Alumínium fém kiforrasztó szivattyú szívó ón pisztoly forrasztó tapadó toll eltávolítása vákuum forrasztópáka kiforrasztó kézi hegesztő szerszámok
Aluminum Metal Desoldering Pump Suction Tin Gun Soldering Sucker Pen Removal Vacuum Soldering Iron Desolder Hand Welding Tools
Specifications: Temperature adjustment range: 1℃ Scope of application: In addition to tin Net weight: approx. 40g Length: Approximately 200mm/7.87'' Material: Semi-aluminum, Semi-plastic/All-aluminum Maximum suction: 30 Color: Blue/Gold Operation manual: 1. Press down the piston of the solder sucker to block it. 2. Use an electric soldering iron to heat the solder joint to melt the solder. 3. Remove the soldering iron, quickly put in the resistance paste solder of the solder sucker, and press the button of the solder sucker. 4. If it is not clean once, it can be repeated many times. skills:
1. Ensure that the piston of the solder sucker is well sealed. Before powering on, plug the hole of the solder suction head with your fingers, and press the button of the solder suction head. If the piston does not easily pop into place, it means that the seal is good.
2. The size of the hole suction tin head is different, choose the appropriate size.
3. The suction head is worn out and should be replaced with a new one.
4. The solder paste is immersed in a little rosin before it comes into contact with the solder to improve the fluidity of the solder.
5. The head contact pad is slightly longer. After the solder is melted, draw a circle with the solder joint pin as the center and extend it clockwise, and then press the solder suction button.
 
notes
1. Manual measurement, please allow 1~2mm error, thank you.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the item. Please allow a little color difference.
3. If you have any demand for more products, please contact us.
4. If you have a problem with the product, please contact us to handle it for you before the evaluation
 
1005004313957067. - fareast