• -43%

GY-30 - GY-302 GY-30 BH1750 BH1750FVI Az arduino 3V-5V modul BH1750FVI digitális optikai fényintenzitás-érzékelője

GY-30 - GY-302 GY-30 BH1750 BH1750FVI Az arduino 3V-5V modul BH1750FVI digitális optikai fényintenzitás-érzékelője

125 Ft 43% megtakarítás
220 Ft
Nincs adó
GY-302 Description:
1  ROHM original BH1750FVI chip
2. Power supply: 3-5v
3. Light intensity range: 0-65535 lx
4. Sensor built-in 16bitAD converter
5. Direct digital output, omitting complex calculations, omit calibration
6. Does not distinguish between ambient light, close to the visual sensitivity of the spectral characteristics
7. High-precision measurement of 1 lux can be performed for a wide range of brightness
8. Standard NXP IIC communication protocol
9. The module contains communication level conversion, and 5v microcontroller io direct connection
 
Note:
1. The module pin is not welded up, with pin, you need the user's own welding.
2. The working voltage of this module is 3-5v, do not use the power outside the range.
3. OUR chip to provide information, program code, and related schematics and circuit diagrams, because the information provided has been very detailed, so the other expansion and use, the user needs their own research.
Mennyiség
Add to Compare
Add to Wishlist

 

Biztonsági feltételek

 

Szállításii feltételek

 

Visszaküldési feltételek

A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
GY-302 GY-30 BH1750 BH1750FVI Az arduino 3V-5V modul BH1750FVI digitális optikai fényintenzitás-érzékelője
GY-302 GY-30 BH1750 BH1750FVI The digital optical intensity illumination sensor BH1750FVI of module for arduino 3V-5V
GY-302 Description:
1  ROHM original BH1750FVI chip
2. Power supply: 3-5v
3. Light intensity range: 0-65535 lx
4. Sensor built-in 16bitAD converter
5. Direct digital output, omitting complex calculations, omit calibration
6. Does not distinguish between ambient light, close to the visual sensitivity of the spectral characteristics
7. High-precision measurement of 1 lux can be performed for a wide range of brightness
8. Standard NXP IIC communication protocol
9. The module contains communication level conversion, and 5v microcontroller io direct connection
 
Note:
1. The module pin is not welded up, with pin, you need the user's own welding.
2. The working voltage of this module is 3-5v, do not use the power outside the range.
3. OUR chip to provide information, program code, and related schematics and circuit diagrams, because the information provided has been very detailed, so the other expansion and use, the user needs their own research.
4000971989098/2 - sitai
4000971989098/2

Hasonló kategóriák mint 16 :

Reviews

Write your review

Write your review

GY-30 - GY-302 GY-30 BH1750 BH1750FVI Az arduino 3V-5V modul BH1750FVI digitális optikai fényintenzitás-érzékelője

GY-302 Description:
1  ROHM original BH1750FVI chip
2. Power supply: 3-5v
3. Light intensity range: 0-65535 lx
4. Sensor built-in 16bitAD converter
5. Direct digital output, omitting complex calculations, omit calibration
6. Does not distinguish between ambient light, close to the visual sensitivity of the spectral characteristics
7. High-precision measurement of 1 lux can be performed for a wide range of brightness
8. Standard NXP IIC communication protocol
9. The module contains communication level conversion, and 5v microcontroller io direct connection
 
Note:
1. The module pin is not welded up, with pin, you need the user's own welding.
2. The working voltage of this module is 3-5v, do not use the power outside the range.
3. OUR chip to provide information, program code, and related schematics and circuit diagrams, because the information provided has been very detailed, so the other expansion and use, the user needs their own research.

Write your review