- -43%
Monster Moto Shield VNH2SP30 léptetőmotor meghajtó modul nagy áramerősség 30A
Monster Moto Shield VNH2SP30 léptetőmotor meghajtó modul nagy áramerősség 30A
1 677 Ft
43% megtakarítás
2 942 Ft
Nincs adó
The same product will arrive in 15 to 60 days
Tracking info of China Post Ordinary Small Packet Plus can be check here:www.17track.net/en
Monster Moto Shield
Description: This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we\'ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We\'ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
Note: When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.cjmcu
Features:
Voltage max: 16V
Maximum current rating: 30 A
Practical Continuous Current: 14 A
Current sensing available analog pin
MOSFET on-resistance: 19 m (per leg)
Maximum PWM frequency: 20 kHz
Thermal Shutdown
Undervoltage and Overvoltage shutdown
Tracking info of China Post Ordinary Small Packet Plus can be check here:www.17track.net/en
Monster Moto Shield
Description: This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we\'ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We\'ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
Note: When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.cjmcu
Features:
Voltage max: 16V
Maximum current rating: 30 A
Practical Continuous Current: 14 A
Current sensing available analog pin
MOSFET on-resistance: 19 m (per leg)
Maximum PWM frequency: 20 kHz
Thermal Shutdown
Undervoltage and Overvoltage shutdown
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
