The Following Details Prroduct ONLY ORDER Separately SKD
1, 1/2/3 soros touch switch 220v wall Light Switch,EU Standard smart home switch
2, Super sensitivity-Just need touch it light, Blacklight display on and of on the Crystal Glass.
3, the base is made of high temperature resistant PC material, making the switch durable and longer life.
4, Single live wire control, easy to install, replace the old switch directly.
5, Touch control ensures longer service life than traditional switch.
6, Protection of over-current, anti-interference, Certification: CE, ROHS, FCC, EU.
7, Elegant look, Suited greatly with many modern decor styles. It can be applied to drawing room, bedroom, corridor, kitchen, bathroom, Office and so on.
Product Introduction:
1, Brand Name: UBARO
2, Button:1 soros, 2 soros, 3 soros for you choose
4, Size: 8.6*8.6mm (L*W)
5, Current: 10A
6, Watt:5-300W/ soros
7, Working Voltage: 170V-240 V AC
8, Working Temperature: -20 ?~+70?
9, Relative Humidity: 10% ~ 90%
10, Mechanical Life: 100000 Times
11, Certification: CE,CCC ,ROHS
12, Gross weight: 0.085kg/Net weight: 0.055kg
13, Package dimensions: 9.0*9.0x4.0cm/3.5x3.5x1.55(L*W*H)
Package:
1*Touch Switch
2*Long Screw
1*Safety X capacitor
1 * User Manual
1*Package box
Note: Installation Precautions
1, You have to cut off the power and during the installation.
2, Single firewire design.No need to open the wall rewiring,diret replacement of the old switch.
Touch switch SKD 1PCS sold without panel
The switch picture shown in the figure below is a product sold without a panel. The glass panel shown clearly tells you that you need to configure it before it can be used normally. The panel needs to be purchased separately.
How to use Capacitors
The figure below is a schematic diagram of installing the capacitor: the installed load bulb is a halogen lamp, led bulb, smart bulbs or bulbs less than 5W need to install this yellow safety capacitor, the capacitor is connected in parallel between the control live wire and the neutral wire
HOW TO INSTALLION THE SWITCH
The following figure is a schematic description of the installation of our company’s products. The installation of this product must be powered off
Switch installation video
1. It needs to be powered off during installation
2. Please correctly connect the ‘L’ position to 220V live Wire
3. ‘L1’L2’L3’ respectively position to control the live wire of the bulb
4. The figure below is a schematic diagram of installing the capacitor: the installed load bulb is a halogen lamp, led bulb, smart bulbs or bulbs less than 5W need to install this yellow safety capacitor, the capacitor is connected in parallel between the control live wire and the neutral wire
Your favorite switch is here
single live wire control touch switch
wireless remote control switch
tuya app smart wifi switch