• -43%

1db CC1101 vezeték nélküli modul SMA antenna vezeték nélküli adó-vevő modullal Arduino 315/433/868 / 915MHZ

1db CC1101 vezeték nélküli modul SMA antenna vezeték nélküli adó-vevő modullal Arduino 315/433/868 / 915MHZ

179 Ft 43% megtakarítás
314 Ft
Nincs adó
HZ1101K micropower wireless communication module, adopt the Chipcon company's high-performance CC1101 (CC1100 upgrade improved version) wireless communication chip, the maximum transmission rate of 500 KBPS, open transmission distance up to 300-300 meters, has the functions such as wireless sensei, achieve - 110 BBM sensitivity, high reliability, can be widely used in various occasions of short distance wireless communication field.
Resources: http://pan.baidu.com/s/1nuxLFoH welcome to share
Remark:

1. This product adopts high quality components, crystals - 40 ~ 85 degrees, is suitable for hot summer and cold winter in the north of the south
2. The inductance are murata winding inductance, winding inductance high Q value, but the price is about 10 times of laminated inductance, and laminated inductance low quality factors easy ageing, are also USES the original murata capacitors.
3. The antenna is pure copper process and each antenna test resonant frequency.
4. Each module to communicate the functional test
5. Focus on wireless nine years, long-term supply of the goods time stability

Features:
(1) working voltage: 1.8 V to 3.6 V, recommend close to 3.3 V, but not more than 3.6 V
(2), 315, 433, 868, 915 mh ISM and SRD spectrum
(3) the highest rate at 500 KBPS, 2 FSK, GFSK and MSK modulation mode
(4) high sensitivity (DDM under 1.2 KBPS - 110, 1% packet error rate)
(5) built-in hardware CRC error detection and control point to multipoint communication address
(6) low current consumption (RX, 15.6 mA, 2.4 KBPS, 433 MHZ)
(7) programmable control output power and support for all frequencies up to 10 DBM
(8) wireless wake up function, support low power electromagnetic activation function, wireless awakens the equipment of low power sleep mode
(9) support automatic cleaning before transmission channel access (CCA), listen for the carrier system
(10) frequency synthesizer with fast frequency hopping system
(11) module address can be set software, software programming is very convenient
DIP spacing (12) standard interface for embedded application
(13) separate 64 byte RX and TX FIFO data
(14) transmission distance: 200 m (according to the condition of the specific environment and communication baud rate setting, etc.)
Wireless Module


 
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

1PCS CC1101 Wireless Module With SMA Antenna Wireless Transceiver Module For Arduino 315/433/868/915MHZ
HZ1101K micropower wireless communication module, adopt the Chipcon company's high-performance CC1101 (CC1100 upgrade improved version) wireless communication chip, the maximum transmission rate of 500 KBPS, open transmission distance up to 300-300 meters, has the functions such as wireless sensei, achieve - 110 BBM sensitivity, high reliability, can be widely used in various occasions of short distance wireless communication field.
Resources: http://pan.baidu.com/s/1nuxLFoH welcome to share
Remark:

1. This product adopts high quality components, crystals - 40 ~ 85 degrees, is suitable for hot summer and cold winter in the north of the south
2. The inductance are murata winding inductance, winding inductance high Q value, but the price is about 10 times of laminated inductance, and laminated inductance low quality factors easy ageing, are also USES the original murata capacitors.
3. The antenna is pure copper process and each antenna test resonant frequency.
4. Each module to communicate the functional test
5. Focus on wireless nine years, long-term supply of the goods time stability

Features:
(1) working voltage: 1.8 V to 3.6 V, recommend close to 3.3 V, but not more than 3.6 V
(2), 315, 433, 868, 915 mh ISM and SRD spectrum
(3) the highest rate at 500 KBPS, 2 FSK, GFSK and MSK modulation mode
(4) high sensitivity (DDM under 1.2 KBPS - 110, 1% packet error rate)
(5) built-in hardware CRC error detection and control point to multipoint communication address
(6) low current consumption (RX, 15.6 mA, 2.4 KBPS, 433 MHZ)
(7) programmable control output power and support for all frequencies up to 10 DBM
(8) wireless wake up function, support low power electromagnetic activation function, wireless awakens the equipment of low power sleep mode
(9) support automatic cleaning before transmission channel access (CCA), listen for the carrier system
(10) frequency synthesizer with fast frequency hopping system
(11) module address can be set software, software programming is very convenient
DIP spacing (12) standard interface for embedded application
(13) separate 64 byte RX and TX FIFO data
(14) transmission distance: 200 m (according to the condition of the specific environment and communication baud rate setting, etc.)
Wireless Module


 
33058767500 - greatit
33058767500

Hasonló kategóriák mint 16 :

Reviews

Write your review

1db CC1101 vezeték nélküli modul SMA antenna vezeték nélküli adó-vevő modullal Arduino 315/433/868 / 915MHZ

HZ1101K micropower wireless communication module, adopt the Chipcon company's high-performance CC1101 (CC1100 upgrade improved version) wireless communication chip, the maximum transmission rate of 500 KBPS, open transmission distance up to 300-300 meters, has the functions such as wireless sensei, achieve - 110 BBM sensitivity, high reliability, can be widely used in various occasions of short distance wireless communication field.
Resources: http://pan.baidu.com/s/1nuxLFoH welcome to share
Remark:

1. This product adopts high quality components, crystals - 40 ~ 85 degrees, is suitable for hot summer and cold winter in the north of the south
2. The inductance are murata winding inductance, winding inductance high Q value, but the price is about 10 times of laminated inductance, and laminated inductance low quality factors easy ageing, are also USES the original murata capacitors.
3. The antenna is pure copper process and each antenna test resonant frequency.
4. Each module to communicate the functional test
5. Focus on wireless nine years, long-term supply of the goods time stability

Features:
(1) working voltage: 1.8 V to 3.6 V, recommend close to 3.3 V, but not more than 3.6 V
(2), 315, 433, 868, 915 mh ISM and SRD spectrum
(3) the highest rate at 500 KBPS, 2 FSK, GFSK and MSK modulation mode
(4) high sensitivity (DDM under 1.2 KBPS - 110, 1% packet error rate)
(5) built-in hardware CRC error detection and control point to multipoint communication address
(6) low current consumption (RX, 15.6 mA, 2.4 KBPS, 433 MHZ)
(7) programmable control output power and support for all frequencies up to 10 DBM
(8) wireless wake up function, support low power electromagnetic activation function, wireless awakens the equipment of low power sleep mode
(9) support automatic cleaning before transmission channel access (CCA), listen for the carrier system
(10) frequency synthesizer with fast frequency hopping system
(11) module address can be set software, software programming is very convenient
DIP spacing (12) standard interface for embedded application
(13) separate 64 byte RX and TX FIFO data
(14) transmission distance: 200 m (according to the condition of the specific environment and communication baud rate setting, etc.)
Wireless Module


 

Write your review