- -43%
Piros szín - Kész/összeszerelt készletek ATU-100 automatikus antennatuner kártya 1,8-50 MHz 100 W by N7DDC 7X7 0,96
Piros szín - Kész/összeszerelt készletek ATU-100 automatikus antennatuner kártya 1,8-50 MHz 100 W by N7DDC 7X7 0,96
3 471 Ft
43% megtakarítás
6 090 Ft
Nincs adó
This assembled antenna tuner ATU-100 is an automatic tuning antenna.
When installing and using it, please try to use a short coaxial cable to connect the short wave machine to the in end of the antenna; use the out port to connect your antenna.
When the ATU-100 detects that the tuned transmit power is reached and the standing wave value is greater than 1.3, the tuning can be started, and after the tuning is completed (within the ability of ATU-100, if your antenna is not well matched, it will not be able to be reduced below 1.3, please adjust the antenna), you can perform high-power communication test.
The finished board comes with a 128 x 64 OLED display screen, which takes into account power saving and display font coordination; please pay attention to the consistency of the data cable (dat clk) when installing the screen.
Technical Parameter:
Allowable supply voltage range: 10-15V DC
Maximum current consumption: 400mA
Maximum working power: 100W
Maximum measurable power: 150W
Start to input tuning power: 5W (10W or more is recommended, and the maximum should not exceed 30W)
Minimum measurable power: 0.1W
Power measurement accuracy: 10%
Minimum load inductance value 0.05μh
Maximum load inductance value: 8.53μh
Minimum load capacitance: 10pf
Maximum load capacitance value: 1869pf
Other detailed technical parameters and schematic diagrams, documents, pcb source files and firmware can be downloaded from the following site:
https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards/tree/master/ATU_100_EXT_board
Colour: red
Material: PCB board plastic metal
Package Contents:
1 x Antenna Tuner
1 x cable (random cable color, don't accept the specified color)
1 x OLED screen
Note:
The product is assembled.
This finished board is a network open source project, we provide a test and modification platform for ham without DIY conditions (or you are unwilling to solder by yourself).
The firmware version has been upgraded to 3.2.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
When installing and using it, please try to use a short coaxial cable to connect the short wave machine to the in end of the antenna; use the out port to connect your antenna.
When the ATU-100 detects that the tuned transmit power is reached and the standing wave value is greater than 1.3, the tuning can be started, and after the tuning is completed (within the ability of ATU-100, if your antenna is not well matched, it will not be able to be reduced below 1.3, please adjust the antenna), you can perform high-power communication test.
The finished board comes with a 128 x 64 OLED display screen, which takes into account power saving and display font coordination; please pay attention to the consistency of the data cable (dat clk) when installing the screen.
Technical Parameter:
Allowable supply voltage range: 10-15V DC
Maximum current consumption: 400mA
Maximum working power: 100W
Maximum measurable power: 150W
Start to input tuning power: 5W (10W or more is recommended, and the maximum should not exceed 30W)
Minimum measurable power: 0.1W
Power measurement accuracy: 10%
Minimum load inductance value 0.05μh
Maximum load inductance value: 8.53μh
Minimum load capacitance: 10pf
Maximum load capacitance value: 1869pf
Other detailed technical parameters and schematic diagrams, documents, pcb source files and firmware can be downloaded from the following site:
https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards/tree/master/ATU_100_EXT_board
Colour: red
Material: PCB board plastic metal
Package Contents:
1 x Antenna Tuner
1 x cable (random cable color, don't accept the specified color)
1 x OLED screen
Note:
The product is assembled.
This finished board is a network open source project, we provide a test and modification platform for ham without DIY conditions (or you are unwilling to solder by yourself).
The firmware version has been upgraded to 3.2.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
