CAN-BusCANCAN8USB-CANCANCAN
USB-CANECAN ToolsCAN TestCAN Pro
USB-CAN.
LinuxLinuxECAN-PC
USB CAN-II C USB-CANCAN TestCAN ProUSB-CAN II/II+(2A)USBCAN-2E-UCAN TestDBC
CANCAN
USB CAN
32MCU8000/1M
-40~+853×24
USB5VUSB5VDC
This type of device does not support the Linux operating system. If you need to use it in the Linux environment, please purchase the ECAN-PC device. Please click the model to enter the link for details.
USB CAN-II C is a universal USB-CAN analyzer, and dual channel devices can run Zhou Ligong CAN Test software and Zhou Ligong CAN Pro software. Can replace II/II+ ZLG USB-CAN (2A), compatible with USBCAN-2E-U, run the new CAN Test software, support DBC function.
All CAN bus analyzers in our company can be used for developing, testing, managing and maintaining CAN bus network. Recording, sending and receiving bus data and matching with corresponding software can make your work get twice the result with half the effort.
The third generation USB CAN analyzer, which is packed with all aluminum alloy shell, increases the ability to resist interference and is both strong and portable.
After the installation and drive, the plug and play can be realized, and it is very convenient.
The internal control uses the industrial 32 bit high speed MCU, which ensures fast response and takes account of stability at the same time. The receiving and sending speed is greater than 8000 frames / sec, that is, when the baud rate is set to the maximum 1M, data is not lost.
The product is manufactured by industrial chip. It is not only lost through -40, ~+85, high and low temperature aging test, but also after 3 hours and 24 hours of full load transceiver data test.
All products are produced in factory production line, and the circuit board by the machine and artificial double detection. In order to ensure that all products of the factory, the factory is reliable and consistent.
Use USB and 5V double circuit power supply. When the load of the USB line is not enough to provide enough current, an independent 5V direct DC plug can be used to improve the power supply stability of the system.
The magnetic coupling isolation connection mode is used to isolate the high voltage common mode signal on the bus, increase the life of the product, improve the stability of the whole system, and ensure that the data is not disturbed.
Conform to the ISO11898 standard, the standard CAN-Bus channel.
Each CAN channel is an independent channel and can be debugged with multiple CAN at the same time without being affected by each other.
With protocol parsing, we can resolve protocols such as CAN Open, Devicenet, SAE J1939, ICAN and so on. These protocols will be used by users who control imported devices, drivers, sensors or automotive electronics. If you are not very familiar with these protocols, this function can help you speed up the project process.
Our company has launched a new software that supports DBC for auto electronic users. This software supports the introduction and parsing of the J1939 protocol DBC files. Using the parsing function, you can intuitively see the meaning of data and part of vehicle parameters in the frame data sent by ECU, which can be used to solve the CAN signal and debug maintenance of vehicle. It is an essential tool for users of automotive electronics, saving you a lot of time.
The built-in 120 Omega resistor can be selected by the dial switch.
Support CAN2.0A and CAN2.0B protocols, including standard frames and extended frames.
The protocol frame can be sent to simulate the master or from the device to perform the simulation operation.
32 hardware FIFO (first in first out) buffer, with a maximum receiving capacity of 8000 frames per second.
The baud rate is adjustable between 10Kbps~1Mbps (if 5K baud rate is required to contact customer service) and is configured by the host computer software.
The product driver supports the 32/64 - bit operating system, such as win 98/2000/2003/me/xp/7/8.
The program on the CAN bus can be written by sending files, such as program burning for ECU, and burning software must be developed by ourselves.
All the products in this shop support two development, and provide a complete two development technical support, detailed for two development.
The latest version of CAN Test software.
1. new upgraded ZLG CAN Test general test software, a new software interface, supporting DBC file loading, DBC parsing.
2., the core function, DBC protocol parsing, can resolve the general data meaning of vehicle bus. This function is very convenient for vehicle data cracking, and is an essential function for automotive electronics.
3., the function of sending data in time sequence can set up sending data according to time sequence, set up 100 data at most, set the sending interval and sending times. This function is convenient to debug the equipment that needs to send data in time sequence.
CAN Test
——DBC
CAN Pro software
1. the protocol can be parsed, including DeviceNet, SAE J1939, CANOpen, ICAN, etc. based on CAN-BUS network. This function speeds up the project process for users who are not aware of the CAN protocol.
2. can configure and parse custom protocols.
3., it has the function of data interrupt triggering. It can trigger the sending according to the configured rules, then it can set the configured protocol frame when the specified protocol frame is received. This function can be used for special message location and detection.
4. filter display function, which can not display the specified protocol frame, and can also label the data in the protocol frame. This function is convenient to filter out the data that you do not want to see, and to facilitate data analysis.
5. very strong data analysis function. It can be set to display a good alias when receiving a certain frame ID, and can also be classified according to many rules. It is convenient for data analysis and management.
6. can classify the received messages according to rules, and the classification rules are very rich. This function is convenient for data analysis.
7. a number of software can be run on the same computer, and there is no interference between the devices.
8. message conversion function, the message can be received in the conversion, binary, sixteen, and so on.
9., the list sending function is very humanized. It can directly add the right-click of the received data to the sending list, and the data in the sending list can be sent on time and orderly, and the sending list can be loaded / saved, and the software configuration information can also be loaded / saved.
ECAN ToolsUSBCAN-IICECAN ToolsUSBCAN-I/II Pro
1.
“ID”“”
2. CAN
CANexcel
CANECUbootloder
3.
A.100k250K500K…B.
4.
IDID
5. CANUSBCAN-II Pro
CAN2CANCAN1CAN2
6. USBCAN-II Pro
.txtCANCAN
7.
CAN
8.
USBCANOEM
IDID
VBVCEVC.NETLabview
LOGO
Specifications
Material
+