86 Wall Panel Remote Control 433Mhz AC 110V 220V 2CH RF Relay Receiver 2 button For Light Bulb Lamp Wall Switch
RF Output of Good Stability
Wide Availability
Standard size,universal for the world
Perfect Craft & Detail Control
NO : Normal open COM : Common NC : Normal closed
Flexible use , Strong signal penetration
Easy to use, no need to connect circuits
Excellent Detail Design
Product Detail
Working Voltage : AC85V-250V
Output voltage : 1~250V
Quiescent Current : <5MA
Max current : 10A
RF frequency : 433MHz
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Leaning code/2262 fixed code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 500 meters
Remote operating mode : Momentary Mode /Toggle Mode /Latched Mode
Package include
Receiver module ( include Shell )
Remote Control (include battery )
Product Manual
Wiring Diagram
Operating Mode
You can match the Transmitter with the Relay Receiver Module in 4 modes.
Momentary Mode:
1. Press and hold one button, relay "1" will turn on,
2. Release the button, this relay "1" will turn off.
Toggle Mode:
1. Press button "A", relay "1" will turn on,
2. Press button "A" again, this relay "1" will turn off.
Latched mode:
1. Press button "A", relay "1" will turn on,
2. Press button "B", relay "2" will turn on, at the same time relay "1" will turn off.
Delete the existing data about operating modes
Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.
Note:
1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
2. After deleted the data, all the remote controls cannot work any more.
Set up
Set up(Momentary)
1. Press the learning button(on the Receiver) once. Wait for 3 seconds,
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.
Set up(Toggle)
1. Press the learning button(on the Receiver) twice. Wait for 3 seconds,
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.
Set up(Latched)
1. Press the learning button(on the Receiver) triple. Wait for 3 seconds,
2. Press button "A" on the remote control. Wait for 3 seconds.
3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.
Note:
Delete the existing data before you want to change the operating mode of one remote control.
On this product detailed page, there is a demonstration video for your reference.