- -44%
HX711 - Terhelési cella tömegérzékelő 1 kg 5 kg 10 kg 20 kg HX711 modul elektronikus mérleg alumínium ötvözet
HX711 - Terhelési cella tömegérzékelő 1 kg 5 kg 10 kg 20 kg HX711 modul elektronikus mérleg alumínium ötvözet
77 Ft
44% megtakarítás
138 Ft
Nincs adó
Introduction:
This weighing module is available in 1KG, 5KG, 10KG, 20KG models. The self-contained backplane, 51 single-chip module and display can be used to make electronic scales.
Four leads, easy to use, plus 5-10V driving voltage, direct output as voltage signal due to force changes
[Weighing module size]: 12.7*12.7*80mm
[HX711AD module size]: 16*24mm
[Product Specifications]: 1KG, 5KG, 10KG, 20KG
[Fixed hole]: two 4mm holes; two 5mm holes (requires self-equipped screws)
[Fixed hole distance]: about 14.5mm
[product weight]: about 32 grams
[Wiring method]: Red line is connected to power supply , black line is connected to power supply - green line is connected to output signal , white line is connected to output signal -
[Precautions]: One end of the sensor is fixed by the screw hole, and the other end is kept in a floating state. Gravity is applied according to the direction indicated by the label. Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor.
This weighing module is available in 1KG, 5KG, 10KG, 20KG models. The self-contained backplane, 51 single-chip module and display can be used to make electronic scales.
Four leads, easy to use, plus 5-10V driving voltage, direct output as voltage signal due to force changes
[Weighing module size]: 12.7*12.7*80mm
[HX711AD module size]: 16*24mm
[Product Specifications]: 1KG, 5KG, 10KG, 20KG
[Fixed hole]: two 4mm holes; two 5mm holes (requires self-equipped screws)
[Fixed hole distance]: about 14.5mm
[product weight]: about 32 grams
[Wiring method]: Red line is connected to power supply , black line is connected to power supply - green line is connected to output signal , white line is connected to output signal -
[Precautions]: One end of the sensor is fixed by the screw hole, and the other end is kept in a floating state. Gravity is applied according to the direction indicated by the label. Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor.
Biztonsági feltételek
Szállításii feltételek
Visszaküldési feltételek
