- -43%
XL6009 Boost Step-up modul tápegység LED feszültségmérő Állítható boost modul digitális feszültségmérő kijelzővel
XL6009 Boost Step-up modul tápegység LED feszültségmérő Állítható boost modul digitális feszültségmérő kijelzővel
275 Ft
43% megtakarítás
482 Ft
Nincs adó
Advantages of upgraded version:
The internal high-precision reference and the partial voltage sampling resistance with one thousandth of low temperature drift are adopted, and the software performs multiple filtering processing, which greatly improves the accuracy of voltage acquisition.
Key function description:
Each time the key is pressed, the voltage displayed on the nixie tube is switched between the input and output voltages. At the same time, the input led and output indication LED on the board are also switched.
Press and hold the key for 2 seconds to turn off the nixie tube.
Parameter Description:
● ultra wide input voltage 3V ~ 32V (the boost below 5V works normally, but the nixie tube does not work), and the preferred working voltage range is 5 ~ 32V;
● ultra wide boost output voltage 5V ~ 40V;
● built in 4A high efficiency MOSFET switch tube, making the efficiency up to 94% ; (lm2577 current only 3a)
● the ultra-high switching frequency is 400kHz, and a small filter capacitor can be used to achieve very good results, with smaller ripple and smaller volume. (lm2577 frequency is only 50KHz)
● with input display indicator and output display indicator. When the nixie tube displays the input voltage, the in indicator is on, and when the nixie tube displays the output voltage, the out indicator is on
Wiring instructions:
In : input positive pole
In -: input negative pole
Out : output positive
Out -: output negative pole
Other instructions:
Xl6009 is a high-performance boost module with 4A switching current. The module uses the xl6009e1 of the second generation high frequency switching technology as the core chip, and its performance is much better than that of the lm2577 of the second generation technology. Xl6009 boost module has lower cost and better performance, and lm2577 module will be eliminated soon.
● it can be used conveniently without soldering iron with wiring terminal, and the welding wire connection point is reserved.
● it has the functions of overheating protection and short circuit protection
● size 65 * 39 * 14mm
● weight 24g
Technical parameters:
Module nature: non isolated boost (boost)
Rectification mode: asynchronous rectification
Input current: 4a (), no-load 18ma (5V input, 8V output, no-load less than 18ma. The higher the voltage, the greater the no-load current.)
Conversion efficiency: < 94% (the greater the pressure difference, the lower the efficiency)
Switching frequency: 400kHz
Output ripple: 50mV (the higher the voltage, the greater the current, and the greater the ripple)
Load adjustment rate: ± 0.5%
Voltage regulation rate: ± 0.5%
Operating temperature: - 40 ℃ ~ 85 ℃
Overall dimension: 65mm * 39mm * 14mm (length * width * height)
The internal high-precision reference and the partial voltage sampling resistance with one thousandth of low temperature drift are adopted, and the software performs multiple filtering processing, which greatly improves the accuracy of voltage acquisition.
Key function description:
Each time the key is pressed, the voltage displayed on the nixie tube is switched between the input and output voltages. At the same time, the input led and output indication LED on the board are also switched.
Press and hold the key for 2 seconds to turn off the nixie tube.
Parameter Description:
● ultra wide input voltage 3V ~ 32V (the boost below 5V works normally, but the nixie tube does not work), and the preferred working voltage range is 5 ~ 32V;
● ultra wide boost output voltage 5V ~ 40V;
● built in 4A high efficiency MOSFET switch tube, making the efficiency up to 94% ; (lm2577 current only 3a)
● the ultra-high switching frequency is 400kHz, and a small filter capacitor can be used to achieve very good results, with smaller ripple and smaller volume. (lm2577 frequency is only 50KHz)
● with input display indicator and output display indicator. When the nixie tube displays the input voltage, the in indicator is on, and when the nixie tube displays the output voltage, the out indicator is on
Wiring instructions:
In : input positive pole
In -: input negative pole
Out : output positive
Out -: output negative pole
Other instructions:
Xl6009 is a high-performance boost module with 4A switching current. The module uses the xl6009e1 of the second generation high frequency switching technology as the core chip, and its performance is much better than that of the lm2577 of the second generation technology. Xl6009 boost module has lower cost and better performance, and lm2577 module will be eliminated soon.
● it can be used conveniently without soldering iron with wiring terminal, and the welding wire connection point is reserved.
● it has the functions of overheating protection and short circuit protection
● size 65 * 39 * 14mm
● weight 24g
Technical parameters:
Module nature: non isolated boost (boost)
Rectification mode: asynchronous rectification
Input current: 4a (), no-load 18ma (5V input, 8V output, no-load less than 18ma. The higher the voltage, the greater the no-load current.)
Conversion efficiency: < 94% (the greater the pressure difference, the lower the efficiency)
Switching frequency: 400kHz
Output ripple: 50mV (the higher the voltage, the greater the current, and the greater the ripple)
Load adjustment rate: ± 0.5%
Voltage regulation rate: ± 0.5%
Operating temperature: - 40 ℃ ~ 85 ℃
Overall dimension: 65mm * 39mm * 14mm (length * width * height)
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
