433MHz RF Wireless Remote Control 5V 2A 1CH Receiver Module and Transmitter Remote Control for LED/Light/strip Controller
Product Application Area
middotWireless control LED lamp string, Christmas tree light string, light control switch
Product Detail
Working voltage : DC 3.6V~24V
Cahnnel : 1 channel
Input vlotage : DC 3.6V~24V
Output vlotage : DC 3.6V~24V
Quiescent Current : 3.6 mA ~ 5.5mA
Maximum load : 2A
RF frequency : 433MHz
Working temperature : -20~+80 degrees
Receiving Sensitivity : -107dBm
Amount of storage remote controls : 10 pieces
Support encoding : EV1527 Leaning code
RF Operating mode : ASK superheterodyne wireless reception
Size : 22.5*11*6mm
Receiving range : Open space is more than 50 meters
Remote operating mode : Momentary Mode / Toggle Mode /Latched Mode
Package include
Light Switch Controller Module (QA-R-010) * 1pcs
Wiring Diagram
Operating Mode
You can match the Remote Control with the Receiver Switch Module in 3 modes.
Momentary Mode:
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off.
Toggle Mode:
1. Press button "A", relay will turn on;
2. Press button "A" again, this relay will turn off.
Latched mode:
1. Press button "A", relay will turn on;
2. Press button "B", this relay will turn off.
Delete the existing data about operating modes
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
2. After deleted the data, all the remote controls cannot work any more.
Set up
Set up(Momentary)
1. Press the learning button(on the Receiver) once. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Toggle)
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;
2. Press one button on the remote control. Wait for 3 seconds. Succeed.
Set up(Latched)
1. Press the learning button(on the Receiver) triple. Wait for 3 seconds;
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.
Note:
Delete the existing data before you want to change the operating mode of one remote control.
On this products details page, there is a demonstration video available.