Voltage value, 00.00~38.00 V
0.000: current value, 0.000~6.000A
P.000, P0.00, P00.0, P000.: power value, unit W, decimal point position as the power to change position. For example: P. 123 means 0.123 W, P1.23 means 1.23 W, P12.3 means 12.3 W, P102. Say 102 W
C.000, C0.00, C00.0 and C000.: capacity value, unit AH, the position of the decimal point change with volume. For example: C.123 means 0.123AH, C1.23 means 1.23AH, C12.3 means 12.3 AH, C123. Say 123AH
--0-,-1-,-2-: Special function 0, 1, 2
--y-: turn on special functions
--n-: Turn off special functions
SA. -*(*:0~9): Save parameters to storage location 0~9
-*(*:0~9): recall parameters from storage location 0~9
----: Save voltage and current values
Note:
Correctly connect the input and output, and reverse connection is prohibited, otherwise it will burn out.
This module is a step-down module, and the input voltage needs to exceed the output voltage by more than 1.5V.
When the output is below 2A, it will be cooled naturally, and the output above 2 should be strengthened.
Package Included:
1*D3806 CNC DC constant current power supply step-down module
1*User Manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
402549535171 - shoppingelectricaleq (31)