Forró OPCOM opel V1.70 OPCOM-hoz a legjobb zöld NYÁK valódi PIC18F458 chip OBD2 CAN busz az Opel obd2 Professional diagnosztikai eszközhöz
Hot OPCOM for opel V1.70 OPCOM with Best Green PCB Real PIC18F458 chip OBD2 CAN BUS for Opel obd2 Professional diagnostic Tool
[xlmodel]-[custom]-[8888]
More Information
Profession OP COM opel V1.70 OPCOM with Best Green PCB Real PIC18F458 chip OBD2 CAN BUS for Opel obd2 Professional diagnostic Tool
Please note:
Due to insufficient supply of chips in the market, FT232RL and FT232RQ chips will be sent randomly, so those who mind should be cautious in buying
Opcom V1.70
Feature:
1. OPCOM is a special PC Based diagnostic interface especially for OPEL.
2. Software Version:120309a
Firmware Version:1.70
3. Never Update Online. Online Updation Will Damage The OP-COM
Function:
1. It covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C, for Astra-H, for Zafira-B etc.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or for B0sch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers:
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package list:
1pc x OP COM Interface
1pc x USB Cable
1pc x CD with Software and Drivers
[xlmodel]-[photo]-[0000]
Photos List
32964850016 - syobd