RF 433 Mhz Wireless Remote Control Switch Relay 220v 2 channels Receiver and Transmitter for Motor Garage Door Gate Curtain
Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door \ Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb \ ventilation device \ Signal transmission
Remote control motor positive and negative rotation \ motor switch \ DIY
Easy Setting up and use The relay receiver board has 2 operation modes, you can program as your requests.
1. Momentary Mode:
(Usually Use for Light / LED / lamp bulb / Garage / Gate/Motor)
Description :
Press and hold on button "A" ,this relay will turn on,
Release the A button, this relay will turn off.
Setting :
1. Press the learning button (on the Receiver) once. Wait for 3 seconds,
2. Press A button on the remote control. Wait for 2 seconds.
Then Press B button on the remote control.
2. Toggle Mode:
(Usually Use for Light / LED / lamp bulb / Garage / Gate/Motor)
Description :
Press button "A",this relay will turn on,
Press button "A" again, this relay will turn off.
Setting :
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds,
2. Press A button on the remote control. Wait for 2 seconds. Succeed.
Then Press B button on the remote control.
- Reset:
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. After reset, all the remote controls cannot work any more.
2. Before using the relay receiver board, please stretch the antenna on it slightly to increase the signal reception range.
Features:
?Remote control garage door
?Remote control projection curtain
?Remote control electric drive gate
?Remote control Electric curtain
Relay Receiver Board Parameter
--Working voltage : AC 85V~250V
--Quiescent Current : <5MA
--Max current : 10Amp
--Max load : 2200W
--RF frequency : 433MHz
--Pin : COM,NO,NC
--Working temperature : -30~+80
--Receiving Sensitivity : >97dbm
--Amount of storage remote controls : 25 pieces
--Support encoding : 1527 Leaning code /2262 fixed code
--RF Operating mode : ASK superheterodyne wireless reception
--Receiving range : Open space is more than 50 meters
--Remote operating mode : Momentary Mode / Toggle Mode
Transmitter Parameter --RF frequency : 433MHz
--Support encoding : 1527 Leaning code
--Transmitting range : Open space is more than 50 meters
--Battery : 2pcs * CR2016 ( include )
Receive DetailsRelay Reciever ( include shell )
4 Wiring diagramS
FORGarage/Gate/Motor/Light/Home appliance
The first Wiring diagramS
-------No Extra Power Use for Light/Home appliance
The second Wiring diagramS
------- No Extra Power Use for Motor/Electric Door
The third Wiring diagramS
------- Extra Power Use for Light/Home appliance
The fourth Wiring diagramS
------- Extra Power Use for Motor/Electric Door
The products are all producted by our own factory , Our factory can support OEM and ODM, welcome to consult.