ESP8266 Clock Module Development Board with 0.96in Display 18650 Battery Holder
Feature:
1. 0.96in : 0.96in can display the time intuitively for easy reading, clear and convenient
2. Not Easy to Dry Joint: Using sophisticated manufacturing technology, not easy to dry joint, suitable for electronic equipment, electronic DIY
3. Connect to Other Device Modules for Development: Leading pins can be connected to other device modules for development, easy to operate
4. Five Buttons: Five way button connected to five pins is equivalent to five buttons, come with good performance
5. MicroUSB Automatic Programming: Come with microUSB automatic programming function, you can charge the battery and program the ESP8266 through the microUSB interface
Specification:
Item Type: ESP8266 Clock Module
Material: PCB
Working Voltage: DC 5V(USB power supply)
Battery Type: CR122C button battery
Battery Capacity: 150mAh
Purpose: Use the microUSB interface to charge the battery and program the ESP8266
Applicable Scenarios: Electronic equipment, electronic DIY
Package List:
1 x ESP8266 Clock Module
1 x Pin Header
Note:
1. Remove the 18650 lithium battery during programming to avoid programming failure. It is best to use a charging current from 500MA to 1A for USB charging. If the current is too high, the charging chip may generate serious heat.
2. Please install the positive and negative poles of the battery correctly, the charging chip will be damaged in the moment when the battery is installed incorrectly, and it may cause the battery to explode. Pay special attention! ! !