• -43%

ÚJ DC-DC nagyfeszültségű kondenzátor töltés ZVS boost modul pisztolyok 45-390V 780V állítható szabályozó egyszeri

ÚJ DC-DC nagyfeszültségű kondenzátor töltés ZVS boost modul pisztolyok 45-390V 780V állítható szabályozó egyszeri

380 Ft 43% megtakarítás
667 Ft
Nincs adó
Module parameters:
 
 
 
Module name: High voltage booster module
 
Module nature: Non-isolated booster module
 
Input voltage: two input voltage ranges are optional (through the jumper selection on the back of PCB, default output is 10-32V input)
 
1, 8-16V input (for three series of lithium and 12V battery applications)
 
2, 10-32V input (for wide input voltage range applications)
 
Input current: 5A (MAX)
 
Static working current: 15mA(when 12V rises 50V, the higher the output voltage is, the static current will increase)
 
Output voltage: 45-390V continuously adjustable.
 
Output current: 0.2a MAX (Related to the input and output pressure difference, the higher the output voltage, the lower the output current)
 
Output power: 40W (peak value: 70W)
 
Operating temperature: -40~ 85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
 
Operating frequency: 75KHz
 
Conversion efficiency: 88% (efficiency is related to input and output voltage, current and pressure difference)
 
Short circuit protection: Yes. (Input 10A fuse, output end please do not directly short circuit pull arc! Direct short circuit arc pulling may damage the rectifier, if short circuit arc pulling please series power resistor current limiting)
 
Overcurrent protection: Yes. (If the input current exceeds 4.5a, lower the output voltage)
 
Overvoltage protection: Yes. (If the output voltage exceeds 410V, lower the output voltage)
 
Input reverse connection protection: (non - self - recovery, backfiring fuse, try not to reverse.
 
Installation: 4 3mm screws
 
Wiring mode: welding free output of wiring terminal (welding output with shell)
 
Module size: length 60mm width 50mm height 22mm
 
Measured data of capacitor charging time:
 
470uF to 390V in 2 seconds
 
1000uF to 390V in 4 seconds
 
2200uF to 390V in 8 seconds
 
4700uF to 390V in 18 seconds
 
Special attention!! The output of this module is high voltage, which may endanger human and animal life. Please pay attention to safety precautions during use. The store is not responsible for this.
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

ÚJ DC-DC nagyfeszültségű kondenzátor töltés ZVS boost modul pisztolyok 45-390V 780V állítható szabályozó egyszeri kimenet
NEW DC-DC high voltage capacitor charging ZVS boost module guns 45-390V 780V Adjustable Regulator Single Output
Module parameters:
 
 
 
Module name: High voltage booster module
 
Module nature: Non-isolated booster module
 
Input voltage: two input voltage ranges are optional (through the jumper selection on the back of PCB, default output is 10-32V input)
 
1, 8-16V input (for three series of lithium and 12V battery applications)
 
2, 10-32V input (for wide input voltage range applications)
 
Input current: 5A (MAX)
 
Static working current: 15mA(when 12V rises 50V, the higher the output voltage is, the static current will increase)
 
Output voltage: 45-390V continuously adjustable.
 
Output current: 0.2a MAX (Related to the input and output pressure difference, the higher the output voltage, the lower the output current)
 
Output power: 40W (peak value: 70W)
 
Operating temperature: -40~ 85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
 
Operating frequency: 75KHz
 
Conversion efficiency: 88% (efficiency is related to input and output voltage, current and pressure difference)
 
Short circuit protection: Yes. (Input 10A fuse, output end please do not directly short circuit pull arc! Direct short circuit arc pulling may damage the rectifier, if short circuit arc pulling please series power resistor current limiting)
 
Overcurrent protection: Yes. (If the input current exceeds 4.5a, lower the output voltage)
 
Overvoltage protection: Yes. (If the output voltage exceeds 410V, lower the output voltage)
 
Input reverse connection protection: (non - self - recovery, backfiring fuse, try not to reverse.
 
Installation: 4 3mm screws
 
Wiring mode: welding free output of wiring terminal (welding output with shell)
 
Module size: length 60mm width 50mm height 22mm
 
Measured data of capacitor charging time:
 
470uF to 390V in 2 seconds
 
1000uF to 390V in 4 seconds
 
2200uF to 390V in 8 seconds
 
4700uF to 390V in 18 seconds
 
Special attention!! The output of this module is high voltage, which may endanger human and animal life. Please pay attention to safety precautions during use. The store is not responsible for this.
1005003624450016 - supersel
1005003624450016

Hasonló kategóriák mint 16 :

Reviews

Write your review

ÚJ DC-DC nagyfeszültségű kondenzátor töltés ZVS boost modul pisztolyok 45-390V 780V állítható szabályozó egyszeri

Module parameters:
 
 
 
Module name: High voltage booster module
 
Module nature: Non-isolated booster module
 
Input voltage: two input voltage ranges are optional (through the jumper selection on the back of PCB, default output is 10-32V input)
 
1, 8-16V input (for three series of lithium and 12V battery applications)
 
2, 10-32V input (for wide input voltage range applications)
 
Input current: 5A (MAX)
 
Static working current: 15mA(when 12V rises 50V, the higher the output voltage is, the static current will increase)
 
Output voltage: 45-390V continuously adjustable.
 
Output current: 0.2a MAX (Related to the input and output pressure difference, the higher the output voltage, the lower the output current)
 
Output power: 40W (peak value: 70W)
 
Operating temperature: -40~ 85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
 
Operating frequency: 75KHz
 
Conversion efficiency: 88% (efficiency is related to input and output voltage, current and pressure difference)
 
Short circuit protection: Yes. (Input 10A fuse, output end please do not directly short circuit pull arc! Direct short circuit arc pulling may damage the rectifier, if short circuit arc pulling please series power resistor current limiting)
 
Overcurrent protection: Yes. (If the input current exceeds 4.5a, lower the output voltage)
 
Overvoltage protection: Yes. (If the output voltage exceeds 410V, lower the output voltage)
 
Input reverse connection protection: (non - self - recovery, backfiring fuse, try not to reverse.
 
Installation: 4 3mm screws
 
Wiring mode: welding free output of wiring terminal (welding output with shell)
 
Module size: length 60mm width 50mm height 22mm
 
Measured data of capacitor charging time:
 
470uF to 390V in 2 seconds
 
1000uF to 390V in 4 seconds
 
2200uF to 390V in 8 seconds
 
4700uF to 390V in 18 seconds
 
Special attention!! The output of this module is high voltage, which may endanger human and animal life. Please pay attention to safety precautions during use. The store is not responsible for this.

Write your review