- -40%
Fehér szín - Vezeték nélküli audio jeladó 2.4 GHIFI késleltetés nélküli digitális optikai audio és analóg hang
Fehér szín - Vezeték nélküli audio jeladó 2.4 GHIFI késleltetés nélküli digitális optikai audio és analóg hang
3 077 Ft
40% megtakarítás
5 129 Ft
Nincs adó
Connect the SPDIF cable and RCA cable to the corresponding port of this product, and connect the USB cable to the power port
Connect the headset to the 3.5mm port of the RX
Match and switch SPDIF or RCR or USB audio input through the buttons on the TX side
If entering pairing mode, the LED will keep flashing for 15S and then exit! If the pairing is successful in the middle, it will exit the pairing mode and enter the working mode. There is a polymer battery inside the receiver. When the power of the receiver is about to run out, please charge it in time to avoid affecting the audio reception quality.
The wireless 2.4G HIFI/no delay audio transmitter transmits digital optical fiber audio and analog R/L audio through wireless 2.4G, realizes high-fidelity wireless audio connection between audio equipment, eliminates audio cables, and transmits up to 15 meters. No delay, with the ability to penetrate the wall, strong anti-interference, simple installation, portable. Widely used in home theater, game live broadcast, event live broadcast and other fields.
1. Analog audio interface RCA input
2. Digital audio interface SPDIF input
3. USB audio and DC5V input
4. Long press: pairing mode (LED flashing)
5. Signal indicator: RCA 10MS fast flashes 2 times, SPDIF 20MS medium flashes 2 times, USB 40MS slow flashes 2 times
6. 3.5mm interface
7. VOL , support long press and short press
8. VOL-, support long press and short press
9. Standby button: Press and hold for 2S to enter pairing mode, press and hold for 3S in pairing mode to enter standby mode
size:83.5x55x24mm
Material:ABS
colour:Black
Package Contents:
1 * Host transmitter
1 * host receiver
1 * USB cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Connect the headset to the 3.5mm port of the RX
Match and switch SPDIF or RCR or USB audio input through the buttons on the TX side
If entering pairing mode, the LED will keep flashing for 15S and then exit! If the pairing is successful in the middle, it will exit the pairing mode and enter the working mode. There is a polymer battery inside the receiver. When the power of the receiver is about to run out, please charge it in time to avoid affecting the audio reception quality.
The wireless 2.4G HIFI/no delay audio transmitter transmits digital optical fiber audio and analog R/L audio through wireless 2.4G, realizes high-fidelity wireless audio connection between audio equipment, eliminates audio cables, and transmits up to 15 meters. No delay, with the ability to penetrate the wall, strong anti-interference, simple installation, portable. Widely used in home theater, game live broadcast, event live broadcast and other fields.
1. Analog audio interface RCA input
2. Digital audio interface SPDIF input
3. USB audio and DC5V input
4. Long press: pairing mode (LED flashing)
5. Signal indicator: RCA 10MS fast flashes 2 times, SPDIF 20MS medium flashes 2 times, USB 40MS slow flashes 2 times
6. 3.5mm interface
7. VOL , support long press and short press
8. VOL-, support long press and short press
9. Standby button: Press and hold for 2S to enter pairing mode, press and hold for 3S in pairing mode to enter standby mode
size:83.5x55x24mm
Material:ABS
colour:Black
Package Contents:
1 * Host transmitter
1 * host receiver
1 * USB cable
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
