- -43%
Szín: nincs hűtőborda - Egyenáramú emelőfeszültség állandó feszültség állandó áram kimeneti feszültség
Szín: nincs hűtőborda - Egyenáramú emelőfeszültség állandó feszültség állandó áram kimeneti feszültség
1 065 Ft
43% megtakarítás
1 868 Ft
Nincs adó
180W automatic pressure lifting module
\ \
Module parameters:
\ \
Module properties: Non-isolated voltage regulator
\ \
Input voltage: 10.5-70VDC when the power supply voltage is lower than 12V, derate the voltage
\ \
Input current: 10A Max for a long time 8A Max
\ \
Output voltage 2.5-58VDC
\ \
Adaptive input voltage higher or lower than the set output voltage applications
\ \
Output current: 8A Max For a long time 6A Max do not allow the input and output current to work at the maximum value, the combined input and output current cannot exceed 12A
\ \
Constant current adjustable: 0.5-8A
\ \
Output power: 180W Max maximum current at low voltage 8A naked board without auxiliary heat dissipation maximum output 30W with heat sink without fan maximum output 50W when the temperature of the module exceeds 65 ° c, heat dissipation must be strengthened
\ \
Standby current: about 20mA
\ \
Conversion efficiency: about 90%
\ \
Input anti-connection: No, please confirm positive and negative before powering on
\ \
Dimensions: 70*52*21MM (bare board)
\ \
70*52*46MM (with heat sink and fan)
\ \
Weight: about 70 g bare plate with heat sink about 120 g Heat sink with fan about 135 g
\ \
\ \
Features:
\ \
Adopt high thermal conductivity aluminum base plate to adjust meter, convenient external radiator
\ \
Input wide range, can boost, buck, stable voltage
\ \
Input and output 0 differential pressure, adjustable output voltage
\ \
Output voltage/current regulation method:
\ \
1, adjust the constant voltage adjustable potentiometer (clockwise to reduce the voltage, clockwise to increase the voltage), according to your load requirements, the output voltage is set to the voltage value you need. For example, the voltage of 10 LED is adjusted to 37V.
\ \
2, clockwise constant current adjustable potentiometer about 20 laps, the output current to set as the minimum, connected to the LED, constant current adjustable potentiometer to the current you need. Used for battery charging, put the battery after the power, and then received the output, adjust to the current you need, (for charging must be put out of the battery adjustment is accurate, because the battery left in the amount of electricity, the smaller the charging current.) After improvement can be used to short-circuit the way to adjust the current, can be used to short-circuit the way to adjust the current, can be used to short-circuit the way to adjust the current, (method: adjust the output voltage to 5V, clockwise constant current adjustable potentiometer 20 laps, and then short-circuit the output short-circuit current)
\ \
Module parameters:
\ \
Module properties: Non-isolated voltage regulator
\ \
Input voltage: 10.5-70VDC when the power supply voltage is lower than 12V, derate the voltage
\ \
Input current: 10A Max for a long time 8A Max
\ \
Output voltage 2.5-58VDC
\ \
Adaptive input voltage higher or lower than the set output voltage applications
\ \
Output current: 8A Max For a long time 6A Max do not allow the input and output current to work at the maximum value, the combined input and output current cannot exceed 12A
\ \
Constant current adjustable: 0.5-8A
\ \
Output power: 180W Max maximum current at low voltage 8A naked board without auxiliary heat dissipation maximum output 30W with heat sink without fan maximum output 50W when the temperature of the module exceeds 65 ° c, heat dissipation must be strengthened
\ \
Standby current: about 20mA
\ \
Conversion efficiency: about 90%
\ \
Input anti-connection: No, please confirm positive and negative before powering on
\ \
Dimensions: 70*52*21MM (bare board)
\ \
70*52*46MM (with heat sink and fan)
\ \
Weight: about 70 g bare plate with heat sink about 120 g Heat sink with fan about 135 g
\ \
\ \
Features:
\ \
Adopt high thermal conductivity aluminum base plate to adjust meter, convenient external radiator
\ \
Input wide range, can boost, buck, stable voltage
\ \
Input and output 0 differential pressure, adjustable output voltage
\ \
Output voltage/current regulation method:
\ \
1, adjust the constant voltage adjustable potentiometer (clockwise to reduce the voltage, clockwise to increase the voltage), according to your load requirements, the output voltage is set to the voltage value you need. For example, the voltage of 10 LED is adjusted to 37V.
\ \
2, clockwise constant current adjustable potentiometer about 20 laps, the output current to set as the minimum, connected to the LED, constant current adjustable potentiometer to the current you need. Used for battery charging, put the battery after the power, and then received the output, adjust to the current you need, (for charging must be put out of the battery adjustment is accurate, because the battery left in the amount of electricity, the smaller the charging current.) After improvement can be used to short-circuit the way to adjust the current, can be used to short-circuit the way to adjust the current, can be used to short-circuit the way to adjust the current, (method: adjust the output voltage to 5V, clockwise constant current adjustable potentiometer 20 laps, and then short-circuit the output short-circuit current)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
