Description:. Arduino Nano is an Arduino board based on ATmega328 (Arduino Nano 3.x). It is functionally identical to the UNO, but smaller and has a breadboard-friendly footprint. It works with a Mini-B USB cable instead of a DC power jack for the ext
Description: Arduino Nano is an Arduino board based on ATmega328 (Arduino Nano 3.x). It is functionally identical to the UNO, but smaller and has a breadboard-friendly footprint. It works with a Mini-B USB cable instead of a DC power jack for the external power source. It also has more or less the same electrical functionality of the Arduino Duemilanove with more analog input pins and onboard +5V AREF jumper. The Arduino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically sensed and selected to the highest voltage source. Header pins are unsoldered and require the user to solder if required. Specifications: Microcontroller: Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Power Consumption: 19mA Digital I/O Pins: 14 (of which 5 provide PWM output) Analogue Input Pins: 8 DC Current per I/O Pin: 40mA Flash Memory: 32KB (of which 2KB is used by the bootloader) SRAM: 2KB EEPROM: 1KB Clock Speed: 16MhZ Colour: Blue Dimensions: 0.70? x 1.70? Weight: 7g Application: Great for DIY projects Features: Automatic reset during program download Power OK blue LED Green (TX), Red (RX) and Orange (L) LED +5V to AREF Jumper Auto-sensing/switching power input Small mini-B USB for programming and serial monitor ICSP header for direct program download Power OK blue LED on the bottom Standard 0.1? spacing DIP (breadboard friendly) Manual reset switch Contents: 1x Arduino Nano 3.0 Module
Description:. Arduino Nano is an Arduino board based on ATmega328 (Arduino Nano 3.x). It is functionally identical to the UNO, but smaller and has a breadboard-friendly footprint. It works with a Mini-B USB cable instead of a DC power jack for the ext