- -43%
12V–220V Step UP tápmodul 35W DC-AC Boost Inverter modul Kétcsatornás inverz átalakító Booster modul
12V–220V Step UP tápmodul 35W DC-AC Boost Inverter modul Kétcsatornás inverz átalakító Booster modul
205 Ft
43% megtakarítás
359 Ft
Nincs adó
The actual voltage of this product is between 210V and 240V in line with the electrical input safety voltage. Now the upgraded version is dual-mode output,
Output DC and AC double output, can output DC and AC voltage fully compatible with all kinds of more electrical appliances
Without connecting wires, you need to weld input and output wires by yourself.
Instructions: This product can convert the direct current of 8V-13V battery into 220V AC power for household use, and double output of DC output.
Output A B 220V with overload protection 1-- 20W
A C 220V with overload protection 1-- 15W
B D 220V no overload protection 1-- 35W
Maximum power 40w you are advised to use the device with the maximum power 35w
This product is the latest 4 generation boost module, boost transformer. Input 12V DC, the other end can get 220V AC, and 220V DC voltage. The frequency is high frequency, the output power is larger, can drive 40W energy-saving lamp.
Power failure (outdoor) for power supply:
Modem Broadband cat Internet access cat telecom cat router satellite receiver
Phone master phone charging energy-saving lamp lighting fluorescent lamp lighting IED lamp lighting
DVD player VCD player EVD player Speaker switch power supply Mobile phone charger
Electric soldering iron
It worked out pretty well.
This product can be used in any household electrical circuit board; Such as for energy-saving lamps is perfect, stronger performance; More stable power; Better effect, quality is significantly more durable than the old model:
Can make their own boost circuit; The maximum power of a circuit board is 40W, if the power is too small; Circuit boards can be connected in parallel; The power of 10 circuit boards in parallel can reach 120W-200W; Can be used for other high power household appliances! When the power goes out; Can be used for any electrical appliances; If the power of household appliances is large, only parallel can be used; After the parallel connection, it still belongs to the automatic current state, and will not burn out the electric appliance because of the excessive current! After parallel connection, it still saves up to 48.26% electricity than other similar products "12V-220V inverter booster "!
Power available :220V 0.1W-40W
In this declaration: LED lights are divided into 2 kinds (cross current power supply drive and resistance and capacitance drive)
This circuit board can only be used in cross current power supply drives of good market quality.
For low quality resistance and capacitance drive, not suitable for use.
Because of the resistor capacitance drive to pull up the voltage of the circuit board. The voltage is too high and the resistance on the capacitance drive is too high.
(Power factor line LED lamp drive any inverter can not be used "10W, plastic shell LED lamp, may be: power factor line LED lamp")
(Note: this circuit board actually consumes 40W; The output power is 40W; When used in energy-saving lamps, it can activate energy-saving lamps for 50W instantly. Then automatically drop ground current; Keep the current at the optimal 40W; But CFLS have the same brightness as 40W)
Best for 220V actual consumption power 0.1W to 40W energy-saving lamp! Compatible with 21W-50W energy-saving lamps; After starting brightness 40W or so!
Product voltage DC12V: inverter output voltage AC220V maximum power output 36 watts; Actual power consumption 40W!
(note :" This circuit has been patented, please pay attention to the way of use. "The actual consumption of this circuit board is 40W, and the actual power is 40W. Can be used within 40W household appliances; Small power; Can be used in parallel; Automatic current change!
The power of 10 circuit boards in parallel can be up to 12W-200W; Can use electrical 12W-200W lamps; 12W-200W household appliances! (note: support all "electronic product"), such as "energy-saving light soldering speakers sound switch power supply, satellite TV receiver LED bulb light LED energy-saving fluorescent lamp DVD VCD machine EVD machine LCD TV in black and white TV color TV flat-screen TV laptop computer monitor all electronic charger products, etc." are all can use; Need to buy customers can consult the owner!
Electrical appliances that do not meet the requirements shall not be used:
The first; Do not use in: iron core transformer! Electric fans and other purely inductive loads can not be used.
The second; Cannot be used in; On non-electronic products!
The third; Notebook power supply, adapter, charger with lightning protection accessories. Remove the lightning protection parts and use them.
The fourth; Cannot be used in; Capacitance power supply on the LED lamp!
Note: please test output voltage with load, easy to burn voltmeter without load.
