- -41%
Modul - EKG modul AD8232 EKG mérő pulzus szív EKG figyelő érzékelő modul készlet Arduinohoz
Modul - EKG modul AD8232 EKG mérő pulzus szív EKG figyelő érzékelő modul készlet Arduinohoz
296 Ft
41% megtakarítás
501 Ft
Nincs adó
Product specifications:
-AD8232 uses a dual high-pass filter to eliminate motion artifacts and electrode half-cell potential
-AD8232 uses an operational amplifier, no need to use restrictions to build a three-pole low-pass filter to eliminate additional noise
-Rated temperature range: 0 -------- 70 degrees
-Operating temperature range: -40 ----- 85 degrees
The AD8232 single-lead heart rate monitor is a cost-effective board for measuring the electrical activity of the heart.
The electrical activity can be plotted as an ECG or electrocardiogram and output as an analog reading.
3. The ECG can be very noisy. The AD8232 single-lead heart rate monitor acts as an operational amplifier and can easily obtain clear signals from the PR and QT intervals.
4. AD8232 is an integrated signal conditioning module for ECG and other biopotential measurement applications.
It is designed to extract, amplify and filter small biopotential signals in the presence of noise conditions (such as those produced by movement or remote electrode placement).
6. The AD8232 heart rate monitor disconnects nine connections from the IC, and you can solder pins, wires or other connectors to it.
7. Use Arduino or other development boards, SDN, LO , LO-, OUTPUT, 3.3V, GND to provide the necessary pins for running this monitor.
RA (right arm), LA (left arm) and RL (right leg) pins are also provided on this board to connect and use your own custom sensors.
In addition, there is an LED indicator, which will beat to the rhythm of the heartbeat.
10. The use of a heart monitor requires a biomedical sensor pad and sensor cable, which can be found in the recommended products section below.
application:
-Fitness and exercise heart rate monitoring
-Portable ECG
-Remote health monitor
-Game peripherals
-Bioelectric signal collection
-AD8232 uses a dual high-pass filter to eliminate motion artifacts and electrode half-cell potential
-AD8232 uses an operational amplifier, no need to use restrictions to build a three-pole low-pass filter to eliminate additional noise
-Rated temperature range: 0 -------- 70 degrees
-Operating temperature range: -40 ----- 85 degrees
The AD8232 single-lead heart rate monitor is a cost-effective board for measuring the electrical activity of the heart.
The electrical activity can be plotted as an ECG or electrocardiogram and output as an analog reading.
3. The ECG can be very noisy. The AD8232 single-lead heart rate monitor acts as an operational amplifier and can easily obtain clear signals from the PR and QT intervals.
4. AD8232 is an integrated signal conditioning module for ECG and other biopotential measurement applications.
It is designed to extract, amplify and filter small biopotential signals in the presence of noise conditions (such as those produced by movement or remote electrode placement).
6. The AD8232 heart rate monitor disconnects nine connections from the IC, and you can solder pins, wires or other connectors to it.
7. Use Arduino or other development boards, SDN, LO , LO-, OUTPUT, 3.3V, GND to provide the necessary pins for running this monitor.
RA (right arm), LA (left arm) and RL (right leg) pins are also provided on this board to connect and use your own custom sensors.
In addition, there is an LED indicator, which will beat to the rhythm of the heartbeat.
10. The use of a heart monitor requires a biomedical sensor pad and sensor cable, which can be found in the recommended products section below.
application:
-Fitness and exercise heart rate monitoring
-Portable ECG
-Remote health monitor
-Game peripherals
-Bioelectric signal collection
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
