- -43%
Szín: B - 100 DB szállítás 5mW 650nm Red Line lézermodul fókusz, állítható lézerfej, 5V ipari minőségű
Szín: B - 100 DB szállítás 5mW 650nm Red Line lézermodul fókusz, állítható lézerfej, 5V ipari minőségű
13 475 Ft
43% megtakarítás
23 640 Ft
Nincs adó
Technical parameters
Model: LD - G650A03
Output: Dotted red (650nm)
Size: 12.0 x35mm Φ
Cable length: about 135mm
Net weight: 13.5 g
Voltage: 3.0 V to 5 V
Current: 40 ma ()
808nm 500MW /-3nm 5.6mm easy to remove cover near infrared laser tube laser diode
Operating current 560mA
Current 620 ma,
Working voltage 2V
Green frequency doubling laser pump source
4.5V laser head Laser module Laser tube laser diode Plastic gyro module red dot
Product composition: the laser head is composed of light emitting tube core, concentrating lens and sleeve. These three parts have been assembled and sent to the user. The focal length of the lens has been adjusted and glued with strong glue.
Product description: Under ideal conditions (no dust, no smoke, no obstruction), laser transmission distance is unlimited. The laser head in the case of high air quality to 20MA working current, transmission distance can reach more than 1KM, in the general cloudy night, casually irradiated to 500 meters away from the object clearly visible; For a relatively close distance, even in the daytime under the sun, on the outdoor road, buildings are clearly visible
Operating voltage: 4.5 V 51 resistance Operating time: quite long (because there is no accurate test)
5V/3V laser head Laser diode Point copper semiconductor laser tube 6MM outer diameter
Red is positive and black is negative
Wavelength: 650NM Power: 5MW Outer diameter: 6MM
1: pay attention to the safety of the laser battery, to prevent others from removing the power pool caused by short circuit combustion or battery explosion accidents.
2: laser emission principle and the particularity of the production process determines that the laser does not have the characteristics of ordinary light: that is, three good (monochromatic good, good coherence, good direction) a high (high brightness).
3: mainly used for laser toys, all kinds of levelling instrument, ground wire instrument, etc
Make electronic pointer pen: when the teacher is lecturing, ask the students to observe and think with laser projection point.
Electronic level: the motor drives the bald head to rotate or twist and project it into a straight line on the wall for horizontal reference when decorating or pasting New Year pictures.
Micro LCD projection: remove the condenser and allow the laser to pass through the controllable LCD screen to create a clear projection on the wall.
Remote laser listener: let the laser shine on the glass of the room being overheard, and then receive the laser beam reflected back from the glass, detect the vibration of the glass and restore the sound of the room.
Remote light control anti-theft alarm: in the need to protect the fish pond or watermelon field installed on the one corner of the laser transmitting tube and photosensitive resistance, in the other three corners installed on the reverse mirror, formed a protection area.
Long-distance laser wireless communication: using a pair of laser transceiver devices respectively in two distant roofs facing each other, using the serial communication protocol of single chip microcomputer can send and receive documents, and even the Internet.
The laser head is composed of three parts: the light emitting tube core, the concentrating lens and the copper adjustable sleeve. When sent to the user, these three parts have been assembled, the lens focal length has also been adjusted, and has been glued with strong glue
Well, the user can work with 5V/3V DC power supply.
Matters needing attention:
This component is sensitive to static electricity, do not directly touch the laser tube body without anti-static measures, in addition, this product must have qualified drive circuit can work normally, different power voltage is the same, but the working current is different, the circuit of the tube drive current needs to be controlled within a safe range, otherwise it will affect the life.
Model: LD - G650A03
Output: Dotted red (650nm)
Size: 12.0 x35mm Φ
Cable length: about 135mm
Net weight: 13.5 g
Voltage: 3.0 V to 5 V
Current: 40 ma ()
808nm 500MW /-3nm 5.6mm easy to remove cover near infrared laser tube laser diode
Operating current 560mA
Current 620 ma,
Working voltage 2V
Green frequency doubling laser pump source
4.5V laser head Laser module Laser tube laser diode Plastic gyro module red dot
Product composition: the laser head is composed of light emitting tube core, concentrating lens and sleeve. These three parts have been assembled and sent to the user. The focal length of the lens has been adjusted and glued with strong glue.
Product description: Under ideal conditions (no dust, no smoke, no obstruction), laser transmission distance is unlimited. The laser head in the case of high air quality to 20MA working current, transmission distance can reach more than 1KM, in the general cloudy night, casually irradiated to 500 meters away from the object clearly visible; For a relatively close distance, even in the daytime under the sun, on the outdoor road, buildings are clearly visible
Operating voltage: 4.5 V 51 resistance Operating time: quite long (because there is no accurate test)
5V/3V laser head Laser diode Point copper semiconductor laser tube 6MM outer diameter
Red is positive and black is negative
Wavelength: 650NM Power: 5MW Outer diameter: 6MM
1: pay attention to the safety of the laser battery, to prevent others from removing the power pool caused by short circuit combustion or battery explosion accidents.
2: laser emission principle and the particularity of the production process determines that the laser does not have the characteristics of ordinary light: that is, three good (monochromatic good, good coherence, good direction) a high (high brightness).
3: mainly used for laser toys, all kinds of levelling instrument, ground wire instrument, etc
Make electronic pointer pen: when the teacher is lecturing, ask the students to observe and think with laser projection point.
Electronic level: the motor drives the bald head to rotate or twist and project it into a straight line on the wall for horizontal reference when decorating or pasting New Year pictures.
Micro LCD projection: remove the condenser and allow the laser to pass through the controllable LCD screen to create a clear projection on the wall.
Remote laser listener: let the laser shine on the glass of the room being overheard, and then receive the laser beam reflected back from the glass, detect the vibration of the glass and restore the sound of the room.
Remote light control anti-theft alarm: in the need to protect the fish pond or watermelon field installed on the one corner of the laser transmitting tube and photosensitive resistance, in the other three corners installed on the reverse mirror, formed a protection area.
Long-distance laser wireless communication: using a pair of laser transceiver devices respectively in two distant roofs facing each other, using the serial communication protocol of single chip microcomputer can send and receive documents, and even the Internet.
The laser head is composed of three parts: the light emitting tube core, the concentrating lens and the copper adjustable sleeve. When sent to the user, these three parts have been assembled, the lens focal length has also been adjusted, and has been glued with strong glue
Well, the user can work with 5V/3V DC power supply.
Matters needing attention:
This component is sensitive to static electricity, do not directly touch the laser tube body without anti-static measures, in addition, this product must have qualified drive circuit can work normally, different power voltage is the same, but the working current is different, the circuit of the tube drive current needs to be controlled within a safe range, otherwise it will affect the life.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
