A cím elején, valamint az első képen szereplő szín/minta/méret/típus kerül kiszállításra!
433MHZ klónozó sokszorosító kulcstartó, távolsági távirányító
433MHZ Cloning Duplicator Key Fob A Distance Remote Control 433MHZ Clone Fixed Learning Code For Gate Garage Door 2021 New
Description:
Working voltage: 12V
Working current: ≤12mA
Working frequency: 433MHZ
Transmitting power: 10-15mw
Launch distance: 100 meters (open and barrier-free)
Frequency deviation: ±0.2MHz
Transmission rate: 50-60KHZ
Applicable type: fixed code/learning code remote control, some rolling code type remote control
Application scope: remote control is widely used; garage doors, electric vehicles, rolling gates, retractable doors, sliding doors, door and window controllers, anti-theft alarms, electric door alarms, MP3 motorcycle anti-theft alarms, industrial controls, smart homes, lamps Control etc.
Function: have the function of copying the remote control and using it alone
Fixed code: HS2260, HS2262, PT2264SC2262, etc.
Learning code: HS1527, EV1527, HT6P20B, etc.
Rolling code: HCS301, HCS300, HCS200 (partial)
Specifications:
Group switching:
Press the second button and the third button of the copy remote control at the same time for more than 1.5S to switch the number of remote control groups.
copy:
One-click copy:
(1) Press and hold the button that needs to be copied on the copy remote control. The LED flashes twice and then goes out. At this time, the button enters the learning state.
(2) Place the remote control close to the copy remote control, press and hold the button of the remote control, the copy remote control LED flashes 3 times and then stays on, which means that the code has been copied successfully.
(3) Other buttons are the same as the above button copy method.
Copy four keys:
When the key value automatically generated by copying compatible brands does not meet the requirements, you can use this function to copy any key value. Under this function, each group of remote control can only copy one brand of remote control. non-encrypted remote control can also use this function.
(1) Press and hold the first button of the copy remote control, the LED flashes twice and then goes out, then the button enters the learning state. Keep the button, short press the second button three times, the LED flashes three times. Enter the four-key copy mode.
(2) Put the remote control close to the copy remote control, press and hold the button of the remote control, the copy remote control LED flashes 3 times and then goes out, this means that the current code has been successfully copied, and the LED will be on after the four consecutive keys are successfully copied. .
Code:
Press the first button and the second button of the copy remote control at the same time, the LED flashes 3 times. One of the buttons is pressed 3 times, the other button is kept, the LED flashes continuously, and all the information is cleared.
One-click code:
Press the first button and the second button of the copy remote control at the same time, the LED flashes 3 times. Release one button and keep the other button. Double-press the button that needs to be coded twice, wait for 2S, the LED flashes continuously, and clear the button information. This function is not available when copying data is a brand remote control.
Return code:
Press the third button and the fourth button of the copy remote control at the same time until the LED flashes quickly to restore the last coded information.
Package Included:
remote control*1
1005003510640715/2 - yasuez