Nincs szín - 2,2 hüvelykes UART TFT LCD kijelző modul PL2303 soros For / Raspberry Pi GS-hez

2.2inch UART TFT LCD Display Module w/ PL2303 Serial For /Raspberry Pi GS
Features:1. 2.2 inch LCD
2. Without touch
3. Viewing angle: 176 x 220
4. Driver Port : UART
5. Driver IC : No drive required but your MCU needs a UART port (serial port)
Specification:Material: PCB
Driver Port: UART
Color: Green
Drive IC: No drive required but your MCU needs a UART port (serial port)
Perspective: 176 x 220
LCD Module Size: Approx. 54.8 * 41.3 mm / 2.2 * 1.6 in
5P Dupont Line: 22 cm / 8.7 in
Package list:1 * 2.2 inch UART LCD screen
1 * DuPont Line 4P
1 * DuPont Line 5P
1 * PL2303hx USB To UART Module
Introduction
CMD
Reset
RESET
Get the version information instructions for the module
VER
Set the baud rate command
BPS(bps)
Clear command
CLR(c)
LCD control CMD
LCDON(on_off)
Display the LCD
FSIMG(addr,x,y,w,h,mode)
Image download to FLASH command
FS_DLOAD(SIZE)
Vertical and horizontal screen switch CMD
DIR(H_V)
Set the brightness of the backlight
BL(p)
Draw points
PS(x,y,c)
Draw lines
PL(x1,y1,x2,y2,c)
Draw box
BOX(x1,y1,x2,y2,c)
Draw box with Filled color
BOXF(x1,y1,x2,y2,c)
Draw a circle
CIR(x,y,r,c)
Draw a circle with Filled color
CIRF(x,y,r,c)
Set background color
SBC(c)
Display 16 high character With background color instruction
DCV16(x,y,*str,c)
Display 24 high character With background color instruction
DCV24(x,y,*str,c)
Display 32 high character With background color instruction
DCV32(x,y,*str,c)