Nincs szín - 2,13 &quot e-Paper HAT E-Ink kijelző modul SPI 212 X 104 Raspberry Pi 2B / 3B /

2.13'' e-Paper HAT E-Ink Display Module SPI 212 X 104 For Raspberry Pi 2B/3B/
Description:This E-Ink display HAT, 2.13inch, 212x104 resolution, is specially designed for Raspberry Pi. With embedded controller, communicating via Serial Peripheral Interface interface, it supports red, black and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an choice for applications such as shelf label, industrial instrument, and so on.
Features:
No backlight, keeps displaying last content for a long time even when power down.
Ultra low power consumption, basically power is only required for refreshing.
Suitable for Raspberry Pi 2B/3B// W.
Preserved solder pads for Serial Peripheral Interface interface, to connect with other controller boards like for /Nucleo, etc.
Comes with development resources and manual (examples for Raspberry//STM32).
Specifications:Operating voltage: 3.3V
Interface: 3-wire Serial Peripheral Interface, 4-wire Serial Peripheral Interface
Outline dimension: 65 x 30.2mm
Display size: 23.71 x 48.55mm
Dot pitch: 0.229 x 0.228
Resolution: 212 x 104
Display color: black, white, red
Grey level: 2
Full refresh time: 15s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°
Package weight: 16g
Interface:VCC: 3.3V
GND: Ground
DIN: Serial Peripheral Interface MOSI pin
CLK: Serial Peripheral Interface SCK pin
CS: Serial Peripheral Interface chip selection, low active
DC: Data/Command selection (high for data, low for command)
RST: External reset, low active
BUSY: Busy status output, low active
Package List:1 x 2.13inch e-Paper HAT (B)
1 x Screws Pack(2set)
1 x PH2.0 8-pin Connecting Cable (20cm)
Note: If you want more tutorials and instructions about this product, please contact us, we will send related information to you.