- -43%
Szín: kék - 2021 HOT M726AT kábeltesztelő LAN USB RJ45 RJ11/RJ12 hálózati Ethernet CAT5 UTP Multi-Modular PC
Szín: kék - 2021 HOT M726AT kábeltesztelő LAN USB RJ45 RJ11/RJ12 hálózati Ethernet CAT5 UTP Multi-Modular PC
458 Ft
43% megtakarítás
803 Ft
Nincs adó
,
Features:
1. Test one by one: test the twisted pair 1, 2, 3, 4, 5, 6, 7, 8, and G wire pairs one by one (pair), and can distinguish which one (right) is wrong and short-circuited and open the way.
2. Test object: The LAN/USB cable tester can test cable as follow: USB(A/A), USB(A/B) and RJ11, RJ45 modular cable.
3. Switch use: Toggle the switch to TEST, and the test restarts from 1 light. Enter the manual jog cycle, press "TEST" to step one light, and so on.
4. Connecting cable: You can use connect cable if you want to test BNC, Coaxial, RCA modular cables, if you want to test cable installed far away either on patch panel or wall plate which can use the Remote terminator.
5. Indicator light: Turn on the power and the POWER red light is on, flip the switch to AUTO for automatic test, AUTO green light is flashing, plug the network cable into the main tester and remote tester respectively, and the host indicator lights flash sequentially from 1 to G bright.
Description:
The LAN/USB cable tester tests RJ11 cable please use the appropriate adapors and follow the above procedure, so you can use it very easy and correct.
Specifications:
Size: 130*65*28mm
Display: LED indicator
Test cable: RJ11, RJ45
Power supply: 9V battery
Power consumption: 25MA
Package Included:
1 pc * Cable tester
Notes:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.
Features:
1. Test one by one: test the twisted pair 1, 2, 3, 4, 5, 6, 7, 8, and G wire pairs one by one (pair), and can distinguish which one (right) is wrong and short-circuited and open the way.
2. Test object: The LAN/USB cable tester can test cable as follow: USB(A/A), USB(A/B) and RJ11, RJ45 modular cable.
3. Switch use: Toggle the switch to TEST, and the test restarts from 1 light. Enter the manual jog cycle, press "TEST" to step one light, and so on.
4. Connecting cable: You can use connect cable if you want to test BNC, Coaxial, RCA modular cables, if you want to test cable installed far away either on patch panel or wall plate which can use the Remote terminator.
5. Indicator light: Turn on the power and the POWER red light is on, flip the switch to AUTO for automatic test, AUTO green light is flashing, plug the network cable into the main tester and remote tester respectively, and the host indicator lights flash sequentially from 1 to G bright.
Description:
The LAN/USB cable tester tests RJ11 cable please use the appropriate adapors and follow the above procedure, so you can use it very easy and correct.
Specifications:
Size: 130*65*28mm
Display: LED indicator
Test cable: RJ11, RJ45
Power supply: 9V battery
Power consumption: 25MA
Package Included:
1 pc * Cable tester
Notes:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
