- -25%
Szín: APDS9930 - APDS-9930 APDS-9960 VL6180 VL6180X Gesztusfelismerő érzékelő PAJ7620U2 érintésmentes gesztusérzékelő
Szín: APDS9930 - APDS-9930 APDS-9960 VL6180 VL6180X Gesztusfelismerő érzékelő PAJ7620U2 érintésmentes gesztusérzékelő
187 Ft
25% megtakarítás
249 Ft
Nincs adó
VL6180X:
Product introduction:
The VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor. The VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance. Unlike most distance sensors that rely on reflected light intensity or angle of reflection to determine the distance, the VL6180 uses an accurate clock to measure the time it takes for light to bounce off the surface, since it uses a very narrow source, which is different from ultrasonic sonar. Unlike traditional infrared distance sensors, you can't tell if an object is close because there is no linear problem or "dual imaging." Therefore, the VL6180X is more accurate. The VL6180 module is recommended to handle distances from 5mm to 100mm. Due to its small size, the sensor module is easy to use in any robot or interactive project. You can use it with any 3-5V power supply or logic microcontroller. Product Features 1. Integrated intelligent optical module, which can be used for proximity sensing, ranging and other functions; 2. Fast and accurate distance measurement. Measure the absolute range from 0 to 100 mm or more. Based on object-independent self-illuminating beam reflection measurements, measurements over 100 mm can be used in some extremelydesirable target reflectances and environments, but are not guaranteed; 3. I2C interface for device con two programmable GPIOs.
VL6180:
Description:
1. IR emitter:850nm
2. Distance:0-50cm
3. I2C address:0x29 (7-bit)
4. Ambient light sensor:0.038 to 50klux(2) 16-bit output(3)
APDS-9930:
Description:
APDS-9930 provides an I⊃2;C-compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED's, where ambient light sensor is approximated using a dual LED illumination 0.01 lux under low lumens human visual response performance, high sensitivity can be provided so that the operation of the device in the dark glass. The proximity sensor can be adjusted through the full 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements. From bright sunlight to dark rooms, proximity detection feature can work well. Module was added to provide micro-optic lenses infrared energy efficient transmission and reception, can reduce the overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
Application:
Dimmable backlight phone
You can disable the touch screen mobile phone
Notebook / Monitor Safety
Handsfree mode is automatically enabled
Auto pop-up menu
Digital Camera Eye Sensor
Product introduction:
The VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor. The VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance. Unlike most distance sensors that rely on reflected light intensity or angle of reflection to determine the distance, the VL6180 uses an accurate clock to measure the time it takes for light to bounce off the surface, since it uses a very narrow source, which is different from ultrasonic sonar. Unlike traditional infrared distance sensors, you can't tell if an object is close because there is no linear problem or "dual imaging." Therefore, the VL6180X is more accurate. The VL6180 module is recommended to handle distances from 5mm to 100mm. Due to its small size, the sensor module is easy to use in any robot or interactive project. You can use it with any 3-5V power supply or logic microcontroller. Product Features 1. Integrated intelligent optical module, which can be used for proximity sensing, ranging and other functions; 2. Fast and accurate distance measurement. Measure the absolute range from 0 to 100 mm or more. Based on object-independent self-illuminating beam reflection measurements, measurements over 100 mm can be used in some extremelydesirable target reflectances and environments, but are not guaranteed; 3. I2C interface for device con two programmable GPIOs.
VL6180:
Description:
1. IR emitter:850nm
2. Distance:0-50cm
3. I2C address:0x29 (7-bit)
4. Ambient light sensor:0.038 to 50klux(2) 16-bit output(3)
APDS-9930:
Description:
APDS-9930 provides an I⊃2;C-compatible interface in a single 8-pin package ambient light sensor (ALS, Ambient Light Sensor) and proximity sensor with infrared LED's, where ambient light sensor is approximated using a dual LED illumination 0.01 lux under low lumens human visual response performance, high sensitivity can be provided so that the operation of the device in the dark glass. The proximity sensor can be adjusted through the full 100 mm object detection, eliminating the terminal equipment and sub-assembly factory calibration requirements. From bright sunlight to dark rooms, proximity detection feature can work well. Module was added to provide micro-optic lenses infrared energy efficient transmission and reception, can reduce the overall power consumption. In addition, the internal state machine allows the device to enter a low-power mode, bringing the average power consumption low.
Application:
Dimmable backlight phone
You can disable the touch screen mobile phone
Notebook / Monitor Safety
Handsfree mode is automatically enabled
Auto pop-up menu
Digital Camera Eye Sensor
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
