• -43%

JDY-62 mini antenna BLE Bluetooth sztereó audio kétcsatornás magas, alacsony szintű alaplapi modul Uno-hoz IOS Automatihoz

JDY-62 mini antenna BLE Bluetooth sztereó audio kétcsatornás magas, alacsony szintű alaplapi modul Uno-hoz IOS Automatihoz

238 Ft 43% megtakarítás
417 Ft
Nincs adó
 
JDY-62 Mini Antenna BLE Bluetooth Stereo Audio Dual Two Channel High Low Level Board Module for Uno for IOS Automatic Sleep
 

 
Description:
VCC: voltage range 4.2V to 5V, in particular, can not exceed 5V power supply
GND: Power
L: Left channel output
R: Right channel output
MUTE: high level when muted, normally low
KC: Empty Pin
 
The Bluetooth audio module requires very high power, otherwise it will affect the audio quality. The power supply must be provided if the LC filter circuit, especially the switching power supply.
 
Module size
PCB : 25*15.5*2.4MM
Pin pitch: 2.54MM
 
common problem:
1, search less than blue:
Generally caused by power interference, the power line must be coupled with the LC filter circuit.
2, whether to support 3.7V power supply:
The module is powered by 5V by default. You can replace the diode on the JDY-62 module with the 0805 OR resistance, or use a wire to short circuit, so that you can use a lithium battery
3, Bluetooth signal is too weak
Do not route or cover copper under the antenna of the Bluetooth module. There must be no metal shielding around the antenna.
4, the current sound is too loud
Generally caused by the power supply interface interference, it is recommended that the power amplifier wiring is not too long, the Bluetooth port and the power port are separated.
 
Package included:
1 Pcs JDY-62 Mini Antenna BLE Bluetooth Module
 
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

JDY-62 mini antenna BLE Bluetooth sztereó audio kétcsatornás magas, alacsony szintű alaplapi modul Uno-hoz IOS Automatihoz
JDY-62 Mini Antenna BLE Bluetooth Stereo Audio Dual Two Channel High Low Level Board Module For Uno For IOS Automati
 
JDY-62 Mini Antenna BLE Bluetooth Stereo Audio Dual Two Channel High Low Level Board Module for Uno for IOS Automatic Sleep
 

 
Description:
VCC: voltage range 4.2V to 5V, in particular, can not exceed 5V power supply
GND: Power
L: Left channel output
R: Right channel output
MUTE: high level when muted, normally low
KC: Empty Pin
 
The Bluetooth audio module requires very high power, otherwise it will affect the audio quality. The power supply must be provided if the LC filter circuit, especially the switching power supply.
 
Module size
PCB : 25*15.5*2.4MM
Pin pitch: 2.54MM
 
common problem:
1, search less than blue:
Generally caused by power interference, the power line must be coupled with the LC filter circuit.
2, whether to support 3.7V power supply:
The module is powered by 5V by default. You can replace the diode on the JDY-62 module with the 0805 OR resistance, or use a wire to short circuit, so that you can use a lithium battery
3, Bluetooth signal is too weak
Do not route or cover copper under the antenna of the Bluetooth module. There must be no metal shielding around the antenna.
4, the current sound is too loud
Generally caused by the power supply interface interference, it is recommended that the power amplifier wiring is not too long, the Bluetooth port and the power port are separated.
 
Package included:
1 Pcs JDY-62 Mini Antenna BLE Bluetooth Module
 
32920722674. - yikesu
32920722674.

Hasonló kategóriák mint 16 :

Reviews

Write your review

JDY-62 mini antenna BLE Bluetooth sztereó audio kétcsatornás magas, alacsony szintű alaplapi modul Uno-hoz IOS Automatihoz

 
JDY-62 Mini Antenna BLE Bluetooth Stereo Audio Dual Two Channel High Low Level Board Module for Uno for IOS Automatic Sleep
 

 
Description:
VCC: voltage range 4.2V to 5V, in particular, can not exceed 5V power supply
GND: Power
L: Left channel output
R: Right channel output
MUTE: high level when muted, normally low
KC: Empty Pin
 
The Bluetooth audio module requires very high power, otherwise it will affect the audio quality. The power supply must be provided if the LC filter circuit, especially the switching power supply.
 
Module size
PCB : 25*15.5*2.4MM
Pin pitch: 2.54MM
 
common problem:
1, search less than blue:
Generally caused by power interference, the power line must be coupled with the LC filter circuit.
2, whether to support 3.7V power supply:
The module is powered by 5V by default. You can replace the diode on the JDY-62 module with the 0805 OR resistance, or use a wire to short circuit, so that you can use a lithium battery
3, Bluetooth signal is too weak
Do not route or cover copper under the antenna of the Bluetooth module. There must be no metal shielding around the antenna.
4, the current sound is too loud
Generally caused by the power supply interface interference, it is recommended that the power amplifier wiring is not too long, the Bluetooth port and the power port are separated.
 
Package included:
1 Pcs JDY-62 Mini Antenna BLE Bluetooth Module
 

Write your review