Mini nagy pontosságú digitális kijelző vastagságmérő 0-12,7 mm zseb digitális tolómérő mm/inch Műanyag tokkal kapcsolható egység
Mini High-precision Digital Display Thickness Gauge 0-12.7mm Pocket Digital Caliper mm/inch Unit Switchable with Plastic Case
Specification:
Power supply: 1.5v button battery(not included in the order)
Working temperature: 0-40℃
Resolution: Percentage: 0.01mm/0.0005’
Range: 0-12.7mm/.5'', 0-25.4mm/1''
Packing: plastic box (125*81*31mm) battery not included
Instructions:
1.Wipe the upper and lower measuring heads clean
2.Press the switch button, turn on the power, and check if the display is normal
3.When the upper and lower measuring heads are closed, check if the display on zero, if not, press the zero key to zero.
4.Press down the control rod to make the upper probe a sufficient distance from the lower probe, place the workpiece to be measured on the lower probe and then loosen the control rod, press the upper probe tightly on the workpiece, and then take a reading
5.When it is required to display in a different format, press the mm/in key to select.
Tips:
1. The thickness gauge is a precision tool, so it should be prevented from impact and falling during use to avoid loss of accuracy.
2. Keep it clean and avoid liquid substances such as water from penetrating into the thickness gauge to avoid affecting normal use.
3. No voltage can be applied to any part of the thickness gauge, and do not use pen lettering to avoid damage to electronic appliances,
4. When not in use for a long time, the battery should be removed.
1005003221755035 - wl_xv