• -40%

ÚJ GS-100A LED féklámpa villogó villogó vezérlődoboz

ÚJ GS-100A LED féklámpa villogó villogó vezérlődoboz

298 Ft 40% megtakarítás
497 Ft
Nincs adó
GS-100A LED Brake Stop Light Strobe Flash Flashing Controller Box
 
Technical Parameters
Input voltage: 5-28V
Output voltage: 5-28V (output voltage = output voltage)
Input current: 0-2A (max)
Output current: 0-2A (max)
Output power: 48W (max)
Product size: 40 × 20 × 11 (mm)
Online: 13.5CM
Weight: 16g
Lead definition: yellow input positive, red output positive, black negative
Flash mode: first turn on the light, then power on, flash 4 times and then flash 5 times, then keep constant until power is off, and cycle when power is on again.
Note: The module is direct output, no output protection, be sure to connect the output terminal before connecting the power supply to prevent the module from being burned by short circuit.
 
Mennyiség

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

ÚJ GS-100A LED féklámpa villogó villogó vezérlődoboz
NEW GS-100A LED Brake Stop Light Strobe Flash Flashing Controller Box
GS-100A LED Brake Stop Light Strobe Flash Flashing Controller Box
 
Technical Parameters
Input voltage: 5-28V
Output voltage: 5-28V (output voltage = output voltage)
Input current: 0-2A (max)
Output current: 0-2A (max)
Output power: 48W (max)
Product size: 40 × 20 × 11 (mm)
Online: 13.5CM
Weight: 16g
Lead definition: yellow input positive, red output positive, black negative
Flash mode: first turn on the light, then power on, flash 4 times and then flash 5 times, then keep constant until power is off, and cycle when power is on again.
Note: The module is direct output, no output protection, be sure to connect the output terminal before connecting the power supply to prevent the module from being burned by short circuit.
 
32964004611 - tenstar
32964004611

Hasonló kategóriák mint 16 :

Reviews

Write your review

ÚJ GS-100A LED féklámpa villogó villogó vezérlődoboz

GS-100A LED Brake Stop Light Strobe Flash Flashing Controller Box
 
Technical Parameters
Input voltage: 5-28V
Output voltage: 5-28V (output voltage = output voltage)
Input current: 0-2A (max)
Output current: 0-2A (max)
Output power: 48W (max)
Product size: 40 × 20 × 11 (mm)
Online: 13.5CM
Weight: 16g
Lead definition: yellow input positive, red output positive, black negative
Flash mode: first turn on the light, then power on, flash 4 times and then flash 5 times, then keep constant until power is off, and cycle when power is on again.
Note: The module is direct output, no output protection, be sure to connect the output terminal before connecting the power supply to prevent the module from being burned by short circuit.
 

Write your review