XL6009 DC-DC feszültségemelő modul A széles bemeneti feszültség ADAPTÁLIK a napelem automatikus feszültségemeléséhez
XL6009 DC-DC voltage lift module The wide input voltage ADAPTS to the automatic voltage lift of the solar panel
Module Description:
 
The voltage can be pulled down to 7V or less at startup and 15V or more at high engine RPM. The automatic voltage lifting module solves this problem. No matter the input voltage is 5V, 12V or 32V, the output can be stable at 12V.
 
1, ultra wide input voltage range: 5V~32V;
 
2, ultra wide output voltage range: 1.25V~35V (with automatic lifting voltage, within the working range, any voltage input can be stabilized at any voltage output);
 
3, built-in 4A high efficiency MOSFET switch tube, make the efficiency up to 94% ; (LM2577 current only 3A)
 
4, ultra-high switching frequency of 400KHz, smaller ripple, smaller volume. (LM2577 frequency only 50KHz)
 
5. The module adopts SEPIC topological circuit, which is a mature voltage lifting scheme.
 
6, main chip XL6009, with ultra-high switching frequency of 400KHz, smaller ripple, smaller volume. (LM2577 frequency only 50KHz)
 
 
 
Instructions:
 
1. Power on (5-32V). The power indicator is on, and the module works normally.
 
2. Adjust the blue potentiometer knob (generally clockwise rotation boost, counterclockwise rotation
 
Switch to step-down) and use a multimeter to monitor the output voltage until it reaches the required voltage.
 
 
 
3. Some customers complain that the output voltage of the module cannot be adjusted and is always equal to the input voltage. When you encounter this kind of problem, please rotate counterclockwise potentiometer above 10 laps first, and then use the module to adjust the voltage normally.
 
Matters needing attention:
 
1. It is recommended to use the current within 2.7A for long time work. To ensure stable output, keep the minimum 1.5V differential pressure.
2. Connect cables as shown in the connection diagram. Do not connect cables incorrectly.
 
Application Cases:
 
1. Vehicle voltage regulator power supply, just need to connect the input end of this module to the car cigarette holder power supply, you can adjust the potentiometer, the output voltage can be adjusted at 1.25-30V, for your mobile phone, MP3, MP4, PSP charging and many other equipment power, very simple and convenient.
 
2. Power supply for electronic equipment. When the equipment needs 3-35V power supply and the corresponding voltage power supply is in hand, this module can be used to conveniently adjust the voltage to the required voltage to solve the problem.
 
3. System working voltage test, can use this module to debug various voltage test system working voltage range, very easy and convenient.
 
 
 
4. Automotive voltage regulator, solar photovoltaic power generation, wind power generation and other voltage instability applications.
 
Shipping List:
 
 
 
Automatic pressure lifting module X1 (exquisitely independent packed electrostatic bag)
 
 
                               
1005004309960193. - fareast