• -44%

Nincs szín - 500KV nagyfeszültségű impulzusgenerátor szuper ív impulzus gyújtótekercs modul 5CM

Nincs szín - 500KV nagyfeszültségű impulzusgenerátor szuper ív impulzus gyújtótekercs modul 5CM

452 Ft 44% megtakarítás
807 Ft
Nincs adó
Features:
This module is the finished module of high voltage inverter, transformer in Little science.
Input DC 6v-12v voltage can generate tens of thousands DC high voltage on the output end.
It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.
The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.
Specifications:
1.Model:MCF-12-2
2.Size:Approx. 71 x 40 x 22mm/2.80 x 1.57 x 0.87 inch
3.Input Voltage:6-12V
4.Input Current:0.5A-1A
5.Input Wire Length:26cm/1.02inch
6.High Voltage Type:DC
7.Output Voltage:500kV
8.Output Current:0.5A-1A
9.Output Wire Length:48cm
10.High Voltage Polarization Discharge Distance:1.5-2cm
11.Input Power: nickel-cadmium battery, 6V or 12V lead acid battery(12V battery can achieve best results)
Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(Distance between 1~4 cm is ok). Otherwise, energy can not be released due to high voltage, easily damaged modules.
3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.
Package Included:
1 x High Voltage Pulse Generator
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején szereplő szín/minta/méret/típus kerül kiszállításra!
500KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module 5CM
Features:
This module is the finished module of high voltage inverter, transformer in Little science.
Input DC 6v-12v voltage can generate tens of thousands DC high voltage on the output end.
It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.
The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.
Specifications:
1.Model:MCF-12-2
2.Size:Approx. 71 x 40 x 22mm/2.80 x 1.57 x 0.87 inch
3.Input Voltage:6-12V
4.Input Current:0.5A-1A
5.Input Wire Length:26cm/1.02inch
6.High Voltage Type:DC
7.Output Voltage:500kV
8.Output Current:0.5A-1A
9.Output Wire Length:48cm
10.High Voltage Polarization Discharge Distance:1.5-2cm
11.Input Power: nickel-cadmium battery, 6V or 12V lead acid battery(12V battery can achieve best results)
Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(Distance between 1~4 cm is ok). Otherwise, energy can not be released due to high voltage, easily damaged modules.
3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.
Package Included:
1 x High Voltage Pulse Generator
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }
274557030044 - globes (17)
274557030044

Hasonló kategóriák mint 16 :

Reviews

Write your review

Nincs szín - 500KV nagyfeszültségű impulzusgenerátor szuper ív impulzus gyújtótekercs modul 5CM

Features:
This module is the finished module of high voltage inverter, transformer in Little science.
Input DC 6v-12v voltage can generate tens of thousands DC high voltage on the output end.
It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.
According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.
The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.
Specifications:
1.Model:MCF-12-2
2.Size:Approx. 71 x 40 x 22mm/2.80 x 1.57 x 0.87 inch
3.Input Voltage:6-12V
4.Input Current:0.5A-1A
5.Input Wire Length:26cm/1.02inch
6.High Voltage Type:DC
7.Output Voltage:500kV
8.Output Current:0.5A-1A
9.Output Wire Length:48cm
10.High Voltage Polarization Discharge Distance:1.5-2cm
11.Input Power: nickel-cadmium battery, 6V or 12V lead acid battery(12V battery can achieve best results)
Module Usage Precautions:
1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity.
2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(Distance between 1~4 cm is ok). Otherwise, energy can not be released due to high voltage, easily damaged modules.
3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time.
4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state.
5. Small capacity series lithium battery is 7.2 V, voltage will drop to about 4V when arcing, the smaller the capacity, the lower the voltage will become. It is recommended to use above 2000MA lithium, it is better to choose above 4000MA battery.
Package Included:
1 x High Voltage Pulse Generator
.wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }

Write your review