- -41%
10db Tp4056 Micro - 10db/tétel MT3608 DC-DC Step Up Converter Booster tápegység modul Boost Step-up kártya MAX kimenet 28V
10db Tp4056 Micro - 10db/tétel MT3608 DC-DC Step Up Converter Booster tápegység modul Boost Step-up kártya MAX kimenet 28V
267 Ft
41% megtakarítás
453 Ft
Nincs adó
MT3608:
1.Electrical characteristics
1). The maximum output current: 2 a
2). The input voltage: 2 v ~ 24 v
3). The maximum output voltage: 28 v
4). Efficiency: ＞93%
2.Mechanical properties
1). product size: 36 mm X 17 mm X 14 mm
3.Method of use
The module of the IN and - after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage
4.Matters needing attention
1). The input voltage should not exceed the maximum input voltage
2). The peak current output current is no more than TV university
When the module to adjust the output voltage may not always match the input voltage, please counterclockwise the potentiometer for more than 20 laps, and then use the module may be normal to adjust the voltage. Method of regulation: potentiometer on the front side of the chest, reverse clock amplifier!
18650 Micro:
Charge module- Linear charging.
Current- 1A adjustable.
Charge precision- 1.5% .
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging Green is full charged.
Input interface- micro USB.
Work temperature- -10° to 85°.
Inversed polarity- NO.
Size- small to 25X19X10mm.
NOTE:
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity.
1.Electrical characteristics
1). The maximum output current: 2 a
2). The input voltage: 2 v ~ 24 v
3). The maximum output voltage: 28 v
4). Efficiency: ＞93%
2.Mechanical properties
1). product size: 36 mm X 17 mm X 14 mm
3.Method of use
The module of the IN and - after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage
4.Matters needing attention
1). The input voltage should not exceed the maximum input voltage
2). The peak current output current is no more than TV university
When the module to adjust the output voltage may not always match the input voltage, please counterclockwise the potentiometer for more than 20 laps, and then use the module may be normal to adjust the voltage. Method of regulation: potentiometer on the front side of the chest, reverse clock amplifier!
18650 Micro:
Charge module- Linear charging.
Current- 1A adjustable.
Charge precision- 1.5% .
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging Green is full charged.
Input interface- micro USB.
Work temperature- -10° to 85°.
Inversed polarity- NO.
Size- small to 25X19X10mm.
NOTE:
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
6. NO Reveral polarity.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
