• -25%

SPI BIOS FLASH ingyenes kioldási teszt égési klip SOP8 24C 93C 25LF 24C 93C 25

SPI BIOS FLASH ingyenes kioldási teszt égési klip SOP8 24C 93C 25LF 24C 93C 25

576 Ft 25% megtakarítás
768 Ft
Nincs adó
SPI BIOS FLASH Free Release Test Burn Clip SOP8 24C 93C 25LF at 24C 93C 25
Description:
Chip pitch 1.27mm
1. Single burner (not wired)
Suitable for
3.9mm wide (such as patch AT24C08)
5.3mm wide (such as patch W25Q64)
Buy before the need to know:Some boards can be directly clamped chip, but some boards can not do this, because the chip on the board will be affected by the external circuit, please know before you shoot, so buy it back can not be used, but the chip is quite a common seat The same can be used directly, and wide body, narrow body are common
When encounter with a protected function of the programmer, the clip in the normal voltage is not read out, this time need to add a 3.3V voltage, the method is: clip clip chip, chip 8 feet corresponding The clamp is supplied with a voltage of 3.3V. 3.3V power supply in general there are two lines, then the VCC corresponding to the clip, another line can be a direct grounding
Package included:
1 Set Test Clip
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

SPI BIOS FLASH Free Release Test Burn Clip SOP8 24C 93C 25LF at 24C 93C 25
Description:
Chip pitch 1.27mm
1. Single burner (not wired)
Suitable for
3.9mm wide (such as patch AT24C08)
5.3mm wide (such as patch W25Q64)
Buy before the need to know:Some boards can be directly clamped chip, but some boards can not do this, because the chip on the board will be affected by the external circuit, please know before you shoot, so buy it back can not be used, but the chip is quite a common seat The same can be used directly, and wide body, narrow body are common
When encounter with a protected function of the programmer, the clip in the normal voltage is not read out, this time need to add a 3.3V voltage, the method is: clip clip chip, chip 8 feet corresponding The clamp is supplied with a voltage of 3.3V. 3.3V power supply in general there are two lines, then the VCC corresponding to the clip, another line can be a direct grounding
Package included:
1 Set Test Clip
32831130228. - yikesu
32831130228.

Hasonló kategóriák mint 16 :

Reviews

Write your review

SPI BIOS FLASH ingyenes kioldási teszt égési klip SOP8 24C 93C 25LF 24C 93C 25

SPI BIOS FLASH Free Release Test Burn Clip SOP8 24C 93C 25LF at 24C 93C 25
Description:
Chip pitch 1.27mm
1. Single burner (not wired)
Suitable for
3.9mm wide (such as patch AT24C08)
5.3mm wide (such as patch W25Q64)
Buy before the need to know:Some boards can be directly clamped chip, but some boards can not do this, because the chip on the board will be affected by the external circuit, please know before you shoot, so buy it back can not be used, but the chip is quite a common seat The same can be used directly, and wide body, narrow body are common
When encounter with a protected function of the programmer, the clip in the normal voltage is not read out, this time need to add a 3.3V voltage, the method is: clip clip chip, chip 8 feet corresponding The clamp is supplied with a voltage of 3.3V. 3.3V power supply in general there are two lines, then the VCC corresponding to the clip, another line can be a direct grounding
Package included:
1 Set Test Clip

Write your review