3 sorozat 11,1 V 12 V 12,6 V lítium akkumulátor védőlemez 10 A áramkorlátozó
3 series 11.1v 12V 12.6v lithium battery protection plate 10A current limiting
Note:
 
This protection plate can not be used for iron polymer battery, hand electric drill battery pack, electric fish electromechanical pool group, electric bicycle battery pack, 2 pieces of series 24V use, 775(4A) above motor, 1W fisheye LED lamp, for the above combination purchase customers please pay attention! .
 
 
 
 
 
The power range described is suitable for the following products:
 
Massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack, monitoring backup power supply, and other products.
 
Note: the discharge rate of the battery should be above 3C for products with 3A current or above.
 
Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH*1=2A upper working current.
 
3C battery, 2000 capacity is equal to 2AH*3=6A upper working current.
 
 
 
In use, the battery will heat up is the battery multiplier is not applicable, this situation must not be used for a long time, the battery will soon be damaged.
 
 
 
 
 
 
 
 
 
Note 1: Wiring 0V (B-), 3.7V (B1), 7.4V (B2), 11.1V (B ) strictly according to the diagram, do not intentionally short circuit!
 
Note 2: After the cable is connected, it needs to be charged before output.
 
Note 3: When three groups of batteries are connected in series, ensure that the voltage of each group of batteries is the same. If not, fill each group of batteries separately before connecting them in series. The voltage drops during the discharge test. The fast battery is the bad battery.
 
 
 
 
 
For some of the poor electronic foundation of the customer: do not put good battery and bad battery mixed together to use! The capacity/internal resistance of 3 batteries is as close as possible! (2 good batteries 1 bad batteries =3 bad batteries)
 
 
 
The properties of the lithium battery protection plate:
 
Model: HX-3S-FL10-A Overcharge voltage range: 4.25-4.35V ± 0.05V
 
Size: 53*17*4.0mm Overdischarge voltage range: 2.3-3.0V ± 0.05V
 
Operating current: 0-8A Operating temperature: -40-- 50℃
 
Instantaneous current: 11-13A Storage conditions: -40-- 80℃
 
Static current: less than 30uA Effective life: more than 30000 hours
 
Internal resistance: less than 100m ω Short circuit protection: protectable, delay self-recovery.
 
The size and device description of the protection plate;
 
The size of the protection plate is 53*17*4.0mm; Components are 2101-CB protection chip and AOD472*2;
1005003280976543 - supersel