[technical parameters]
Product model: CLRC663-PL
The card reading distance is divided into 3 types according to the agreement.
ISO14443A:D = 85mm (Note: quality depends on a and position)
ISO14443B:D = 30mm (Note: quality depends on a and position)
ISO15693:D = 95mm (Note: quality depends on a and position)
Write card distance: to be measured
Working current is 40mA (minimum value), 50mA (typical value), 60mA (max value) DC3.3V.
Idle current: < 10mA DC3.3V
Module power supply: DC5V (SGM2019-3.3V LDO chip on board).
Control interface: UART / SPI / I2C (users can modify themselves, initially set as UART interface).
Module size: 100mm x 65mm
[delivery list]
CLRC663-PL module: 1,
S50 (ISO14443A protocol) ordinary white card: 2 cards, [Note: the size of 85.6mm * 54mm]
/ / this item can not provide {SRT512 (ISO14443B protocol) white card: 1, (Note: the card size 85.6mm x 54mm]} can be tested with a second generation ID card.
I-Code2 (ISO15693 protocol) self-adhesive flexible label card: 2. [Note: the size of the card is 50mm * 50mm]
CLRC663 supports the type of IC card: 14443A & B, 15693, S20, S50 and S70. For details, please see the chipbook.
Read/write mode supporting:
ISO/IEC 14443A/MIFARE,
ISO/IEC 14443B,
JIS X 6319-4 (comparable with FeliCa scheme),
ISO/IEC 15693,
ICODE EPC UID/ EPC OTP,
ISO/IEC 18000-3 mode 3/ EPC Class-1 HF.
Passive initiator mode according to ISO/IEC 18092.
[software programming reference]
The seventh chapter in the Chinese version of ISO 14443 protocol.Pdf: initialization and conflict avoidance, the eighth chapter: transport protocol.
Use RC663_ISO14443A_4byteUID.jcf script file to read S50 card serial number test.
Use the RC663_ISO14443B_ReqB_N2ID.jcf script file to test the second generation of identity card response (ReqB).
Use RC663_ISO15693_Inventory.jcf script file to read 15693 dry glue card test.
A script file can be opened with a notepad.
NXP's official website reference routine.
In addition, the specific meaning of each register assignment depends on the CLRC663.pdf document.
Please note: we are unable to provide programming support for CLRC663 at the present stage. For transplant development, please refer to NXP's official website routines.
Please note: we are only providing a hardware platform at the stage, debugging and testing using official website program.
[about control interface]
[test mode]
Using NXP to provide CLRC663PcSerial.3.6.exe application, you can easily debug / test CLRC663-PD module.
In this way, users need to be prepared for the RS232 adapter plate, connected with the CLRC663-PD module.
In addition, you can see the AN11145.pdf documents of NXP: CLRC663, MFRC630, MFRC631, SLRC610 PC-Serial RS232 and low power card.
The CLRC663PcSerial.3.6.exe application interface is like the following figure (please select the serial port connected to the module).
The S50 IC card of ISO14443A protocol uses script file: RC663_ISO14443A_4byteUID.jcf.
The second generation ID card (ISO14443B) uses script file: RC663_ISO14443B_ReqB_N2ID.jcf.
ISO15693A protocol card, using script file: RC663_ISO15693_Inventory.jcf.