DC12V 1 másodperc - 99 perc Dinamikus LED kijelző Visszaszámlálás Trigger Időzítés Időzítő Késleltetés Kikapcsolás időrelé kapcsoló modul
DC12V 1 seconds - 99 minutes Dynamic LED Display Countdown Trigger Timing Timer Delay Turn OFF Time Relay Switch Module
 
 
12V 1 seconds - 99 minutes Dynamic LED Display Countdown Trigger Timing Timer Delay Turn OFF Time Relay Switch Module
 
 
Description
1.Press the key to trigger, trigger immediate start action and delay. (if the key is connected to the power before it is short, then the power will be switched on and a set time delay)
2.Display: adjust the time to display the set time; the delay process, dynamic display countdown.
3.After the trigger, the load is switched on, and the load is disconnected after the specified time.
4.In the process of delay, the button operation immediately stops the delay and returns to the initial state.
5.Delay in the process of digital tube to reduce the brightness, and the time delay of the countdown, real-time display of the remaining time.
6.The adjustable resistor to set the time, adjustable range: 1 to 99,
the jumper can choose units,
jumper in seconds, tuning range 1-99 seconds,
jumper in minutes, adjusting range 1-99 minutes.
 
Specification
1.Module input power: DC 12V (Suitable DC 10V-16V) ,
2.The Module input voltage is 12V, and the output voltage is 12V
3.Load power=Input power = Ouput power
4.Standby current: 4.5mA
5.Pull current : 40mA (without load)
6.Delay time accuracy: 1 (units of minutes or seconds)
7.Unit of time: by jumper, can be set minutes or seconds
8.Range of time: 1-99(1-99 seconds,1-99 minutes)adjustable
9.Timing error: /- 2%
10.Module size: 66mm * 32mm (height <18mm)
 
Package Included
1 Pcs 12V LED Display DC-DC Trigger Delay Off Relay Module
 
4000103839177. - yikesu