Note:
We would suggest you to purchase our remote control for the better working performance.
Specifications Of The Transmitter:
Operating Frequency: 433.92MHz
Power by 12V23A Battery (Battery not included).
Material: PVC.
Button: 2/4/8 buttons.
Size: 55mm x 30mm.
Operating Voltage: 12V.
Operating Current: 12mA.
Transmitting Power: 10mw.
Modulation Mode: ASK (AM).
Encoding Type: Learning.
Transfers Distance: 80m.
Specifications Of The Receiver:
RF Frequency: 433MHz.
Maximum load: ?10A.
Input power: AC 90V-250V.
Static current: 3.6 mA ~ 5.5mA.
Receive sensitivity: >97dbm.
RF working mode: superheterodyne.
Transmitting distance: >50m ( open space).
Decoding mode: MCU software decoding.
Remote storage: 25pcs.
Support remote type: 1527 Learning code, 2262 Fixed code(Rolling code can be design).
Working mode: Momentary, Toggle, Latching, Time delay (5s ,10s ,15s,20s ), Automatic energize when power on.
Wiring type: fixed terminal.
Learning style: Learning Button.
Working temperature: -20 degrees 80 degrees.
Dimension of PCB: 55*32*18mm (L,W,H).
Notice:
Different Options Include Different Packages.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Automatic energize when power on: when power supply, the relay connects.
Clearing the code:
Push the learning button on the receivers for 9 times , until the LED indicator OFF and then flash,until it flash for 5 times. it mean the code have been cleared successfully,
After clearing the code, all the remote control can not work any more.
Learning the code: (Momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be on, it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code: (Toggle)
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
Learning the code: (Latching)
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will be on,
Push the remote button A,
LED flash for 3 times .
Push the remote button B .
Led indicator flash for 3 times and then come off,
learning successfully.
A = ON , B = OFF .
Learning the code: (Time delay mode)
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
Push the learning key on the receiver seventh time , the time delay for 20 seconds .The LED indicator will be on .Push the remote button , LED indicator flashes 3 times and then off, learning successfully .
Learning the code: (Automatic energize when power on)
Push the learning key on the receiver eight times , it comes into setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
NOTE:
1.The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
2. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
3. After deleted the data, all the remote controls cannot work any more.