• -43%

1 db optikai érzékelő kézmozdulat APDS-9930 közelségérzékelő modul az Arduino APDS 9930 barkácskészlethez,

1 db optikai érzékelő kézmozdulat APDS-9930 közelségérzékelő modul az Arduino APDS 9930 barkácskészlethez,

91 Ft 43% megtakarítás
160 Ft
Nincs adó
Product Description
 
CJMCU- proximity detection and non-contact gesture Gesture Sensor APDS-9930
 
APDS-9930 provides I2C compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with an infrared LED, where ambient light sensor using a dual LED approximated 0.01 lux illumination at low lumen human visual response performance, high sensitivity provided by such devices can operate in the dark glass. The proximity sensor can be fully adjusted 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements. From bright sunlight to dark rooms, proximity detection feature can work well. Micro-optic lens module was added to provide infrared energy efficient transmission and reception, can reduce overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
 
Features [-]
 
• Integrated ALS, an infrared LED and a proximity detector optical module
 • the ambient brightness sensing (ALS, Ambient Light Sensing)? Approximate the human visual response
 ? With programmable upper and lower threshold interrupt function
 ? Up to 16-bit resolution
 ? High sensitivity operation after dark glass
 ? 0.01lux low lumen performance
 
• proximity detector? Fully calibrated to 100 mm Detection
 ? Integrated IR LED and synchronization LED Driver
 ? Exclusion proximity sensor factory calibration
 
• Programmable wait timer standby power consumption -? 90μA typ.
 ? Programmable from 2.7 ms to more than 8 seconds
 
• I2C interface compatible? Up to 400kHz (I2C fast mode)
 ? Specific interrupt pins
 
• Sleep mode power - 2.2μA typ
 • Small package 3.94 (length) x 2.36 (width) x 1.35 (H) mm
 
application
 
• dimmable mobile phone backlight
 • You can disable the touch screen mobile phone
 • Notebook / Monitor Safety
 • speakerphone mode is automatically enabled
 • Automatic pop-up menu
 • Digital Camera Eye Sensor
.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

1 db optikai érzékelő kézmozdulat APDS-9930 közelségérzékelő modul az Arduino APDS 9930 barkácskészlethez, elektronikus nyomtatott áramköri modulhoz
1PCS Optical Sensor Gesture APDS-9930 Proximity Sensor Module For Arduino APDS 9930 Diy Kit Electronic PCB Board Module
Product Description
 
CJMCU- proximity detection and non-contact gesture Gesture Sensor APDS-9930
 
APDS-9930 provides I2C compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with an infrared LED, where ambient light sensor using a dual LED approximated 0.01 lux illumination at low lumen human visual response performance, high sensitivity provided by such devices can operate in the dark glass. The proximity sensor can be fully adjusted 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements. From bright sunlight to dark rooms, proximity detection feature can work well. Micro-optic lens module was added to provide infrared energy efficient transmission and reception, can reduce overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
 
Features [-]
 
• Integrated ALS, an infrared LED and a proximity detector optical module
 • the ambient brightness sensing (ALS, Ambient Light Sensing)? Approximate the human visual response
 ? With programmable upper and lower threshold interrupt function
 ? Up to 16-bit resolution
 ? High sensitivity operation after dark glass
 ? 0.01lux low lumen performance
 
• proximity detector? Fully calibrated to 100 mm Detection
 ? Integrated IR LED and synchronization LED Driver
 ? Exclusion proximity sensor factory calibration
 
• Programmable wait timer standby power consumption -? 90μA typ.
 ? Programmable from 2.7 ms to more than 8 seconds
 
• I2C interface compatible? Up to 400kHz (I2C fast mode)
 ? Specific interrupt pins
 
• Sleep mode power - 2.2μA typ
 • Small package 3.94 (length) x 2.36 (width) x 1.35 (H) mm
 
application
 
• dimmable mobile phone backlight
 • You can disable the touch screen mobile phone
 • Notebook / Monitor Safety
 • speakerphone mode is automatically enabled
 • Automatic pop-up menu
 • Digital Camera Eye Sensor
.
32677265486 - supersel
32677265486

Hasonló kategóriák mint 16 :

Reviews

Write your review

1 db optikai érzékelő kézmozdulat APDS-9930 közelségérzékelő modul az Arduino APDS 9930 barkácskészlethez,

Product Description
 
CJMCU- proximity detection and non-contact gesture Gesture Sensor APDS-9930
 
APDS-9930 provides I2C compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with an infrared LED, where ambient light sensor using a dual LED approximated 0.01 lux illumination at low lumen human visual response performance, high sensitivity provided by such devices can operate in the dark glass. The proximity sensor can be fully adjusted 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements. From bright sunlight to dark rooms, proximity detection feature can work well. Micro-optic lens module was added to provide infrared energy efficient transmission and reception, can reduce overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
 
Features [-]
 
• Integrated ALS, an infrared LED and a proximity detector optical module
 • the ambient brightness sensing (ALS, Ambient Light Sensing)? Approximate the human visual response
 ? With programmable upper and lower threshold interrupt function
 ? Up to 16-bit resolution
 ? High sensitivity operation after dark glass
 ? 0.01lux low lumen performance
 
• proximity detector? Fully calibrated to 100 mm Detection
 ? Integrated IR LED and synchronization LED Driver
 ? Exclusion proximity sensor factory calibration
 
• Programmable wait timer standby power consumption -? 90μA typ.
 ? Programmable from 2.7 ms to more than 8 seconds
 
• I2C interface compatible? Up to 400kHz (I2C fast mode)
 ? Specific interrupt pins
 
• Sleep mode power - 2.2μA typ
 • Small package 3.94 (length) x 2.36 (width) x 1.35 (H) mm
 
application
 
• dimmable mobile phone backlight
 • You can disable the touch screen mobile phone
 • Notebook / Monitor Safety
 • speakerphone mode is automatically enabled
 • Automatic pop-up menu
 • Digital Camera Eye Sensor
.

Write your review