ADS1015 breakout board:
This module is a breakout board for the Instruments ADS1015 ADC Texas. This device provides an accuracy of 12 bit analog-digital (ADC) resolution. Designed with precision, low power consumption and ease of implementation in mind. The ADS1015 has an integrated reference and an oscillator. A serial I2C interface enables an interface with only two pins on the module and the slave address can be configured to one of four addresses, so that several modules can be connected with one I2C bus. The ADS1015 can perform conversions at rates of up to 3300 samples per second (PLC). A board PGA is available that can provide input ranges from the supply as low as ± 256mV so that both large and small signals can be measured with high resolution. The ADS0115 also has an input multiplexer (MUX) that provides two or four differential unbalanced inputs.
The ADS1015 works either in continuous converter mode or a single-shot mode, which automatically switches off after sales and greatly reduces power consumption during idle times.
ADC bit rate: 12 bits
Interface type: I2C
Channels: 4-channel AN0 AN1 AN2 AN3 or 2 differential inputs
Input voltage: 2.0-5.5v
Channel input voltage: 0-VDD
Continuous operation: only 150?A
Single shot mode: automatic shutdown
Programmable data rate: 8sps-860sps
Input area programmed control, 7 types of input areas:
-0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,
-2.048 V ~ + 2.048 V, -4.096 V ~ + 4.096 V, -6.144 V ~ + 6.144 V.
I2C 7-bit addresses between 0x48-0x4B
Size: 18mm * 28mm