Before leaving the factory, it is strictly required that each batch of goods must carry out 40W load test; In the normal range of use can be more than 2 years!
Circuit board output "voltage AC220V: power 0.1W to 40W!
Range of use "less than or equal to 40W"
Output DC and AC double output, can output DC and AC voltage fully compatible with all kinds of more electrical appliances
Without connecting wires, you need to weld input and output wires by yourself.
Instructions: This product can convert the direct current of 8V-13V battery into 220V AC power for household use, and double output of DC output.
Output A B 220V with overload protection 1-- 20W
A C 220V with overload protection 1-- 15W
B D 220V no overload protection 1-- 35W
Maximum power 40w you are advised to use the device with the maximum power 35w
This product is the latest 4 generation boost module, boost transformer. Input 12V DC, the other end can get 220V AC, and 220V DC voltage. The frequency is high frequency, the output power is larger, can drive 40W energy-saving lamp.
Power failure (outdoor) for power supply:
Modem Broadband cat Internet access cat telecom cat router satellite receiver
Phone master phone charging energy-saving lamp lighting fluorescent lamp lighting IED lamp lighting
DVD player VCD player EVD player Speaker switch power supply Mobile phone charger
Electric soldering iron
It worked out pretty well.
This product can be used in any household electrical circuit board; Such as for energy-saving lamps is perfect, stronger performance; More stable power; Better effect, quality is significantly more durable than the old model:
Can make their own boost circuit; The maximum power of a circuit board is 40W, if the power is too small; Circuit boards can be connected in parallel; The power of 10 circuit boards in parallel can reach 120W-200W; Can be used for other high power household appliances! When the power goes out; Can be used for any electrical appliances; If the power of household appliances is large, only parallel can be used; After the parallel connection, it still belongs to the automatic current state, and will not burn out the electric appliance because of the excessive current! After parallel connection, it still saves up to 48.26% electricity than other similar products "12V-220V inverter booster "!
Power available :220V 0.1W-40W
In this declaration: LED lights are divided into 2 kinds (cross current power supply drive and resistance and capacitance drive)
This circuit board can only be used in cross current power supply drives of good market quality.
For low quality resistance and capacitance drive, not suitable for use.
Because of the resistor capacitance drive to pull up the voltage of the circuit board. The voltage is too high and the resistance on the capacitance drive is too high.
(Power factor line LED lamp drive any inverter can not be used "10W, plastic shell LED lamp, may be: power factor line LED lamp")
(Note: this circuit board actually consumes 40W; The output power is 40W; When used in energy-saving lamps, it can activate energy-saving lamps for 50W instantly. Then automatically drop ground current; Keep the current at the optimal 40W; But CFLS have the same brightness as 40W)
Best for 220V actual consumption power 0.1W to 40W energy-saving lamp! Compatible with 21W-50W energy-saving lamps; After starting brightness 40W or so!
Product voltage DC12V: inverter output voltage AC220V maximum power output 36 watts; Actual power consumption 40W!
(note :" This circuit has been patented, please pay attention to the way of use. "The actual consumption of this circuit board is 40W, and the actual power is 40W. Can be used within 40W household appliances; Small power; Can be used in parallel; Automatic current change!
The power of 10 circuit boards in parallel can be up to 12W-200W; Can use electrical 12W-200W lamps; 12W-200W household appliances! (note: support all "electronic product"), such as "energy-saving light soldering speakers sound switch power supply, satellite TV receiver LED bulb light LED energy-saving fluorescent lamp DVD VCD machine EVD machine LCD TV in black and white TV color TV flat-screen TV laptop computer monitor all electronic charger products, etc." are all can use; Need to buy customers can consult the owner!
Electrical appliances that do not meet the requirements shall not be used:
The first; Do not use in: iron core transformer! Electric fans and other purely inductive loads can not be used.
The second; Cannot be used in; On non-electronic products!
The third; Notebook power supply, adapter, charger with lightning protection accessories. Remove the lightning protection parts and use them.
The fourth; Cannot be used in; Capacitance power supply on the LED lamp!
Note: please test output voltage with load, easy to burn voltmeter without load.
Before leaving the factory, it is strictly required that each batch of goods must carry out 40W load test; In the normal range of use can be more than 2 years!
Circuit board output "voltage AC220V: power 0.1W to 40W!
Range of use "less than or equal to 40W"
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
