- -43%
Új 3D nyomtató Hot Bed MOSFET Power Expansion Board / Heat bed Power Module Anet A8 A6 A2 Compate Black Ramps 1.4-hez
Új 3D nyomtató Hot Bed MOSFET Power Expansion Board / Heat bed Power Module Anet A8 A6 A2 Compate Black Ramps 1.4-hez
279 Ft
43% megtakarítás
490 Ft
Nincs adó
*Completely solve the hot bed power is too large and the load current issue
*Under the premise of normal cooling, it work stable under I(Max)=20A,
the current must not exceed 20A while the process working
*If you need anything greater or equal to 15A this module is a must! For example,
if your total power usage is 240W and you have 12V power supply, then it means at least 20A is needed (20X12=240W).
*As ChiTu controller board is only capable of 15A this setting will not work. To make it work,
you need this extra power module.
*Dimensions: 60*50mm
*Under the premise of normal cooling, it work stable under I(Max)=20A,
the current must not exceed 20A while the process working
*If you need anything greater or equal to 15A this module is a must! For example,
if your total power usage is 240W and you have 12V power supply, then it means at least 20A is needed (20X12=240W).
*As ChiTu controller board is only capable of 15A this setting will not work. To make it work,
you need this extra power module.
*Dimensions: 60*50mm
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
